NewMNFJ/project/DebugConfig/can_HK32F030F4Px_1.0.0.dbgconf

// File: STM32F030_070.dbgconf
// Version: 1.0.0
// Note: refer to STM32F030x4/x6/x8/xC, STM32F070x6/xB Reference manual (RM0360)
//       refer to STM32F030x4 STM32F030x6, STM32F030x8 STM32F030xC datasheet
//                STM32F070CB STM32F070RB, STM32F070C6 STM32F070F6 datasheet

// <<< Use Configuration Wizard in Context Menu >>>

// <h> Debug MCU configuration register (DBGMCU_CR)
//   <o.2>  DBG_STANDBY              <i> Debug standby mode
//   <o.1>  DBG_STOP                 <i> Debug stop mode
// </h>
DbgMCU_CR = 0x00000006;

// <h> Debug MCU APB1 freeze register (DBGMCU_APB1_FZ)
//                                   <i> Reserved bits must be kept at reset value
//   <o.21> DBG_I2C1_TIMEOUT         <i> I2C1 SMBUS timeout mode stopped when core is halted
//   <o.12> DBG_IWDG_STOP            <i> Independent watchdog stopped when core is halted
//   <o.11> DBG_WWDG_STOP            <i> Window watchdog stopped when core is halted
//   <o.10> DBG_RTC_STOP             <i> RTC stopped when core is halted
//   <o.8>  DBG_TIM14_STOP           <i> TIM14 counter stopped when core is halted
//   <o.5>  DBG_TIM7_STOP            <i> TIM7 counter stopped when core is halted
//   <o.4>  DBG_TIM6_STOP            <i> TIM6 counter stopped when core is halted
//   <o.1>  DBG_TIM3_STOP            <i> TIM3 counter stopped when core is halted
// </h>
DbgMCU_APB1_Fz = 0x00000000;

// <h> Debug MCU APB2 freeze register (DBGMCU_APB2_FZ)
//                                   <i> Reserved bits must be kept at reset value
//   <o.18> DBG_TIM17_STOP           <i> TIM17 counter stopped when core is halted
//   <o.17> DBG_TIM16_STOP           <i> TIM16 counter stopped when core is halted
//   <o.16> DBG_TIM15_STOP           <i> TIM15 counter stopped when core is halted
//   <o.11> DBG_TIM1_STOP            <i> TIM1 counter stopped when core is halted
// </h>
DbgMCU_APB2_Fz = 0x00000000;

// <<< end of configuration section >>>