first commit

BSP/BSP.c

@@ -0,0 +1,89 @@
+#include "BSP.h"
+#include "app_def.h"
+#include    "IIC_FM1288.h"
+#include    "gpio_key.h"
+
+
+static VU16 s_vu8SysSched0Tmr     = 0;
+static VU16 s_vu8SysSched1Tmr     = 0;
+static VU16 s_vu8SysSched2Tmr     = 0;
+unsigned int LocalTime=0;
+U16 BufSentTime=0;  //bus 数据发送延时
+void SysTick_init(void)
+{
+	//================================================
+	//系统Tick定时配置
+	SysTick_Config(SystemCoreClock / (1000));	  
+	//定时器系统中断
+	NVIC_SetPriority(SysTick_IRQn,(0<<2)+(0));
+	//================================================
+}
+void SysTick_Handler(void)
+{
+    if (s_vu8SysSched0Tmr != 0xffff)   { s_vu8SysSched0Tmr++;    }
+    if (s_vu8SysSched1Tmr != 0xffff)   { s_vu8SysSched1Tmr++;    }
+    if (s_vu8SysSched2Tmr != 0xffff)   { s_vu8SysSched2Tmr++;    }
+	
+    LocalTime ++;   //49天后归0
+    if (UartBusTime != 0xffff)   { UartBusTime++;    }
+    if (BufSentTime != 0)   { BufSentTime--;    }
+    I2cFM1288TaskTmr ();
+    KeyTaskTmr();
+}	
+
+
+
+int BSP_init(void)
+{
+    //===================================
+    NVIC_SetVectorTable(NVIC_VectTab_FLASH,0);	
+    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
+
+    SysTick_init();
+    //===================================
+    TIM1_init();
+    UART_ARM_init();
+    TIM6_init();
+    GPIO_LED_init();
+    GPIO_SYS_init();
+    WDG_Init(4,625);
+    GPIO_KEY_init();
+    //===================================  
+    GPIO_FM1288_Init();
+    //===================================      
+    return 1;
+}
+    
+void BSP_Tick(void)
+{
+
+    if (s_vu8SysSched0Tmr >= OS_TIMER_15MS) {  //dwdtest 15ms
+  		   BUS_Rev_TxTask();
+          s_vu8SysSched0Tmr = 0;
+	}
+    if (s_vu8SysSched1Tmr >= OS_TIMER_35MS) {   /* Schedule 15ms task with priority 0 */
+  		     UART_Tick();
+			    BUSMODE_SendTick();
+           s_vu8SysSched1Tmr = 0;
+	}
+    if (s_vu8SysSched2Tmr >= OS_TIMER_12S) {   /* Schedule 15ms task with priority 0 */
+  		if (gt_busrxflag ==1) {
+			   s_vu8SysSched2Tmr = 0;
+				gt_busrxflag =2;
+  			} else  if (gt_busrxflag ==2) {
+  			      s_vu8SysSched2Tmr = 0;
+						gt_busrxflag =0;
+  			} 
+	}
+     BUS_Rev_Tick();
+   //   UART_Tick();
+    GPIO_LED_Tick();
+    GPIO_KEY_Tick();
+  
+     IIC_FM1288_Tick();
+}
+
+
+
+
+

BSP/BSP.h

@@ -0,0 +1,44 @@
+#ifndef __BSP_H__
+#define __BSP_H__
+
+    #include 	"stm32f10x.h"
+    #include        "TIM1_CAP.h"
+    #include        "UART_ARM.h"
+    #include        "TIM6_1MS.h"
+    #include        "GPIO_LED.h"
+    #include        "WDG.h" 
+    #include        "GPIO_SYS.h"
+    #include 	"GPIO_FM1288.h" 
+    #include        "GPIO_KEY.h"
+    #include       "app_def.h"
+
+
+#define OS_TICKS_PER_SEC         (1000)
+#define OS_TIMER_5MS             (5)
+#define OS_TIMER_10MS            (10)
+#define OS_TIMER_15MS            (15)
+#define OS_TIMER_20MS            (20)
+#define OS_TIMER_30MS            (30)
+#define OS_TIMER_35MS            (35)
+#define OS_TIMER_50MS            (50)
+#define OS_TIMER_80MS            (80)
+#define OS_TIMER_100MS           (100)
+#define OS_TIMER_200MS           (200)
+#define OS_TIMER_300MS           (300)
+#define OS_TIMER_350MS           (350)
+#define OS_TIMER_500MS           (500)
+#define OS_TIMER_800MS           (800)
+#define OS_TIMER_1S              (1000)
+#define OS_TIMER_2S              (2000)
+#define OS_TIMER_3S              (3000)
+#define OS_TIMER_5S              (5000)
+#define OS_TIMER_10S              (10000)
+#define OS_TIMER_12S              (12000)
+#define OS_TIMER_15S              (15000)
+    extern int BSP_init(void);
+    extern void BSP_Tick(void);
+    extern unsigned int LocalTime;
+    extern U16  BufSentTime;
+    
+    
+#endif 

BSP/GPIO_Audio.c

@@ -0,0 +1,35 @@
+#include 		"GPIO_Audio.h"
+
+
+
+int GPIO_Audio_init(void)
+{
+
+
+
+
+    return 1;
+}
+
+void GPIO_Audio_Change(unsigned char channel)
+{
+    switch(channel)
+    {
+        case 0:
+            
+        
+        
+            break;
+        case 1:
+            
+            break;
+        case 2:
+            
+            break;
+        case 3:
+            
+            break;
+    }
+
+}
+

BSP/GPIO_Audio.h

@@ -0,0 +1,11 @@
+#ifndef __GPIO_AUDIO_H__
+#define __GPIO_AUDIO_H__
+    
+
+    #include 		"stm32f10x.h"
+
+
+    extern int GPIO_Audio_init(void);
+    extern void GPIO_Audio_Change(unsigned char channel);
+    
+#endif

BSP/GPIO_FM1288.c

@@ -0,0 +1,82 @@
+#include 		"GPIO_FM1288.h"
+  
+ unsigned char FM1288Led;
+void GPIO_FM1288_Init(void)
+{
+    GPIO_InitTypeDef GPIO_InitStructure;
+    
+    FM1288_RST_RccOpen();
+    FM1288_VADLED_RccOpen();
+    FM1288_PWR_RccOpen();
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE);
+    //================================================
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = FM1288_RST_LINE;  
+    GPIO_Init(FM1288_RST_Port,&GPIO_InitStructure);
+    GPIO_SetBits(FM1288_RST_Port,FM1288_RST_LINE);
+    //================================================
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_IPD;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = FM1288_VADLED_LINE;  
+    GPIO_Init(FM1288_VADLED_Port,&GPIO_InitStructure);
+    //================================================
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_IPU;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = FM1288_PWR_LINE;  
+    GPIO_Init(FM1288_PWR_Port,&GPIO_InitStructure);
+    //================================================ 
+    GPIO_SetBits(FM1288_PWR_Port,FM1288_PWR_LINE);
+
+   /*  FM1288 MUTE  Input control, mutes Line-Out*/
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_13;  
+    GPIO_Init(GPIOB,&GPIO_InitStructure);
+    //================================================ 
+    GPIO_SetBits(GPIOB,GPIO_Pin_13);
+
+   GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_12;  
+    GPIO_Init(GPIOA,&GPIO_InitStructure);
+    //================================================ 
+    GPIO_ResetBits(GPIOA,GPIO_Pin_12);
+    
+}
+
+unsigned char GPIO_FM1288_LED(void)
+{
+    FM1288Led=GPIO_ReadInputDataBit(FM1288_VADLED_Port,FM1288_VADLED_LINE); //0：FM1288工作正常，1表示不正常
+    return FM1288Led;
+}
+
+void GPIO_FM1288_RST(U08 prm)
+{
+   if (prm) {
+	GPIO_SetBits(FM1288_RST_Port,FM1288_RST_LINE);
+   	} else {
+	    GPIO_ResetBits(FM1288_RST_Port,FM1288_RST_LINE);
+   	}
+}
+
+   /*  FM1288 MUTE  Input control, mutes Line-Out*/
+void GPIO_FM1288_Mute(U08 prm)
+{
+   if (prm) {
+		GPIO_SetBits(GPIOB,GPIO_Pin_13);
+   	} else {
+	    GPIO_ResetBits(GPIOB,GPIO_Pin_13);
+   	}
+}
+
+ void GPIO_PA12_BroadcastMute(U08 prm)
+{
+   if (prm) {
+		GPIO_SetBits(GPIOA,GPIO_Pin_12);
+   	} else {
+	    GPIO_ResetBits(GPIOA,GPIO_Pin_12);
+   	}
+}
+
+

BSP/GPIO_FM1288.h

@@ -0,0 +1,30 @@
+#ifndef __GPIO_FM1288_H
+#define __GPIO_FM1288_H
+
+    #include 	"stm32f10x.h"
+#include "app_def.h"
+
+    #include    "WDG.h"
+
+    void GPIO_FM1288_RST(U08 prm);
+    unsigned char GPIO_FM1288_LED(void);
+    void GPIO_FM1288_Init(void);
+    void GPIO_PA12_BroadcastMute(U08 prm);
+   extern void GPIO_FM1288_Mute(U08 prm);
+    
+	//FM1288_RST
+	#define FM1288_RST_Port       			GPIOB				   																						
+	#define FM1288_RST_LINE       			GPIO_Pin_1			   																				
+	#define FM1288_RST_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)    	//ʱÖÓ
+    
+    //FM1288_VADLED
+	#define FM1288_VADLED_Port       		GPIOC				   																				
+	#define FM1288_VADLED_LINE       		GPIO_Pin_4			   																			
+	#define FM1288_VADLED_RccOpen()   	    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+    
+    
+    #define FM1288_PWR_Port       		    GPIOC				   																				
+	#define FM1288_PWR_LINE       		    GPIO_Pin_0			   																			
+	#define FM1288_PWR_RccOpen()   	    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+    
+#endif

BSP/GPIO_IIC_Drv.c

@@ -0,0 +1,625 @@
+#include "GPIO_IIC_Drv.h"
+
+
+unsigned char IIC_ack;           /*应答标志位*/
+//PB11:SDA
+//PB10:SDL
+#define IIC_SDA_3V3_STATE		GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_0)
+#define IIC_SDA_3V3(v)		    ((v == 0) ? (GPIO_ResetBits(GPIOB, GPIO_Pin_0)) : (GPIO_SetBits(GPIOB, GPIO_Pin_0)) )         
+#define IIC_SDA_Chg_in()		SDA_Port_Config(0)
+#define IIC_SDA_Chg_out()		SDA_Port_Config(1)
+#define IIC_SCL_3V3(v)          ((v == 0) ? (GPIO_ResetBits(GPIOC, GPIO_Pin_5)) : (GPIO_SetBits(GPIOC, GPIO_Pin_5)) )  
+/*********************延时函数xus***********************************/
+#define IIC_Delay1us()          IIC_Delayus(1)
+
+void IIC_Delayus(unsigned short Times)
+{
+   unsigned short i=0;  
+   while(Times--)
+   {
+	  i=10;             //自己定义
+	  while(i--) ;	  
+   }
+
+}
+/******************************************************************/
+
+void SDA_Port_Config(unsigned char mode)
+{
+    GPIO_InitTypeDef GPIO_InitStructure;
+    if (mode==1)                        //输出模式
+	{
+        GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP; 
+    }
+    else
+    {
+         GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_IPU; 
+    }
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_0;  
+    GPIO_Init(GPIOB,&GPIO_InitStructure);
+}
+
+     
+
+void IIC_SDA_HIGH(void)
+{
+    IIC_SDA_Chg_out(); 
+    IIC_SDA_3V3(1);
+       
+}
+void IIC_SDA_LOW(void)
+{
+    IIC_SDA_Chg_out();  
+    IIC_SDA_3V3(0);
+     
+}
+void IIC_SCL_HIGH(void)
+{
+    IIC_SCL_3V3(1);
+}
+void IIC_SCL_LOW(void)
+{
+    IIC_SCL_3V3(0);
+}
+
+int GPIO_IIC_init(void)
+{
+    GPIO_InitTypeDef GPIO_InitStructure;
+    //打开相应GPIO口的时钟
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB |RCC_APB2Periph_GPIOC,ENABLE);
+
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_0;  
+    GPIO_Init(GPIOB,&GPIO_InitStructure);
+
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP; 
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_5;  
+    GPIO_Init(GPIOC,&GPIO_InitStructure);
+    //=========================================================
+		//GPIO_SetBits(GPIOB,GPIO_Pin_10|GPIO_Pin_11);
+	  //GPIO_ResetBits(GPIOB,GPIO_Pin_10|GPIO_Pin_11);
+    return 1;
+}
+
+void IIC_init(void)
+{
+    	GPIO_IIC_init(); 
+	IIC_SCL_HIGH(); 
+	IIC_SDA_HIGH();
+
+		//IIC_SDA_Chg_in();
+}
+
+
+void IIC_Start(void)
+{ 
+                                /*发送起始条件的数据信号*/
+    IIC_SDA_Chg_out();
+    IIC_SCL_HIGH();
+    IIC_Delayus(10);
+    IIC_SDA_HIGH();
+    IIC_Delayus(30);            //5/*起始条件建立时间大于4.7us,延时*/
+    
+                                /*发送起始信号*/
+    IIC_SDA_LOW();
+    IIC_Delayus(30);            //5/* 起始条件锁定时间大于4μs*/
+    
+                                /*钳住I2C总线，准备发送或接收数据 */
+    IIC_SCL_LOW();
+  //  IIC_Delayus(30);            //5//delay10us();
+  //  IIC_SDA_Chg_in();           //输入
+}
+
+
+void IIC_Stop(void)
+{
+  /*发送结束条件的数据信号*/
+    IIC_SDA_Chg_out();
+//    IIC_SCL_LOW();
+ //   IIC_Delayus(30);
+  
+   IIC_SDA_LOW();
+    IIC_Delayus(10);      /*发送结束条件的时钟信号*/
+
+    IIC_SCL_HIGH();
+     IIC_Delayus(10);      //5//delay25us();
+
+    IIC_SDA_HIGH();
+    IIC_Delayus(10);      //5//delay25us();
+    
+    /*发送I2C总线结束信号*/
+}
+
+
+
+void IIC_Free(void)
+{
+  /*发送结束条件的数据信号*/
+    IIC_SDA_Chg_out();
+
+    IIC_SDA_HIGH();
+    IIC_Delayus(30);      //5//delay25us();
+
+
+    IIC_SCL_HIGH();
+    IIC_Delayus(30);      //5//delay25us();
+    
+    /*发送I2C总线结束信号*/
+}
+
+/*  
+
+ * FunctionName: I2CSendACK  
+
+ * Purpose: 模拟I2C发送ACK响应  
+
+ * Parameters: 无  
+
+*/  
+void  IIC_SendAck(void)
+{
+    IIC_SDA_Chg_out();
+
+    IIC_SCL_LOW();
+    IIC_Delayus(10);      //5//delay25us();
+
+   IIC_SDA_LOW();
+    IIC_Delayus(10);      //5//delay25us();
+
+   IIC_SCL_HIGH();
+    IIC_Delayus(10);      //5//delay25us();
+
+
+   IIC_SCL_LOW();
+    IIC_Delayus(10);      //5//delay25us();
+
+}
+
+/*  
+
+ * FunctionName: I2CSendACK  
+
+ * Purpose: 模拟I2C无ACK响应  
+
+ * Parameters: 无  
+
+*/  
+void  IIC_SendNoAck(void)
+{
+    IIC_SDA_Chg_out();
+
+    IIC_SCL_LOW();
+    IIC_Delayus(10);      //5//delay25us();
+
+   IIC_SDA_HIGH();
+    IIC_Delayus(10);      //5//delay25us();
+
+
+     IIC_SCL_HIGH();
+    IIC_Delayus(10);      //5//delay25us();
+
+   IIC_SCL_LOW();
+    IIC_Delayus(10);      //5//delay25us();
+}
+
+/*检查I2C是否有ACK响应 */
+BOOL  I2C_CheckAck(void)
+{
+    BOOL tempAck;
+    IIC_SDA_Chg_out();  //dwd
+     IIC_SDA_HIGH();   //dwd
+    IIC_Delayus(10);      //5//delay25us();
+       IIC_SDA_Chg_in();
+    IIC_Delayus(10);      //5//delay25us(); 
+         IIC_SCL_HIGH();
+    IIC_Delayus(10);      //5//delay25us();
+   
+
+if(IIC_SDA_3V3_STATE)  {
+	tempAck = FALSE;
+} else {
+	tempAck = TRUE;
+}
+     IIC_SCL_LOW();
+    IIC_Delayus(10);      //5//delay25us();
+
+ return  tempAck;
+
+}
+void  IIC_SendByte(unsigned char data)
+{
+	 unsigned char BitCnt;
+
+    IIC_SDA_Chg_out();
+
+	 
+    for(BitCnt=8;BitCnt>=1;BitCnt--)  
+     {
+	if ((data>>(BitCnt-1))&0x01) {
+  			IIC_SDA_HIGH();
+		} else {
+ 			 IIC_SDA_LOW();
+		}
+	    IIC_Delayus(10);      //5//delay25us();
+
+	   IIC_SCL_HIGH();
+
+	  IIC_Delayus(10);      //5//delay25us();
+
+	   IIC_SCL_LOW();
+	  IIC_Delayus(10);      //5//delay25us();
+     }
+     
+}
+
+U08 I2CReceiveByte(U08 ack)
+{
+    U08 serialNum = 0;
+   U08 dataValue=0;  
+       IIC_SDA_Chg_in();	//输入
+
+    for(serialNum=0;serialNum<=7;serialNum++)  
+     {
+  	IIC_SCL_LOW();
+	  IIC_Delayus(10);      //5//delay25us();
+ 	  IIC_SCL_HIGH();
+	  dataValue <<=1;
+	  if (IIC_SDA_3V3_STATE) {
+		dataValue |=  0X01;
+	  }
+	  IIC_Delayus(10);      //5//delay25us();
+     }  
+	if (ack ==1)
+	{
+		IIC_SendNoAck();
+	} else {
+		IIC_SendAck();
+	}
+   return dataValue;
+
+}
+unsigned char  I2C_ReadByte(void)
+{
+	
+    U08 i;
+    U08 value;
+ 
+    /* 先读取最高位即bit7 */
+    value = 0;
+    for(i = 0 ; i < 8 ; i++)
+    {
+        value <<= 1;
+          IIC_SCL_HIGH();
+	  IIC_Delayus(10);      //5//delay25us();
+        if(IIC_SDA_3V3_STATE)
+        {
+            value++;
+        }
+         IIC_SCL_LOW();
+	  IIC_Delayus(10);      //5//delay25us();
+    }
+ 
+    return value;
+}
+
+
+
+void SlaveI2CFM1288Write(U16 tarAddress,U16 wrNumber)  
+
+{  
+ 	 BOOL rxdAck;
+
+ 	 IIC_Start();
+	
+	IIC_SendByte(0xc0);
+        rxdAck=I2C_CheckAck(); 
+	//  0xFC, 0xF3, 0x3B, 0x23, 0x0C, 0x01, 0x40, 
+	IIC_SendByte (0xfc);
+	I2C_CheckAck(); 
+	IIC_SendByte (0xf3);
+	I2C_CheckAck(); 	
+	IIC_SendByte (0x3b);
+	I2C_CheckAck(); 
+	IIC_SendByte (HI_BYTE(tarAddress));
+	I2C_CheckAck(); 
+	IIC_SendByte (LO_BYTE(tarAddress));
+	I2C_CheckAck(); 
+	IIC_SendByte (HI_BYTE(wrNumber));
+	I2C_CheckAck(); 
+	IIC_SendByte (LO_BYTE(wrNumber));
+	I2C_CheckAck();
+	
+	 IIC_Stop();
+
+}
+
+void NewSlaveI2CFM1288Write(unsigned char tarAddress,U16 wrNumber,unsigned char* wrPointer)  
+
+{  
+ 	 BOOL rxdAck;
+
+ 	 IIC_Start();
+	
+	IIC_SendByte(0xc0);
+        rxdAck=I2C_CheckAck(); 
+
+
+    for(;wrNumber !=0;wrNumber--,wrPointer ++) 
+    	{
+  		 IIC_SendByte(*wrPointer);   //按字节写入数据  
+
+   	     rxdAck=I2C_CheckAck(); 
+
+    	}
+	 IIC_Stop();
+
+}
+
+
+void SlaveI2CFM1288Read(unsigned char tarAddress,unsigned char *pData,U08  Lenght)  
+
+{  
+ 	 BOOL rxdAck;
+
+ 	 IIC_Start();
+	
+	IIC_SendByte(0xc0);
+        rxdAck=I2C_CheckAck(); 
+	 IIC_SendByte(0xfc);
+	rxdAck=I2C_CheckAck(); 
+ 	IIC_SendByte(0xf3);
+	rxdAck=I2C_CheckAck(); 
+	
+	IIC_SendByte(0x37);
+	rxdAck=I2C_CheckAck(); 
+	IIC_SendByte(0x38);
+	rxdAck=I2C_CheckAck(); 
+	IIC_SendByte(0x07);
+	rxdAck=I2C_CheckAck(); 
+
+	 IIC_Stop();
+	 	 IIC_Start();
+	IIC_SendByte(0xc1);
+     	rxdAck=I2C_CheckAck(); 
+// IIC_Delayus(200);      //5//delay25us();
+// IIC_SendByte(0x37);
+//	rxdAck=I2C_CheckAck(); 
+ 
+//	if (!I2C_CheckAck()) {
+	//	IIC_Stop();
+	//	return;
+	//}
+	
+	*pData = I2CReceiveByte(0);
+	pData ++;
+	IIC_SendAck(); 
+	*pData = I2CReceiveByte(0);
+	IIC_SendNoAck();
+	 IIC_Stop();
+}
+
+///*******************************************************************
+//                 用户接口函数                                   
+//*******************************************************************/
+///*******************************************************************
+//                 向无子地址器件发送字节数据函数               
+//功能:     从启动总线到发送地址，数据，结束总线的全过程,从器件地址sla.
+//          如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 ISendByte_NoSub(unsigned char sla,unsigned char c)
+//{
+//	unsigned char i;
+//	for(i=0;i<5;i++)
+//	{
+//		Start_I2c();               /*启动总线*/
+//	   	SendByte(sla);             /*发送器件地址*/
+//	   	if(IIC_ack==0)
+//	   	{
+//	   		Stop_I2c();                /*结束总线*/ 
+//	   		continue;
+//	   	}
+//	   	SendByte(c);               /*发送数据*/
+//	   	if(IIC_ack==0)
+//	   	{
+//	   		Stop_I2c();                /*结束总线*/ 
+//	   		continue;
+//	   	}
+//	   	//if(IIC_ack==0)return(0);
+//	   	Stop_I2c();                /*结束总线*/ 
+//	   	break;
+//	}
+//#ifdef FUNC_CAN_DIAG_EN
+//	if(i>=5)
+//	{
+//		canDTC[0]=1;
+//		return (0);
+//	}
+//	canDTC[0]=0;
+//#endif
+//	return(1);
+//}
+///*******************************************************************
+//                  向有子地址器件发送字节数据函数               
+//功能:     从启动总线到发送地址，子地址,数据，结束总线的全过程,从器件
+//          地址sla，子地址suba，发送内容是s指向的内容，发送no个字节。
+//          如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 ISendByte(unsigned char sla,unsigned char suba,unsigned char c)
+//{
+//   //PTED_PTED4=~PTED_PTED4;
+//    //PTED_PTED5=~PTED_PTED5;
+//   Start_I2c();               /*启动总线*/
+//   SendByte(sla);             /*发送器件地址*/
+////   if(IIC_ack==0)return(0);
+//   SendByte(suba);            /*发送器件子地址*/
+////   if(IIC_ack==0)return(0);
+//   SendByte(c);               /*发送数据*/
+//   if(IIC_ack==0)return(0);
+//   Stop_I2c();                /*结束总线*/ 
+//   return(1);
+//}
+
+// 
+
+
+///*******************************************************************
+//                    向有子地址器件发送多字节数据函数               
+//功能:     从启动总线到发送地址，子地址,数据，结束总线的全过程,从器件
+//          地址sla，子地址suba，发送内容是s指向的内容，发送no个字节。
+//          如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 ISendStr(unsigned char sla,unsigned char suba,unsigned char *s,unsigned char no)
+//{
+//   unsigned char i;
+
+//   Start_I2c();               /*启动总线*/
+//   SendByte(sla);             /*发送器件地址*/
+//   //if(IIC_ack==0)return(0);
+//   SendByte(suba);            /*发送器件子地址*/
+//   //if(IIC_ack==0)return(0);
+
+//   for(i=0;i<no;i++)
+//   {   
+//     SendByte(*s);            /*发送数据*/
+//     //if(IIC_ack==0)return(0);
+//     s++;
+//   } 
+//   Stop_I2c();                /*结束总线*/ 
+//   return(1);
+//}
+
+
+///*******************************************************************
+//                    向无子地址器件发送多字节数据函数               
+//功能:     从启动总线到发送地址，子地址,数据，结束总线的全过程,从器件
+//          地址sla，发送内容是s指向的内容，发送no个字节。
+//          如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 ISendStr_NoSub(unsigned char sla,unsigned char *s,unsigned char no)
+//{
+//   unsigned char i;
+
+//   Start_I2c();               /*启动总线*/
+//   SendByte(sla);             /*发送器件地址*/
+//   //if(IIC_ack==0)return(0);
+
+//   for(i=0;i<no;i++)
+//   {   
+//     SendByte(*s);            /*发送数据*/
+//     //if(IIC_ack==0)return(0);
+//     s++;
+//   } 
+//   Stop_I2c();                /*结束总线*/ 
+//   return(1);
+//}
+
+// 
+
+// 
+
+///*******************************************************************
+//                    向无子地址器件读字节数据函数               
+//功能:     从启动总线到发送地址，读数据，结束总线的全过程,从器件地
+//          址sla，返回值在c.
+//           如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 IRcvByte_NoSub(unsigned char sla,unsigned char *c)
+//{
+//   Start_I2c();                /*启动总线*/
+//   SendByte(sla);            /*发送器件地址*/
+//   //if(IIC_ack==0)return(0);
+//   *c=RcvByte();               /*读取数据*/
+//   IIC_ack_I2c(1);                 /*发送非就答位*/
+//   Stop_I2c();                 /*结束总线*/ 
+//   return(1);
+//}
+
+///*******************************************************************
+//                    向有子地址器件读字节数据函数               
+//功能:     从启动总线到发送地址，读数据，结束总线的全过程,从器件地
+//          址sla，返回值在c.
+//           如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 IRcvByte(unsigned char sla,unsigned char suba,unsigned char *c)
+//{
+//   Start_I2c();                /*启动总线*/
+//   SendByte(sla);            /*发送器件地址*/
+////   if(IIC_ack==0)return(0);
+//   SendByte(suba);               /*发送器件子地址*/
+////   if(IIC_ack==0)return(0);
+//   *c=RcvByte();               /*读取数据*/
+//   IIC_ack_I2c(1);                 /*发送非就答位*/
+//   Stop_I2c();                 /*结束总线*/ 
+//   return(1);
+//}
+// 
+
+///*******************************************************************
+//                    向有子地址器件读取多字节数据函数               
+//功能:     从启动总线到发送地址，子地址,读数据，结束总线的全过程,从器件
+//          地址sla，子地址suba，读出的内容放入s指向的存储区，读no个字节。
+//           如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 IRcvStr(unsigned char sla,unsigned char suba,unsigned char *s,unsigned char no)
+//{
+//   unsigned char i;
+
+//   Start_I2c();                  /*启动总线*/
+//   SendByte(sla);                /*发送器件地址*/
+//   if(IIC_ack==0)return(0);
+//   SendByte(suba);               /*发送器件子地址*/
+//   if(IIC_ack==0)return(0);
+
+//   Start_I2c();    /*重新启动总线*/
+//   SendByte(sla);
+//   if(IIC_ack==0)return(0);
+//   for(i=0;i<no-1;i++)
+//   {   
+//     *s=RcvByte();               /*发送数据*/
+//      IIC_ack_I2c(0);                /*发送就答位*/  
+//     s++;
+//   } 
+//   *s=RcvByte();
+//   IIC_ack_I2c(1);                   /*发送非应位*/
+//   Stop_I2c();                   /*结束总线*/ 
+//   return(1);
+//}
+
+
+///*******************************************************************
+//                    向无子地址器件读取多字节数据函数               
+//功能:     从启动总线到发送地址,读数据,结束总线的全过程.
+//          从器件地址sla，读出的内容放入s指向的存储区，
+//          读no个字节。如果返回1表示操作成功，否则操作有误。
+//注意：    使用前必须已结束总线。
+//********************************************************************/
+//u8 IRcvStr_NoSub(unsigned char sla,unsigned char *s,unsigned char no)
+//{
+//   unsigned char i;
+
+//   Start_I2c();
+//   SendByte(sla);
+//   //if(IIC_ack==0)return(0);
+
+//   for(i=0;i<no-1;i++)
+//   {   
+//      *s=RcvByte();               /*发送数据*/
+//      IIC_ack_I2c(0);                 /*发送就答位*/  
+//      s++;
+//   } 
+//   *s=RcvByte();
+//   IIC_ack_I2c(1);                    /*发送非应位*/
+//   Stop_I2c();                    /*结束总线*/ 
+//   return(1);
+//}
+

BSP/GPIO_IIC_Drv.h

@@ -0,0 +1,23 @@
+#ifndef __GPIO_IIC_DRV_H
+#define __GPIO_IIC_DRV_H
+    #include 		"stm32f10x.h" 
+	#include "app_def.h"
+    
+    extern  unsigned char IIC_ack;           /*Ó¦´ð±ê־λ*/
+    extern  void IIC_Start(void);
+    extern  void IIC_Stop(void);
+    extern  void IIC_SendByte(unsigned char data);
+    extern  unsigned char  IIC_RcvByte(void);
+    extern  void IIC_Ack(unsigned char  Action);
+    extern  void IIC_init(void);   
+    extern  void SDA_Port_Config(unsigned char mode);
+    extern void SlaveI2CFM1288Write(U16 tarAddress,U16 wrNumber); 
+
+    extern void NewSlaveI2CFM1288Write(unsigned char tarAddress, U16  wrNumber,unsigned char* wrPointer) ;
+
+extern void  IIC_SendByte(unsigned char data);
+extern BOOL  I2C_CheckAck(void);
+extern unsigned char  I2C_ReadByte(void);
+extern U08 I2CReceiveByte(U08 ack);
+#endif    
+

BSP/GPIO_KEY.c

@@ -0,0 +1,64 @@
+#include        "GPIO_KEY.h"
+#include "app_def.h"
+#include "bsp.h"
+
+signed char KEY[1]={-1};			        //-1表示未按下，0表示按住，1表示短按，2表示长按
+
+static U08 s_u8keyCnt =0;
+extern unsigned int LocalTime;
+static VU16 s_vu16KeyTaskTmr  = {0};
+
+int GPIO_KEY_init(void)
+{
+	
+    GPIO_InitTypeDef GPIO_InitStructure;
+    //打开相应GPIO口的时钟
+    KEY0_RccOpen();
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_IPU;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = KEY0_LINE;  
+    GPIO_Init(KEY0_Port,&GPIO_InitStructure);
+	
+	  GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_IPU;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_7;  
+    GPIO_Init(GPIOC,&GPIO_InitStructure);
+    
+    KEY[0]=-1;
+ 
+    return 1;
+}
+void KeyTaskTmr(void)
+{
+	if(s_vu16KeyTaskTmr!=0xffff)  s_vu16KeyTaskTmr++;
+	
+}
+
+void GPIO_KEY_Tick(void)
+{
+	BOOL  port = FALSE;
+
+
+    port = GPIO_ReadInputDataBit(KEY0_Port,KEY0_LINE);
+
+   if (port) {  //no press
+		s_u8keyCnt ++;
+		if (s_u8keyCnt > 200) {
+			s_u8keyCnt =0;
+  			KEY[0]= -1;
+			s_vu16KeyTaskTmr =0;
+		}
+   	} else {	
+		s_u8keyCnt =0;
+		if (s_vu16KeyTaskTmr > OS_TIMER_100MS) {
+			if ( KEY[0] != 0x01) {
+					SYS_Reset();
+					Mcu_Reset(1);
+				}
+			  KEY[0]= 1 ;
+			  
+		} 
+
+	}
+ 
+}

BSP/GPIO_KEY.h

@@ -0,0 +1,17 @@
+#ifndef __GPIO_KEY_H
+#define __GPIO_KEY_H
+
+    #include 		"stm32f10x.h"
+
+	extern  signed char KEY[1];			    //0表示未按下，1表示短按，2表示长按
+    extern  int GPIO_KEY_init(void);
+    extern  void GPIO_KEY_Tick(void);
+    extern  void KeyTaskTmr(void);
+    
+	//按键0的端口号
+	#define KEY0_Port       			GPIOC				   										
+	#define KEY0_LINE       			GPIO_Pin_6		   									
+	#define KEY0_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)    	//时钟
+	#define GpioLineCheckInputVal()   			GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_7)
+
+#endif

BSP/GPIO_LED.c

@@ -0,0 +1,80 @@
+#include 		"GPIO_LED.h"
+
+unsigned char LED[2];
+
+extern unsigned int LocalTime;
+
+int GPIO_LED_init(void)
+{
+
+    GPIO_InitTypeDef GPIO_InitStructure;
+    //打开相应GPIO口的时钟
+    LED0_RccOpen();
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = LED0_LINE;  
+    GPIO_Init(LED0_Port,&GPIO_InitStructure);
+    GPIO_ResetBits(LED0_Port,LED0_LINE);
+    
+    //打开相应GPIO口的时钟
+    LED1_RccOpen();
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = LED1_LINE;  
+    GPIO_Init(LED1_Port,&GPIO_InitStructure);
+    GPIO_ResetBits(LED1_Port,LED1_LINE);
+
+
+			GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_7;  
+    GPIO_Init(GPIOB,&GPIO_InitStructure);
+   
+    LED[0]=0;
+    LED[1]=0;
+    return 1;
+}
+
+
+void GPIO_LED_Tick(void)
+{
+    static unsigned int LedTime=0;
+    static unsigned char LedFlag=0;
+    //===============================
+    if(LocalTime>LedTime)
+    {
+        LedTime=LocalTime+500;
+        if(LedFlag==0)
+            LedFlag=1;
+        else
+            LedFlag=0;
+    }
+    //===============================
+    switch(LED[1])
+    {
+       case 1:
+            GPIO_SetBits(LED0_Port,LED0_LINE);
+            break;
+       case 0:
+            GPIO_ResetBits(LED0_Port,LED0_LINE);
+            break;
+       case 2:
+            GPIO_WriteBit(LED0_Port,LED0_LINE,(BitAction)LedFlag);
+            break;
+    }
+    //=============================== 
+    switch(LED[0])
+    {
+       case 1:
+            GPIO_SetBits(LED1_Port,LED1_LINE);
+            break;
+       case 0:
+            GPIO_ResetBits(LED1_Port,LED1_LINE);
+            break;
+       case 2:
+            GPIO_WriteBit(LED1_Port,LED1_LINE,(BitAction)LedFlag);
+            break;
+    }
+    //===============================     
+}
+

BSP/GPIO_LED.h

@@ -0,0 +1,27 @@
+#ifndef __GPIO_LED_H__
+#define __GPIO_LED_H__
+    #include 		"stm32f10x.h"
+
+
+
+	//LED0的端口号
+	#define LED0_Port       			GPIOB				   																				//LED线在哪个端口
+	#define LED0_LINE       			GPIO_Pin_15			   																				//哪根线
+	#define LED0_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)    	//时钟
+	
+    //LED1的端口号
+	#define LED1_Port       			GPIOB				   																				//LED线在哪个端口
+	#define LED1_LINE       			GPIO_Pin_14			   																				//哪根线
+	#define LED1_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)  
+ 
+#define GpioSwLineOutput_H   			GPIO_SetBits(GPIOB,GPIO_Pin_7)
+#define GpioSwLineOutput_L   			GPIO_ResetBits(GPIOB,GPIO_Pin_7)    
+    
+    extern unsigned char LED[2];
+    
+    extern int GPIO_LED_init(void);
+    
+    extern void GPIO_LED_Tick(void);
+
+
+#endif 

BSP/GPIO_NET.c

@@ -0,0 +1,5 @@
+#include 		"GPIO_NET.h"
+
+unsigned char RTL8152B=1;
+
+extern unsigned int LocalTime;

BSP/GPIO_NET.h

@@ -0,0 +1,17 @@
+#ifndef __GPIO_NET_H__
+#define __GPIO_NET_H__
+    #include 		"stm32f10x.h"
+
+
+
+	//NET的端口号
+	#define NET_Port       			GPIOA				   																			//LED线在哪个端口
+	#define NET_LINE       			GPIO_Pin_15			   																			//哪根线
+	#define NET_RccOpen()   		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE)                                             //时钟
+    
+   extern unsigned char RTL8152B;
+   extern int GPIO_NET_init(void);
+   extern void GPIO_NET_Tick(void);
+    
+#endif
+

BSP/GPIO_SYS.c

@@ -0,0 +1,147 @@
+#include        "GPIO_SYS.h"
+#include "app_def.h"
+
+extern unsigned int LocalTime;
+
+int GPIO_SYS_init(void)
+{
+    GPIO_InitTypeDef GPIO_InitStructure;
+
+    //ANDROID_POWER_RccOpen();
+//    ANDROID_RESET_RccOpen();
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC |RCC_APB2Periph_GPIOD,ENABLE);    	//时钟    
+    //ANDROID_V0L_RccOpen();
+    //================================================
+//    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+//    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+//    GPIO_InitStructure.GPIO_Pin   = ANDROID_POWER_LINE;  
+//    GPIO_Init(ANDROID_POWER_Port,&GPIO_InitStructure);
+//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE);
+    //================================================
+     GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+     GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+     GPIO_InitStructure.GPIO_Pin   = ANDROID_RESET_LINE;  
+     GPIO_Init(ANDROID_RESET_Port,&GPIO_InitStructure);
+     GPIO_SetBits(ANDROID_RESET_Port,ANDROID_RESET_LINE);   
+    SYS_Reset();
+    //================================================
+//    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+//    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+//    GPIO_InitStructure.GPIO_Pin   = ANDROID_V0L_LINE;  
+//    GPIO_Init(ANDROID_V0L_Port,&GPIO_InitStructure);
+//    GPIO_SetBits(ANDROID_V0L_Port,ANDROID_V0L_LINE);    
+//    //================================================
+    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_1;  
+    GPIO_Init(GPIOC,&GPIO_InitStructure);
+
+//	Mcu_Reset(RESET) ;
+    return 1;
+}
+
+int SYS_Reset(void)     //复位高电平有效
+{
+    unsigned int i=0;
+   
+    GPIO_ResetBits(ANDROID_RESET_Port,ANDROID_RESET_LINE);
+    for(i=0;i<500000;i++)
+    {
+        WDG_Feed();
+    }
+    GPIO_SetBits(ANDROID_RESET_Port,ANDROID_RESET_LINE);
+    return 1;
+}
+
+void Mcu_Reset(U08 flag) 
+{
+	if (flag) {
+		 GPIO_SetBits(GPIOC,GPIO_Pin_1);	
+	} else {
+		 GPIO_ResetBits(GPIOC,GPIO_Pin_1);
+	}
+
+
+
+}
+//int SYS_SetUpdate(void)
+//{
+//    unsigned int i=0;
+//    unsigned int TempTimes=0;
+//    //===========================================
+//    GPIO_ResetBits(ANDROID_V0L_Port,ANDROID_V0L_LINE);                  //按下“音量+”键
+//    
+//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE);              //长按“Power”键
+//    TempTimes=LocalTime+12000;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }
+//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE);                //松开“Power”键
+//    //===========================================
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }  
+//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    } 
+//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }    
+//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================    
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }    
+//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================    
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }    
+//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================    
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }    
+//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================    
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    } 
+//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================    
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }  
+//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
+//    //=============================    
+//    TempTimes=LocalTime+500;
+//    while(TempTimes>LocalTime)
+//    {
+//         WDG_Feed();
+//    }  
+//    
+//    GPIO_SetBits(ANDROID_V0L_Port,ANDROID_V0L_LINE);  
+
+//    return 1;
+//}

BSP/GPIO_SYS.h

@@ -0,0 +1,24 @@
+#ifndef __GPIO_SYS_H
+#define __GPIO_SYS_H
+
+    #include 		"stm32f10x.h"
+    #include        "WDG.h"
+	#include "app_def.h"
+    
+    extern  int GPIO_SYS_init(void);
+    extern  int SYS_Reset(void);
+    extern void Mcu_Reset(U08 flag) ;
+
+//	#define ANDROID_POWER_Port       	        GPIOB				   																						//LED线在哪个端口
+//	#define ANDROID_POWER_LINE       	        GPIO_Pin_3			   									//哪根线
+//	#define ANDROID_POWER_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)    	//时钟
+    
+	#define ANDROID_RESET_Port       	        GPIOD				   																						//LED线在哪个端口
+	#define ANDROID_RESET_LINE       	        GPIO_Pin_2			   									//哪根线
+	#define ANDROID_RESET_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD,ENABLE)    	//时钟    
+
+//	#define ANDROID_V0L_Port       	            GPIOB				   																						//LED线在哪个端口
+//	#define ANDROID_V0L_LINE       	            GPIO_Pin_4			   									//哪根线
+//	#define ANDROID_V0L_RccOpen()   			RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)    	//时钟 
+    
+#endif

BSP/IIC_FM1288.c

@@ -0,0 +1,631 @@
+#include    "IIC_FM1288.h"
+#include    "GPIO_KEY.h"
+#include "app_def.h"
+#include "BSP.h"
+
+
+#define DEVICE_ID     0xC0
+
+#define FM1288REGLEN     114
+
+U08 HANDLE =0;
+U08 gtI2cstate =0;
+
+static VU16 s_vu16I2cFM1288TaskTmr  = {0};
+
+
+#if 0
+static  unsigned char HandFreeData[]={ 
+
+0xFC, 0xF3, 0x3B,0x23,0x0c,0x03,0x60,            
+    
+};
+�*��
+
+
+/*  Speaker volume.0x0: minimum,0x7fff:
+maximum, 0x100: maintain the same
+volume as input  */
+static const U08 I2CSpkData[]= { 
+    0x07,0xFC, 0xF3, 0x3B, 0x23, 0x0d, 0x01, 0x80,
+};
+#endif
+
+
+#if 0
+static   unsigned char HandFreeAllData[FM1288REGLEN][9]={  
+    // {0x01,0xC0},
+     {0x05, 0xFC, 0xF3, 0x68, 0x64, 0x00},
+     {0x08, 0xFC, 0xF3, 0x0D, 0x3F, 0x80, 0x90, 0x94, 0x3E},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x81, 0x93, 0x83, 0xDE},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x82, 0x19, 0x2A, 0xBF},
+     {0x08, 0xFC, 0xF3, 0x0D, 0x3F, 0x83, 0x40, 0x05, 0x08},
+     {0x08, 0xFC, 0xF3, 0x0D, 0x3F, 0x84, 0x19, 0x3E, 0x7F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x85, 0x80, 0x95, 0x2A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x86, 0x2A, 0x7A, 0xAA},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x87, 0x19, 0x28, 0x4F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x88, 0x80, 0x94, 0x3A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x89, 0x82, 0x32, 0xD1},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x8A, 0x26, 0x79, 0x0F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x8B, 0x19, 0x2A, 0x80},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x8C, 0x80, 0x95, 0xBA},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x8D, 0x68, 0x00, 0xA1},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x8E, 0x94, 0x96, 0xD0},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x8F, 0x90, 0x95, 0xBE},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x90, 0x19, 0x2A, 0xBF},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x91, 0x40, 0xFA, 0x0A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x92, 0x41, 0x77, 0x0C},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x93, 0x41, 0xF4, 0x0B},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x94, 0x42, 0xB1, 0x1F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x95, 0x42, 0xEE, 0x0E},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x96, 0x82, 0x30, 0x11},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x97, 0x27, 0x91, 0x1F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x98, 0x22, 0x7C, 0x01},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x99, 0x27, 0x91, 0x5F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x9A, 0x22, 0x7B, 0x01},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x9B, 0x27, 0x91, 0x9F},
+     {0x08, 0xFC, 0xF3, 0x0D, 0x3F, 0x9C, 0x22, 0x7F, 0x01},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x9D, 0x27, 0x91, 0xDF},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x9E, 0x22, 0x7E, 0x01},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0x9F, 0x18, 0x34, 0xBF},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA0, 0x22, 0x7F, 0x9F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA1, 0x19, 0xB0, 0x5F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA2, 0x41, 0x00, 0x0A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA3, 0x90, 0x96, 0xDA},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA4, 0x82, 0x2C, 0x4A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA5, 0x23, 0xA2, 0x5F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA6, 0x92, 0x2C, 0x4A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA7, 0x82, 0x32, 0x5A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA8, 0x19, 0x76, 0x4F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xA9, 0x82, 0x2F, 0x2A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xAA, 0x40, 0x03, 0x85},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xAB, 0x26, 0xEA, 0x0F},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xAC, 0x22, 0x08, 0x02},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xAD, 0x92, 0x2F, 0x2A},
+     {0x08,0xFC, 0xF3, 0x0D, 0x3F, 0xAE, 0x18, 0x28, 0x3F},
+     {0x05,0xFC, 0xF3, 0x68, 0x64, 0x00},
+     {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA0, 0x92, 0xAA},
+     {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB0, 0x3F, 0x80},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA1, 0x93, 0xE6},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB1, 0x3F, 0x83},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA2, 0x92, 0x82},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB2, 0x3F, 0x85},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA3, 0x92, 0xA7},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB3, 0x3F, 0x88},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA4, 0x83, 0x49},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB4, 0x3F, 0x91},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA5, 0x9B, 0x04},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB5, 0x3F, 0xA0},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA6, 0x97, 0x63},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB6, 0x3F, 0xA2},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xA7, 0x82, 0x82},
+    {0x07,0xFC, 0xF3, 0x3B, 0x3F, 0xB7, 0x3F, 0xA9},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x01, 0x00, 0x02},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xBF, 0x01, 0x80},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x03, 0x19, 0xB9},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xE5, 0x00, 0x2F},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x05, 0x00, 0x01},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xC8, 0x00, 0x29},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x48, 0x20, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x49, 0x20, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xE7, 0x14, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xE8, 0x20, 0x00},
+//    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x0C, 0x04, 0x00}, //75
+      {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x0C, 0x02, 0x2c}, //dwdtet
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xE9, 0x30, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x0D, 0x03, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xEA, 0x78, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xEB, 0x00, 0x60},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x6E, 0x08, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x6F, 0x08, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x70, 0x04, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x32, 0x00, 0x80},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x33, 0x00, 0x10},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xF5, 0x80, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xB3, 0x00, 0x0A},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xFA, 0x00, 0x3D},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xB4, 0x00, 0x04},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x2F, 0x01, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x39, 0x00, 0x20},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xF9, 0x00, 0x4F},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xBE, 0x02, 0x80},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xB7, 0x00, 0x03},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xEC, 0x01, 0x00},
+    {0x07, 0xFC, 0xF3, 0x3B, 0x22, 0xF2,0x00, 0x30},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xF8, 0x80, 0x02},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x04, 0x03, 0xCF},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x10, 0x12, 0x0C},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x07, 0xF8, 0xF8},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xD0, 0x06, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xCF, 0x60, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xD5, 0x60, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x80, 0x08, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x81, 0x01, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xBC, 0x00, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xB5, 0x00, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0xD3, 0x20, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xC4, 0x06, 0x22},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x82, 0x03, 0x40},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x83, 0x05, 0xC0},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x28, 0x7F, 0xFF},
+    {0x07,0xFC, 0xF3, 0x3B, 0x23, 0x2A, 0x00, 0x00},
+    {0x07,0xFC, 0xF3, 0x3B, 0x22, 0xFB, 0x00, 0x00}
+
+};
+#endif
+/*FM1288 参数部分修正 */
+
+static   unsigned char HandFreeNewAllData[843]={  //841
+    0xFC, 0xF3, 0x68, 0x64, 0x00,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x80, 0x90, 0x94, 0x3E,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x81, 0x93, 0x83, 0xDE,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x82, 0x19, 0x2A, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x83, 0x40, 0x05, 0x08,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x84, 0x19, 0x3E, 0x7F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x85, 0x80, 0x95, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x86, 0x2A, 0x7A, 0xAA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x87, 0x19, 0x28, 0x4F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x88, 0x80, 0x94, 0x3A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x89, 0x82, 0x32, 0xD1,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8A, 0x26, 0x79, 0x0F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8B, 0x19, 0x2A, 0x80,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8C, 0x80, 0x95, 0xBA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8D, 0x68, 0x00, 0xA1,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8E, 0x94, 0x96, 0xD0,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8F, 0x90, 0x95, 0xBE,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x90, 0x19, 0x2A, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x91, 0x40, 0xFA, 0x0A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x92, 0x41, 0x77, 0x0C,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x93, 0x41, 0xF4, 0x0B,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x94, 0x42, 0xB1, 0x1F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x95, 0x42, 0xEE, 0x0E,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x96, 0x82, 0x30, 0x11,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x97, 0x27, 0x91, 0x1F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x98, 0x22, 0x7C, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x99, 0x27, 0x91, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9A, 0x22, 0x7B, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9B, 0x27, 0x91, 0x9F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9C, 0x22, 0x7F, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9D, 0x27, 0x91, 0xDF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9E, 0x22, 0x7E, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9F, 0x18, 0x34, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA0, 0x22, 0x7F, 0x9F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA1, 0x19, 0xB0, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA2, 0x41, 0x00, 0x0A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA3, 0x90, 0x96, 0xDA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA4, 0x82, 0x2C, 0x4A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA5, 0x23, 0xA2, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA6, 0x92, 0x2C, 0x4A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA7, 0x82, 0x32, 0x5A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA8, 0x19, 0x76, 0x4F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA9, 0x82, 0x2F, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAA, 0x40, 0x03, 0x85,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAB, 0x26, 0xEA, 0x0F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAC, 0x22, 0x08, 0x02,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAD, 0x92, 0x2F, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAE, 0x18, 0x28, 0x3F,
+    0xFC, 0xF3, 0x68, 0x64, 0x00,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA0, 0x92, 0xAA,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB0, 0x3F, 0x80,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA1, 0x93, 0xE6,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB1, 0x3F, 0x83,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA2, 0x92, 0x82,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB2, 0x3F, 0x85,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA3, 0x92, 0xA7,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB3, 0x3F, 0x88,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA4, 0x83, 0x49,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB4, 0x3F, 0x91,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA5, 0x9B, 0x04,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB5, 0x3F, 0xA0,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA6, 0x97, 0x63,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB6, 0x3F, 0xA2,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA7, 0x82, 0x82,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB7, 0x3F, 0xA9,
+    0xFC, 0xF3, 0x3B, 0x23, 0x01, 0x00, 0x02,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBF, 0x01, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0x03, 0x19, 0xB9,
+    0xFC, 0xF3, 0x3B, 0x22, 0xE5, 0x00, 0x2F,
+    0xFC, 0xF3, 0x3B, 0x23, 0x05, 0x00, 0x01,
+    0xFC, 0xF3, 0x3B, 0x22, 0xC8, 0x00, 0x29,
+    0xFC, 0xF3, 0x3B, 0x23, 0x48, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x49, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE7, 0x14, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE8, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x0C, 0x04, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE9, 0x30, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x0D, 0x03, 0x00, //0X03 00 190621
+    0xFC, 0xF3, 0x3B, 0x23, 0xEA, 0x78, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEB, 0x00, 0x60,
+    0xFC, 0xF3, 0x3B, 0x23, 0x6E, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x6F, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x70, 0x04, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x32, 0x00, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0x33, 0x00, 0x10,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF5, 0x80, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB3, 0x00, 0x0A,
+    0xFC, 0xF3, 0x3B, 0x22, 0xFA, 0x00, 0x3D,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB4, 0x00, 0x04,
+    0xFC, 0xF3, 0x3B, 0x23, 0x2F, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x39, 0x00, 0x20,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF9, 0x00, 0x4F,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBE, 0x02, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB7, 0x00, 0x03,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEC, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF2, 0x00, 0x30,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF8, 0x80, 0x02,
+    0xFC, 0xF3, 0x3B, 0x23, 0x04, 0x03, 0xCF,
+    0xFC, 0xF3, 0x3B, 0x23, 0x10, 0x12, 0x0C,
+    0xFC, 0xF3, 0x3B, 0x23, 0x07, 0xF8, 0xF8,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD0, 0x06, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xCF, 0x60, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD5, 0x60, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x80, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x81, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBC, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB5, 0x48, 0x00, //0x48 00
+    0xFC, 0xF3, 0x3B, 0x23, 0xD3, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xC4, 0x06, 0x22,
+    0xFC, 0xF3, 0x3B, 0x23, 0x82, 0x03, 0x40,
+    //  0xFC, 0xF3, 0x3B, 0x23, 0x83, 0x05, 0xC0,  
+    0xFC, 0xF3, 0x3B, 0x23, 0x83, 0x05, 0xC0,  
+    0xFC, 0xF3, 0x3B, 0x23, 0x28, 0x7F, 0xFF,
+    0xFC, 0xF3, 0x3B, 0x23, 0x2A, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xFB, 0x00, 0x00
+};
+
+
+
+static   unsigned char HandFreeNewAll0621Data[835]={  //835                       
+    0xFC, 0xF3, 0x68, 0x64, 0x00,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x80, 0x90, 0x94, 0x3E,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x81, 0x93, 0x83, 0xDE,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x82, 0x19, 0x2A, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x83, 0x40, 0x05, 0x08,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x84, 0x19, 0x3E, 0x7F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x85, 0x80, 0x95, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x86, 0x2A, 0x7A, 0xAA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x87, 0x19, 0x28, 0x4F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x88, 0x80, 0x94, 0x3A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x89, 0x82, 0x32, 0xD1,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8A, 0x26, 0x79, 0x0F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8B, 0x19, 0x2A, 0x80,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8C, 0x80, 0x95, 0xBA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8D, 0x68, 0x00, 0xA1,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8E, 0x94, 0x96, 0xD0,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8F, 0x90, 0x95, 0xBE,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x90, 0x19, 0x2A, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x91, 0x40, 0xFA, 0x0A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x92, 0x41, 0x77, 0x0C,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x93, 0x41, 0xF4, 0x0B,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x94, 0x42, 0xB1, 0x1F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x95, 0x42, 0xEE, 0x0E,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x96, 0x82, 0x30, 0x11,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x97, 0x27, 0x91, 0x1F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x98, 0x22, 0x7C, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x99, 0x27, 0x91, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9A, 0x22, 0x7B, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9B, 0x27, 0x91, 0x9F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9C, 0x22, 0x7F, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9D, 0x27, 0x91, 0xDF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9E, 0x22, 0x7E, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9F, 0x18, 0x34, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA0, 0x22, 0x7F, 0x9F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA1, 0x19, 0xB0, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA2, 0x41, 0x00, 0x0A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA3, 0x90, 0x96, 0xDA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA4, 0x82, 0x2C, 0x4A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA5, 0x23, 0xA2, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA6, 0x92, 0x2C, 0x4A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA7, 0x82, 0x32, 0x5A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA8, 0x19, 0x76, 0x4F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA9, 0x82, 0x2F, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAA, 0x40, 0x03, 0x85,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAB, 0x26, 0xEA, 0x0F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAC, 0x22, 0x08, 0x02,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAD, 0x92, 0x2F, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAE, 0x18, 0x28, 0x3F,
+    0xFC, 0xF3, 0x68, 0x64, 0x00,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA0, 0x92, 0xAA,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB0, 0x3F, 0x80,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA1, 0x93, 0xE6,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB1, 0x3F, 0x83,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA2, 0x92, 0x82,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB2, 0x3F, 0x85,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA3, 0x92, 0xA7,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB3, 0x3F, 0x88,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA4, 0x83, 0x49,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB4, 0x3F, 0x91,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA5, 0x9B, 0x04,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB5, 0x3F, 0xA0,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA6, 0x97, 0x63,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB6, 0x3F, 0xA2,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA7, 0x82, 0x82,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB7, 0x3F, 0xA9,
+    0xFC, 0xF3, 0x3B, 0x23, 0x01, 0x00, 0x02,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBF, 0x01, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0x03, 0x19, 0xB9,
+    0xFC, 0xF3, 0x3B, 0x22, 0xE5, 0x00, 0x2F,
+    0xFC, 0xF3, 0x3B, 0x23, 0x05, 0x00, 0x01,
+    0xFC, 0xF3, 0x3B, 0x22, 0xC8, 0x00, 0x29,
+    0xFC, 0xF3, 0x3B, 0x23, 0x48, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x49, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE7, 0x14, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE8, 0x28, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x0C, 0x04, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE9, 0x30, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x0D, 0x06, 0x50,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEA, 0x78, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEB, 0x00, 0x60,
+    0xFC, 0xF3, 0x3B, 0x23, 0x6E, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x6F, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x70, 0x04, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x32, 0x00, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0x33, 0x00, 0x10,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF5, 0x80, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB3, 0x00, 0x0A,
+    0xFC, 0xF3, 0x3B, 0x22, 0xFA, 0x00, 0x3D,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB4, 0x00, 0x04,
+    0xFC, 0xF3, 0x3B, 0x23, 0x2F, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x39, 0x00, 0x20,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF9, 0x00, 0x4F,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBE, 0x02, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB7, 0x00, 0x03,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEC, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF2, 0x00, 0x30,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF8, 0x80, 0x02,
+    0xFC, 0xF3, 0x3B, 0x23, 0x04, 0x03, 0xCF,
+    0xFC, 0xF3, 0x3B, 0x23, 0x10, 0x12, 0x0C,
+    0xFC, 0xF3, 0x3B, 0x23, 0x07, 0xF8, 0xF8,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD0, 0x06, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xCF, 0x60, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD5, 0x60, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x80, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x81, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBC, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB5, 0x48, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD3, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xC4, 0x06, 0x22,
+    0xFC, 0xF3, 0x3B, 0x23, 0x82, 0x03, 0x40,
+    0xFC, 0xF3, 0x3B, 0x23, 0x28, 0x7F, 0xFF,
+    0xFC, 0xF3, 0x3B, 0x23, 0x2A, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xFB, 0x00, 0x00
+};
+
+/*190808 的FM1288参数 */
+//#if 0
+static  unsigned char HandFreeNewAll0808Data[835]={  //190808                      
+     0xFC, 0xF3, 0x68, 0x64, 0x00,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x80, 0x90, 0x94, 0x3E,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x81, 0x93, 0x83, 0xDE,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x82, 0x19, 0x2A, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x83, 0x40, 0x05, 0x08,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x84, 0x19, 0x3E, 0x7F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x85, 0x80, 0x95, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x86, 0x2A, 0x7A, 0xAA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x87, 0x19, 0x28, 0x4F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x88, 0x80, 0x94, 0x3A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x89, 0x82, 0x32, 0xD1,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8A, 0x26, 0x79, 0x0F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8B, 0x19, 0x2A, 0x80,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8C, 0x80, 0x95, 0xBA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8D, 0x68, 0x00, 0xA1,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8E, 0x94, 0x96, 0xD0,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x8F, 0x90, 0x95, 0xBE,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x90, 0x19, 0x2A, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x91, 0x40, 0xFA, 0x0A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x92, 0x41, 0x77, 0x0C,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x93, 0x41, 0xF4, 0x0B,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x94, 0x42, 0xB1, 0x1F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x95, 0x42, 0xEE, 0x0E,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x96, 0x82, 0x30, 0x11,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x97, 0x27, 0x91, 0x1F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x98, 0x22, 0x7C, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x99, 0x27, 0x91, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9A, 0x22, 0x7B, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9B, 0x27, 0x91, 0x9F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9C, 0x22, 0x7F, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9D, 0x27, 0x91, 0xDF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9E, 0x22, 0x7E, 0x01,
+    0xFC, 0xF3, 0x0D, 0x3F, 0x9F, 0x18, 0x34, 0xBF,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA0, 0x22, 0x7F, 0x9F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA1, 0x19, 0xB0, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA2, 0x41, 0x00, 0x0A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA3, 0x90, 0x96, 0xDA,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA4, 0x82, 0x2C, 0x4A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA5, 0x23, 0xA2, 0x5F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA6, 0x92, 0x2C, 0x4A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA7, 0x82, 0x32, 0x5A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA8, 0x19, 0x76, 0x4F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xA9, 0x82, 0x2F, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAA, 0x40, 0x03, 0x85,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAB, 0x26, 0xEA, 0x0F,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAC, 0x22, 0x08, 0x02,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAD, 0x92, 0x2F, 0x2A,
+    0xFC, 0xF3, 0x0D, 0x3F, 0xAE, 0x18, 0x28, 0x3F,
+    0xFC, 0xF3, 0x68, 0x64, 0x00,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA0, 0x92, 0xAA,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB0, 0x3F, 0x80,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA1, 0x93, 0xE6,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB1, 0x3F, 0x83,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA2, 0x92, 0x82,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB2, 0x3F, 0x85,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA3, 0x92, 0xA7,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB3, 0x3F, 0x88,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA4, 0x83, 0x49,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB4, 0x3F, 0x91,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA5, 0x9B, 0x04,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB5, 0x3F, 0xA0,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA6, 0x97, 0x63,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB6, 0x3F, 0xA2,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xA7, 0x82, 0x82,
+    0xFC, 0xF3, 0x3B, 0x3F, 0xB7, 0x3F, 0xA9,
+    0xFC, 0xF3, 0x3B, 0x23, 0x01, 0x00, 0x02,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBF, 0x01, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0x03, 0x19, 0xB9,
+    0xFC, 0xF3, 0x3B, 0x22, 0xE5, 0x00, 0x2F,
+    0xFC, 0xF3, 0x3B, 0x23, 0x05, 0x00, 0x01,
+    0xFC, 0xF3, 0x3B, 0x22, 0xC8, 0x00, 0x29,
+    0xFC, 0xF3, 0x3B, 0x23, 0x48, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x49, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE7, 0x14, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xE8, 0x28, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x0C, 0x02, 0x80,  //0x180
+    0xFC, 0xF3, 0x3B, 0x23, 0xE9, 0x30, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x0D, 0x10, 0x50, //190815 03 00   190808 06 50
+    0xFC, 0xF3, 0x3B, 0x23, 0xEA, 0x78, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEB, 0x00, 0x60,
+    0xFC, 0xF3, 0x3B, 0x23, 0x6E, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x6F, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x70, 0x04, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x32, 0x00, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0x33, 0x00, 0x10,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF5, 0x80, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB3, 0x00, 0x0A,
+    0xFC, 0xF3, 0x3B, 0x22, 0xFA, 0x00, 0x3D,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB4, 0x00, 0x04,
+    0xFC, 0xF3, 0x3B, 0x23, 0x2F, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x39, 0x00, 0x20,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF9, 0x00, 0x4F,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBE, 0x02, 0x80,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB7, 0x00, 0x03,
+    0xFC, 0xF3, 0x3B, 0x23, 0xEC, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF2, 0x00, 0x30,
+    0xFC, 0xF3, 0x3B, 0x22, 0xF8, 0x80, 0x02,
+    0xFC, 0xF3, 0x3B, 0x23, 0x04, 0x03, 0xCF,
+    0xFC, 0xF3, 0x3B, 0x23, 0x10, 0x12, 0x0C,
+    0xFC, 0xF3, 0x3B, 0x23, 0x07, 0xF8, 0xF8,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD0, 0x06, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xCF, 0x60, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD5, 0x60, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x80, 0x08, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0x81, 0x01, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xBC, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xB5, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x23, 0xD3, 0x20, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xC4, 0x06, 0x22,
+    0xFC, 0xF3, 0x3B, 0x23, 0x82, 0x03, 0x40,
+    0xFC, 0xF3, 0x3B, 0x23, 0x28, 0x7F, 0xFF,
+    0xFC, 0xF3, 0x3B, 0x23, 0x2A, 0x00, 0x00,
+    0xFC, 0xF3, 0x3B, 0x22, 0xFB, 0x00, 0x00
+};
+//#endif
+
+
+unsigned int u32fm1288cnt =0;
+
+
+void I2cFM1288TaskTmr(void)
+{
+	if(s_vu16I2cFM1288TaskTmr!=0xffff) s_vu16I2cFM1288TaskTmr++;
+	
+}
+
+unsigned char  IIC_FM1288_WriteData(const unsigned char *p,unsigned short len)
+{
+    IIC_Start();                             /*启动总线*/
+    if (len ==1) {
+   		 IIC_SendByte(DEVICE_ID);                 /*发送器件地址*/
+    	}
+    if(IIC_ack==0)return(0);
+  
+    while(len>0)
+    {           
+        p++;
+        IIC_SendByte(*p);                   
+        if(IIC_ack==0)return(0);                     
+        len--;
+    }
+    IIC_Stop();                              /*结束总线*/ 
+    return 1;
+}
+
+
+
+void IIC_FM1288_Init(void)
+{
+    IIC_init();
+ //   IIC_FM1288_WriteData(HandFreeData,1); 
+ 
+    
+}
+U08 u8FM1288regDate[10] = {0};
+void IIC_FM1288_Tick(void)
+{
+	static U08 u8cnt =0;
+
+   switch (gtI2cstate) {
+        case I2C_ON_RESET:
+            s_vu16I2cFM1288TaskTmr = 0;
+			u8cnt =0;
+	     GPIO_FM1288_RST(0);
+            gtI2cstate ++;
+            break;
+
+        case I2C_ON_INIT:
+            if (s_vu16I2cFM1288TaskTmr < OS_TIMER_200MS) {
+                break;
+            }
+	   GPIO_FM1288_RST(1);
+	   IIC_FM1288_Init(); 
+   
+          s_vu16I2cFM1288TaskTmr = 0;
+           gtI2cstate ++;
+            break;
+
+        case I2C_ON_STABLE:
+            if (s_vu16I2cFM1288TaskTmr < OS_TIMER_2S) {
+                break;
+            }
+	  NewSlaveI2CFM1288Write (0xc0, 834,HandFreeNewAll0808Data); 
+	//  NewSlaveI2CFM1288Write (0xc0, 834,HandFreeNewAll0621Data); 
+	//  NewSlaveI2CFM1288Write (0xc0, 841,HandFreeNewAllData); //TEST1
+
+	//IIC_Delayus(200);      
+	//  NewSlaveI2CFM1288Write (0xc0, 7,HandFreeData); 
+
+	  
+	//SlaveI2CFM1288Write (0xc0, HandFreeAllData[u8cnt][0],HandFreeAllData[u8cnt]);
+	 	 u8cnt++;
+   
+            s_vu16I2cFM1288TaskTmr =0;
+//	if (u8cnt >= (FM1288REGLEN )) {
+	
+           		gtI2cstate++;
+	//	}
+            break;
+
+        case I2C_SYSTEM_RUN:
+	  if (s_vu16I2cFM1288TaskTmr < OS_TIMER_1S) {
+                break;
+            }   
+	
+	  GPIO_FM1288_Mute(RESET);
+	//   SlaveI2CFM1288Write (0xc0, HandFreeAllData[75][0],HandFreeAllData[75]);
+	//  SlaveI2CFM1288Read(0,u8FM1288regDate,0);
+	     if(GPIO_FM1288_LED())
+	         {
+	  		 u8cnt++;
+			 if ( u8cnt >20) {
+	         		//  gtI2cstate = I2C_ON_RESET;
+			 	}
+	          } 
+	       else {
+				u8cnt =0;
+			}
+		s_vu16I2cFM1288TaskTmr =0;
+            break;
+
+        case I2C_OFF_INIT:
+            gtI2cstate++;
+            break;
+
+        case I2C_OFF_SLEEP:
+		
+            break;
+
+        default:
+            break;
+    }
+ 
+}
+

BSP/IIC_FM1288.h

@@ -0,0 +1,29 @@
+#ifndef __IIC_FM1288_H
+#define __IIC_FM1288_H
+    #include "GPIO_IIC_Drv.h"
+    #include "stm32f10x.h" 
+#include "app_def.h"
+
+
+typedef enum {
+    I2C_ON_RESET,
+    I2C_ON_INIT,
+    I2C_ON_STABLE,
+    I2C_SYSTEM_RUN,
+    I2C_OFF_INIT,
+    I2C_OFF_SLEEP,
+     I2C_OFF_WAIT,
+    NumOfI2cState
+} T_I2C_STATE;
+
+
+    void IIC_FM1288_Init(void);
+extern   void IIC_FM1288_Tick(void);
+extern void I2cFM1288TaskTmr(void);
+
+
+extern unsigned int u32fm1288cnt ;
+extern U08 HANDLE ;
+extern U08 gtI2cstate ;
+#endif
+

BSP/TIM1_CAP.c

@@ -0,0 +1,310 @@
+#include "TIM1_CAP.h"
+#include "app_def.h"
+#include "app_msg.h"
+#include "TIM6_1MS.h"
+#include "BSP.h"
+
+//#define debugbustestcomm
+
+unsigned char TIM1_Rev_flag=0;                          //表示正在接收总线数据，0表示当前未接收，1表示当前正在接收。
+
+
+extern unsigned char  RunMode;                          //工作模式
+static unsigned char  Bus_RevLength=146;               //工作模式，0表示注册模式，分机发送注册码长度为146，工作模式时为26              
+extern unsigned char   CallMode;                //通话模式，0;双工 1;单工
+
+extern void BUS_Rev_NewInfo(unsigned char *pInfo);
+
+#define  BUS_REV_MAX        6
+static unsigned short  BUS_Rev_Buf[6][150]={0};
+static unsigned char   BUS_Rev_ReadIndex=0;
+static unsigned char   BUS_Rev_WriteIndex=0;
+
+
+
+static unsigned char TIM1_cc_flag=0;     
+
+unsigned char TIM1_Rev_Buf[30]={0};
+
+unsigned char  gt_busrxflag =0;
+
+
+int TIM1_init(void)
+{
+    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
+    TIM_ICInitTypeDef  TIM_ICInitStructure;
+    NVIC_InitTypeDef NVIC_InitStructure;
+    GPIO_InitTypeDef GPIO_InitStructure; 
+    
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
+    
+    //=================================
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 |GPIO_Pin_10;
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
+    GPIO_Init(GPIOA, &GPIO_InitStructure); 
+    //=================================   
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE);                    //时钟使能
+    TIM_DeInit(TIM1);
+    
+    GPIO_PinRemapConfig(GPIO_PartialRemap_TIM1, ENABLE);
+    //================================= 
+    TIM_TimeBaseStructure.TIM_Period =65535;                                //设置自动重装载寄存器周期值  
+    TIM_TimeBaseStructure.TIM_Prescaler =(720-1);                           //720-1预分频器,100K的计数频率,10us加1.  
+    TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;                 //设置时钟分割  
+    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;             //向上计数模式  
+    TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;                        //重复计数设置  
+    TIM_TimeBaseInit(TIM1, &TIM_TimeBaseStructure);                         //参数初始化
+    
+    TIM_ITConfig(TIM1, TIM_IT_Update, DISABLE);
+   //=================================   
+    TIM_ICInitStructure.TIM_Channel = TIM_Channel_4;                         //选择输入端 IC1映射到TI4上
+    TIM_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Falling;             //下降沿捕获
+    TIM_ICInitStructure.TIM_ICSelection = TIM_ICSelection_DirectTI;          //通道一一对应
+    TIM_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1;                    //配置输入分频,不分频 
+    TIM_ICInitStructure.TIM_ICFilter =5;                                    //IC4F=0011 配置输入滤波器 8个定时器时钟周期滤波
+    TIM_ICInit(TIM1, &TIM_ICInitStructure);                                  //初始化定时器输入捕获通道  
+    TIM_ClearFlag(TIM1,TIM_FLAG_CC4);                                       //清中断标志位
+    TIM_ITConfig(TIM1,TIM_IT_CC4,ENABLE);                                   //允许CC4IE捕获中断
+    TIM_ARRPreloadConfig(TIM1, ENABLE);
+    //================================= 
+    NVIC_InitStructure.NVIC_IRQChannel = TIM1_CC_IRQn;
+    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3;
+    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+    NVIC_Init(&NVIC_InitStructure);    
+    
+   //================================= 
+    TIM_Cmd(TIM1, ENABLE);
+    return 1;
+}
+
+unsigned int itestCC4date[30] = {0};
+unsigned int itestCC4cnt =0;
+void TIM1_CC_IRQHandler(void)
+{
+    static unsigned int lastCC4Value=0;
+    static unsigned short TIM1_CC3[200]={0};
+    unsigned int i,CC4Value;
+    
+   if(TIM_GetITStatus(TIM1,TIM_IT_CC4)!=RESET)
+    {
+        //=========================================
+        i=TIM_GetCapture4(TIM1);
+        if(i>lastCC4Value)
+            CC4Value = i-lastCC4Value;
+        else
+            CC4Value=65535-lastCC4Value+i;
+        lastCC4Value=i;
+	BufSentTime = 40;
+				itestCC4cnt ++;
+				if (itestCC4cnt >25) {
+					itestCC4cnt =0;
+				}
+				itestCC4date[itestCC4cnt] = CC4Value;
+        //=========================================脉冲计算宽度
+        if(CC4Value<=150)
+        {
+            if(lastCC4Value>=CC4Value)
+            {
+                lastCC4Value=lastCC4Value-CC4Value;
+            }
+            else
+            {
+                lastCC4Value=65535-lastCC4Value+CC4Value;
+            }
+        }
+        //=========================================处理误码
+        else
+        {
+            TIM1_CC3[TIM1_cc_flag]=CC4Value;
+            if(TIM1_cc_flag==0)
+            {
+                 if((CC4Value>450)&&(CC4Value<680)) //采集起始位：6ms
+                 {
+                     TIM1_cc_flag=2;
+                     TIM1_CC3[1]=CC4Value;
+		     gtackvalid =0;
+                    // TIM1_Rev_flag=1;
+                 }   
+		else    if((CC4Value>900)&&(CC4Value<1100))//采ACK 10ms
+                {
+			gtackvalid=0 ;
+			return;
+		}
+                 else
+		{
+                    TIM1_cc_flag=1;
+		}
+            }
+            else if(TIM1_cc_flag==1)
+            {
+                 if((CC4Value>450)&&(CC4Value<680)) //采集起始位：6ms
+                 {
+                     TIM1_cc_flag=2;
+                     TIM1_CC3[1]=CC4Value;
+		      gtackvalid =0;
+                 }    
+		else    if((CC4Value>900)&&(CC4Value<1100)) //采ACK 10ms
+                 {
+                     gtackvalid=0 ;
+			return;
+		}
+            }
+            else if(TIM1_cc_flag<Bus_RevLength)
+            {    
+               TIM1_cc_flag++;
+              if((CC4Value>450)&&(CC4Value<680)) //采集起始位：6ms
+		{
+                     TIM1_cc_flag=2;
+		         gtackvalid =0;
+		}  
+		else    if((CC4Value>900)&&(CC4Value<1100))//采ACK 10ms
+		{
+               	     gtackvalid=0 ;
+			return;			 
+		}
+            }
+		
+            //============================================================================
+            if(TIM1_cc_flag==Bus_RevLength)                             //接收完成，进行上传
+            {
+               for(i=2;i<Bus_RevLength;i++)
+               {
+                    BUS_Rev_Buf[BUS_Rev_WriteIndex][i-2]= TIM1_CC3[i];
+               }
+               BUS_Rev_WriteIndex++;
+               if(BUS_Rev_WriteIndex>=BUS_REV_MAX)BUS_Rev_WriteIndex=0;
+               TIM1_cc_flag=0;
+               //TIM1_Rev_flag=0;               
+            }
+            else if(TIM1_cc_flag>Bus_RevLength)  
+            {
+                TIM1_cc_flag=0;
+           //     TIM1_Rev_flag=0; 
+            }
+            //============================================================================
+        }     
+        TIM_ClearITPendingBit(TIM1, TIM_IT_CC4);
+    }
+}
+
+#ifdef   debugbustestcomm
+unsigned short dwdcnt =0;
+unsigned short dwdcnt2 =0;
+unsigned short dwdcnt3 =0;
+
+#endif
+void BUS_Rev_Tick(void)
+{
+
+    unsigned short i,j,k;
+    unsigned short checkSum=0;
+    //=======================================
+   if(RunMode==0)
+    {
+        Bus_RevLength=146;
+    }
+    else
+    {
+        Bus_RevLength=26;
+    }
+		#ifdef   debugbustestcomm
+			dwdcnt2 ++;	
+			if (dwdcnt2 == 110) {
+				
+					  OSQPost(BusMsgQueue, BUS_MSG_REGEDITSTATE, TO_WORD(0xff, 'Y'));
+					  dwdcnt2 =0;
+				} else 	if (dwdcnt2 >200) {
+						dwdcnt2 =0;
+					  OSQPost(BusMsgQueue, BUS_MSG_REGEDITSTATE, TO_WORD(0xff, 'Y'));
+				}  else 	if (dwdcnt2 >100) {
+						dwdcnt2 =0;
+						  OSQPost(BusMsgQueue, BUS_MSG_REGEDITSTATE, TO_WORD(0xff, 'Y'));
+					 // OSQPost(BusMsgQueue, BUS_MSG_EXTENDATA5, TO_WORD(0x11, 0x39));
+				}
+		#endif
+    //=======================================
+    if(BUS_Rev_WriteIndex != BUS_Rev_ReadIndex)
+    {
+        for(i=0;i<30;i++)
+        {
+            TIM1_Rev_Buf[i]=0;
+        }
+        //=======================================
+        for(i=0;i<(Bus_RevLength-2);i++)
+        {
+            if(BUS_Rev_Buf[BUS_Rev_ReadIndex][i]>360)  //230409
+            {
+                if(i>0)
+                {
+                    if(BUS_Rev_Buf[BUS_Rev_ReadIndex][i-1]<280)
+                    {
+                        BUS_Rev_Buf[BUS_Rev_ReadIndex][i-1]+=100;
+                    }
+                    else
+                    {
+                        BUS_Rev_Buf[BUS_Rev_ReadIndex][i+1]+=100;
+                    }
+                }
+                else
+                {
+                     BUS_Rev_Buf[BUS_Rev_ReadIndex][i+1]+=100;
+                }
+                BUS_Rev_Buf[BUS_Rev_ReadIndex][i]-=100;
+            }
+      }
+     //=======================================再次处理误码
+       for(i=0;i<(Bus_RevLength-2);i++)
+       {
+           k=(i)/8;
+           j=(i)%8;
+           if((BUS_Rev_Buf[BUS_Rev_ReadIndex][i]>250)&&(BUS_Rev_Buf[BUS_Rev_ReadIndex][i]<500))  //数据位：1
+           {
+                TIM1_Rev_Buf[k]|=(1<<j);
+           }      
+       }
+       //=======================================================
+       if(RunMode==0)
+       {
+            checkSum=0;
+            for(i=0;i<17;i++)
+            {
+                checkSum+=TIM1_Rev_Buf[i];
+            }
+            checkSum+=(TIM1_Rev_Buf[17]&0x0F);
+            i=(TIM1_Rev_Buf[17]>>4)&0x0F;
+            if((checkSum&0x0F)==i)
+            {   
+                TIM1_Rev_Buf[17]=TIM1_Rev_Buf[17]&0x0F;     
+                BUS_Rev_NewInfo(TIM1_Rev_Buf);
+            } else {
+
+			#ifdef   debugbustestcomm
+				dwdcnt ++;
+			#endif
+            	}
+       }
+       else
+       {
+						
+            checkSum=TIM1_Rev_Buf[0];
+            checkSum+=TIM1_Rev_Buf[1];
+            checkSum+=(TIM1_Rev_Buf[2]&0x0F);
+            i=(TIM1_Rev_Buf[2]>>4)&0x0F;
+            if((checkSum&0x0F)==i)
+            {   
+                TIM1_Rev_Buf[2]=TIM1_Rev_Buf[2]&0x0F;     
+                BUS_Rev_NewInfo(TIM1_Rev_Buf);
+            } else if ((TIM1_Rev_Buf[2] == 'C') || (TIM1_Rev_Buf[2] == 'S')) {
+                 	 BUS_Rev_146BInfo(TIM1_Rev_Buf);  // working find device
+            	}
+       }     
+       BUS_Rev_ReadIndex++;
+       if(BUS_Rev_ReadIndex>=BUS_REV_MAX)BUS_Rev_ReadIndex=0;
+    }
+     
+ }   
+    
+

BSP/TIM1_CAP.h

@@ -0,0 +1,11 @@
+#ifndef __TIM1_CAP_H__
+#define __TIM1_CAP_H__
+
+    #include 		"stm32f10x.h"
+    
+    extern int TIM1_init(void);
+    extern void BUS_Rev_Tick(void);
+   extern unsigned char  gt_busrxflag;                          //´¦ÀíÈßÓàÖ¸Áî
+ #endif
+
+

BSP/TIM6_1MS.c

@@ -0,0 +1,550 @@
+#include "TIM6_1MS.h"
+#include "bsp.h"
+#include "app_def.h"
+
+
+#define BusTx_Check_STATE		GPIO_ReadInputDataBit(GPIOA,GPIO_Pin_8)
+extern unsigned char TIM1_Rev_flag;                          //表示正在接收总线数据，0表示当前未接收，1表示当前正在接收。
+
+extern unsigned int LocalTime;
+unsigned char   CallLineMode =0 ; 
+U08 gtackvalid = 0;
+U08 gfxq_cmd =0;
+
+unsigned char BUS_SendBuf[4];                   //应用层发送数据
+unsigned char BUS_SendBitBuf[30];                   //应用层发送中断位
+//============================================   
+static unsigned char BUS_SendInex=0;
+// static unsigned char BUS_SendingBuf[4];           //定时器正在处理数据
+
+static void s_frmBusTxNull(U16  prm) ;
+static void s_frmBusTxEntenData4(U16  prm) ;
+static void s_frmBusTxEntenData5(U16  prm) ;
+static void s_frmBusTxEntenData6(U16  prm) ;
+static void s_frmBusTxEntenData7(U16  prm) ;
+static void s_frmBusTxEntenData8(U16  prm) ;
+static void s_frmBusTxEntenData9(U16  prm) ;
+static void s_frmBusTxRegeditQuest(U16  prm) ;
+static void s_frmBusTxRegeditState(U16  prm) ;
+static void s_frmBusTxCallMode(U16  prm) ;
+static void s_frmBusTxEntenData20(U16  prm) ;
+static void s_frmBusTxEntenData21(U16  prm) ;
+static void s_frmBusTxSigAck(U16  prm);
+static void s_frmBusTxEveAck(U16  prm) ;
+static void s_frmBusTxFxq1(U16  prm);
+static void s_frmBusTxFxq2(U16  prm);
+//============================================ 
+ unsigned char Bus_SendStart=0;
+
+int TIM6_init(void)
+{
+    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
+    NVIC_InitTypeDef NVIC_InitStructure;
+    GPIO_InitTypeDef GPIO_InitStructure; 
+    
+    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6,ENABLE);
+    TIM_DeInit(TIM6);
+    TIM_TimeBaseStructure.TIM_Prescaler = 72 - 1;        //72000000/72=1M
+    TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
+    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
+    TIM_TimeBaseStructure.TIM_Period = 100 - 1;            //初始值  F=1M/100=10KHz
+    TIM_TimeBaseInit(TIM6,&TIM_TimeBaseStructure);
+   
+    //=========================================================
+    TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+    TIM_ITConfig(TIM6,TIM_IT_Update,DISABLE);
+    TIM_ClearFlag(TIM6, TIM_FLAG_Update);
+    
+    NVIC_InitStructure.NVIC_IRQChannel = TIM6_IRQn;
+    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
+    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+    NVIC_Init(&NVIC_InitStructure);
+    TIM_Cmd(TIM6, ENABLE);
+    //=========================================================
+   
+    //PA9用于主端发码
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; 
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+    GPIO_Init(GPIOA, &GPIO_InitStructure);
+    GPIO_ResetBits(GPIOA,GPIO_Pin_9);
+
+    //PA8 用于检测发码情况
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; 
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+    GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+   gtackvalid =0;
+    return 1;
+    
+}
+void BUS_SendData(T_BUS_FRAME c)
+{
+     unsigned char i=0;
+    //===========================
+  //  while(BUS_SendInex>0);
+  //  while(TIM1_Rev_flag>0);
+    
+    //===========================
+    i     =     HI_BYTE(c.DaddressDate);
+    i     +=    LO_BYTE(c.DaddressDate);
+   c.DataType &=0x0F;
+    i     +=     c.DataType ;
+    c.DataType |=((i&0x0F)<<4);
+    //===========================
+      BUS_SendBuf[0]=HI_BYTE(c.DaddressDate);
+      BUS_SendBuf[1]= LO_BYTE(c.DaddressDate);
+      BUS_SendBuf[2]= c.DataType;
+	//  处理数据
+	BUS_SendBitBuf[0] =  ((BUS_SendBuf[0] >>0) &0x01);
+	BUS_SendBitBuf[1] =  ((BUS_SendBuf[0] >>1) &0x01);
+	BUS_SendBitBuf[2] =  ((BUS_SendBuf[0] >>2) &0x01);
+	BUS_SendBitBuf[3] =  ((BUS_SendBuf[0] >>3) &0x01);
+	BUS_SendBitBuf[4] =  ((BUS_SendBuf[0] >>4) &0x01);
+	BUS_SendBitBuf[5] =  ((BUS_SendBuf[0] >>5) &0x01);
+	BUS_SendBitBuf[6] =  ((BUS_SendBuf[0] >>6) &0x01);
+	BUS_SendBitBuf[7] =  ((BUS_SendBuf[0] >>7) &0x01);	
+
+	BUS_SendBitBuf[8] =  ((BUS_SendBuf[1] >>0) &0x01);
+	BUS_SendBitBuf[9] =  ((BUS_SendBuf[1] >>1) &0x01);
+	BUS_SendBitBuf[10] =  ((BUS_SendBuf[1] >>2) &0x01);
+	BUS_SendBitBuf[11] =  ((BUS_SendBuf[1] >>3) &0x01);
+	BUS_SendBitBuf[12] =  ((BUS_SendBuf[1] >>4) &0x01);
+	BUS_SendBitBuf[13] =  ((BUS_SendBuf[1] >>5) &0x01);
+	BUS_SendBitBuf[14] =  ((BUS_SendBuf[1] >>6) &0x01);
+	BUS_SendBitBuf[15] =  ((BUS_SendBuf[1] >>7) &0x01);		
+
+	BUS_SendBitBuf[16] =  ((BUS_SendBuf[2] >>0) &0x01);
+	BUS_SendBitBuf[17] =  ((BUS_SendBuf[2] >>1) &0x01);
+	BUS_SendBitBuf[18] =  ((BUS_SendBuf[2] >>2) &0x01);
+	BUS_SendBitBuf[19] =  ((BUS_SendBuf[2] >>3) &0x01);
+	BUS_SendBitBuf[20] =  ((BUS_SendBuf[2] >>4) &0x01);
+	BUS_SendBitBuf[21] =  ((BUS_SendBuf[2] >>5) &0x01);
+	BUS_SendBitBuf[22] =  ((BUS_SendBuf[2] >>6) &0x01);
+	BUS_SendBitBuf[23] =  ((BUS_SendBuf[2] >>7) &0x01);		
+	
+	
+    //===========================
+    	Bus_SendStart=1;
+}
+
+void BUS_SendData2(T_BUS_FRAME c)
+{
+     unsigned char i=0;
+    //===========================
+  //  while(BUS_SendInex>0);
+  //  while(TIM1_Rev_flag>0);
+    
+    //===========================
+
+     c.DataType &=0x0F;
+  
+    //===========================
+	    BUS_SendBuf[0]= (c.DataType <<4);
+			BUS_SendBuf[0] |=  (HI_BYTE(c.DaddressDate)>>4);
+			BUS_SendBuf[1] = ((HI_BYTE(c.DaddressDate)&0x0f) <<4);
+      BUS_SendBuf[1] |= (LO_BYTE(c.DaddressDate)>>4);
+      BUS_SendBuf[2]= (LO_BYTE(c.DaddressDate)&0x0f);
+	
+	    i=(BUS_SendBuf[0]+ BUS_SendBuf[1]+(BUS_SendBuf[2]&0x0F))&0x0F;
+			BUS_SendBuf[2] |= ((i&0x0F)<<4);
+	
+    //  BUS_SendBuf[0]=HI_BYTE(c.DaddressDate);
+    //  BUS_SendBuf[1]= LO_BYTE(c.DaddressDate);
+    //  BUS_SendBuf[2]= c.DataType;
+	//  处理数据
+	BUS_SendBitBuf[0] =  ((BUS_SendBuf[0] >>0) &0x01);
+	BUS_SendBitBuf[1] =  ((BUS_SendBuf[0] >>1) &0x01);
+	BUS_SendBitBuf[2] =  ((BUS_SendBuf[0] >>2) &0x01);
+	BUS_SendBitBuf[3] =  ((BUS_SendBuf[0] >>3) &0x01);
+	BUS_SendBitBuf[4] =  ((BUS_SendBuf[0] >>4) &0x01);
+	BUS_SendBitBuf[5] =  ((BUS_SendBuf[0] >>5) &0x01);
+	BUS_SendBitBuf[6] =  ((BUS_SendBuf[0] >>6) &0x01);
+	BUS_SendBitBuf[7] =  ((BUS_SendBuf[0] >>7) &0x01);	
+
+	BUS_SendBitBuf[8] =  ((BUS_SendBuf[1] >>0) &0x01);
+	BUS_SendBitBuf[9] =  ((BUS_SendBuf[1] >>1) &0x01);
+	BUS_SendBitBuf[10] =  ((BUS_SendBuf[1] >>2) &0x01);
+	BUS_SendBitBuf[11] =  ((BUS_SendBuf[1] >>3) &0x01);
+	BUS_SendBitBuf[12] =  ((BUS_SendBuf[1] >>4) &0x01);
+	BUS_SendBitBuf[13] =  ((BUS_SendBuf[1] >>5) &0x01);
+	BUS_SendBitBuf[14] =  ((BUS_SendBuf[1] >>6) &0x01);
+	BUS_SendBitBuf[15] =  ((BUS_SendBuf[1] >>7) &0x01);		
+
+	BUS_SendBitBuf[16] =  ((BUS_SendBuf[2] >>0) &0x01);
+	BUS_SendBitBuf[17] =  ((BUS_SendBuf[2] >>1) &0x01);
+	BUS_SendBitBuf[18] =  ((BUS_SendBuf[2] >>2) &0x01);
+	BUS_SendBitBuf[19] =  ((BUS_SendBuf[2] >>3) &0x01);
+	BUS_SendBitBuf[20] =  ((BUS_SendBuf[2] >>4) &0x01);
+	BUS_SendBitBuf[21] =  ((BUS_SendBuf[2] >>5) &0x01);
+	BUS_SendBitBuf[22] =  ((BUS_SendBuf[2] >>6) &0x01);
+	BUS_SendBitBuf[23] =  ((BUS_SendBuf[2] >>7) &0x01);		
+	
+	
+    //===========================
+    	Bus_SendStart=1;
+}
+
+void BUSMODE_SendTick(void)
+{
+   	static U08 laytime =0;
+		static U08 u8cnt1 =0;
+	  static U08 u8cnt2 =0;
+		static U08 u8line =0xff;
+  	static U08 u8oldline =0xff;
+	
+		laytime ++;	
+	  if ( laytime <30)  //35*30 =1s
+		{
+				return;
+		} else {
+			laytime = 100;
+		}
+	
+	 GpioLineCheckInputVal();
+	 if (GpioLineCheckInputVal()) {
+		 u8cnt1 ++;
+		 u8cnt2 =0;
+			if (u8cnt1 >30) {
+			  	u8cnt1 =0;
+					u8line = 1; //3线
+					if ( u8line == u8oldline) {
+						return;
+					}
+				  CallLineMode =1;   //1：三线制 0:两线制
+					u8oldline =1;
+				   OSQPost(BusMsgQueue, BUS_MSG_CALLMODE, TO_WORD(0xff,'Y'));
+		       OSQPost(BusMsgQueue, BUS_MSG_CALLMODE, TO_WORD(0xff,'Y'));  
+		       OSQPost(BusMsgQueue, BUS_MSG_CALLMODE, TO_WORD(0xff, 'Y'));   
+					 GpioSwLineOutput_L;
+			}
+	  } else {
+			 u8cnt2 ++;
+		  u8cnt1 =0;
+			if (u8cnt2 >30) {
+			  	u8cnt2 =0;
+					u8line = 0; //2线
+					if ( u8line == u8oldline) {
+						return;
+					}
+				  CallLineMode =0;   //1：三线制 0:两线制
+					u8oldline =0;
+				   OSQPost(BusMsgQueue, BUS_MSG_CALLMODE, TO_WORD(0xff, 'N'));
+		       OSQPost(BusMsgQueue, BUS_MSG_CALLMODE, TO_WORD(0xff, 'N'));  
+		       OSQPost(BusMsgQueue, BUS_MSG_CALLMODE, TO_WORD(0xff,  'N'));    
+					GpioSwLineOutput_H;
+			}
+			
+		}
+
+}
+
+
+//注:1ms中断  改0.1ms中断
+void TIM6_IRQHandler (void)
+{
+    static U08 flag=0; 
+    if(TIM_GetITStatus(TIM6, TIM_IT_Update)== SET)
+    {
+        TIM_ClearITPendingBit(TIM6 , TIM_FLAG_Update); 
+        //==================================================
+         if(flag>=10)
+         {
+            GPIOA->BSRR = GPIO_Pin_9;           //总线为低电平
+            flag--;
+            return;    
+         }
+         else if((flag<=9) && (flag!=0))
+         {
+            GPIOA->BRR = GPIO_Pin_9;            //总线为高电平
+            flag --;
+            return;             
+         }
+        if((BUS_SendInex>0)&&(flag==0))
+        {      
+            if(BUS_SendInex==1)                 //起始位：总线5ms低电平
+            { 
+                 flag=41;//41-9 =3.3ms
+                 GPIOA->BSRR = GPIO_Pin_9;
+                 BUS_SendInex++;
+            }
+            else if(BUS_SendInex<(24+3))
+            {
+        	   if (BUS_SendBitBuf[BUS_SendInex-2]) {  //数据位1：2ms低电平 
+			 flag= 27;
+		} else {                               //数据位0：1ms低电平
+			 flag= 17;
+		}  				
+		 GPIOA->BSRR = GPIO_Pin_9;
+                BUS_SendInex++;
+            }
+            else if(BUS_SendInex==(24+3))
+            {					
+                flag=0; 
+		 GPIOA->BRR = GPIO_Pin_9;  
+                BUS_SendInex++;               
+            }
+            else
+            {
+                BUS_SendInex=0;
+                GPIOA->BRR = GPIO_Pin_9;  
+                flag=0;
+                TIM_ITConfig(TIM6,TIM_IT_Update,DISABLE); 
+            }
+         } 
+        //==================================================
+
+    }
+}
+
+const fp_prm arryBusTxTbl[NomOfBusTxMsg] = {
+    s_frmBusTxNull,
+    s_frmBusTxEntenData4,    //BUS_MSG_EXTENDATA4
+    s_frmBusTxEntenData5,    //BUS_MSG_EXTENDATA5
+    s_frmBusTxEntenData6,    //BUS_MSG_EXTENDATA6
+    s_frmBusTxEntenData7,    //BUS_MSG_EXTENDATA7
+    s_frmBusTxEntenData8,    //BUS_MSG_EXTENDATA8
+    s_frmBusTxEntenData9,    //BUS_MSG_EXTENDATA9
+    s_frmBusTxRegeditQuest,    //BUS_MSG_REGEDITQUEST
+    s_frmBusTxRegeditState,    //BUS_MSG_REGEDITSTATE
+    s_frmBusTxCallMode,   // BUS_MSG_CALLMODE
+	  s_frmBusTxEntenData20,    //BUS_MSG_EXTENDATA20
+	  s_frmBusTxEntenData21,    //BUS_MSG_EXTENDATA21
+	  s_frmBusTxSigAck,      //BUS_MSG_SIGINACK
+	  s_frmBusTxEveAck,  //BUS_MSG_EVEACK
+	  s_frmBusTxFxq1,  //BUS_MSG_FXQ1
+	  s_frmBusTxFxq2,  //BUS_MSG_FXQ2
+};
+
+/*----------------------------------------------------------------------
+// Function name    : BUS_Rev_TxTask
+// Input  parameter : 
+// Output parameter : 
+// Use  Function    : 数据约65ms一帧
+// Reserve  date    : 09:18am, 7.July.2019, written by dwd
+ ----------------------------------------------------------------------*/
+void BUS_Rev_TxTask(void)
+{
+	static U08 u8cnt =0;
+	T_MESSAGE   *pmsg;
+
+	
+	if (Bus_SendStart ) {  //15*(5+1) =90ms后发下一帧90-65,间隔25MS
+			u8cnt ++;
+			if (u8cnt >=5) {
+					u8cnt =0;
+					Bus_SendStart =0;
+				}
+			return;
+	} else {
+		u8cnt =0;
+	}
+
+	if (BufSentTime)  { 
+			return;
+	} 
+	pmsg = OSQGet(BusMsgQueue);
+
+	if ((pmsg->id) &&(pmsg->id < NomOfBusTxMsg)) {
+		arryBusTxTbl[pmsg->id](pmsg->prm);
+	}	
+}
+
+static void s_frmBusTxNull(U16  prm) 
+{
+
+	prm =prm;
+
+}
+
+static void s_frmBusTxEntenData4(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 4;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+         if (gtackvalid ) {
+		 	gtackvalid --;
+			   OSQPost(BusMsgQueue, BUS_MSG_EXTENDATA4, prm);
+         	}
+ 
+}
+
+
+static void s_frmBusTxEntenData5(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 5;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+	    if (gtackvalid ) {
+		 	gtackvalid --;
+			   OSQPost(BusMsgQueue, BUS_MSG_EXTENDATA5, prm);
+         	}
+ 
+}
+
+static void s_frmBusTxEntenData6(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 6;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+static void s_frmBusTxEntenData7(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 7;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+static void s_frmBusTxEntenData20(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 2;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+
+static void s_frmBusTxEntenData21(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 3;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+static void s_frmBusTxSigAck(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 1;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+static void s_frmBusTxEntenData8(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 8;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+static void s_frmBusTxEntenData9(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 9;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+ 
+}
+
+static void s_frmBusTxRegeditQuest(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 0xd;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE); 
+}
+
+
+static void s_frmBusTxRegeditState(U16  prm) 
+{
+       T_BUS_FRAME  brm = {0};
+
+	   brm.DaddressDate = prm;
+	   brm.DataType = 0xe;
+	  BUS_SendData(brm);
+        BUS_SendInex=1;
+        TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+}
+
+static void s_frmBusTxCallMode(U16  prm) 
+{
+		T_BUS_FRAME  brm = {0};
+
+		brm.DaddressDate = prm;
+		brm.DataType = 0xf;
+		BUS_SendData(brm);
+		BUS_SendInex=1;
+		TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+}
+
+static void s_frmBusTxEveAck(U16  prm) 
+{
+		T_BUS_FRAME  brm = {0};
+
+		brm.DaddressDate = prm;
+		brm.DataType = 10;
+		BUS_SendData(brm);
+		BUS_SendInex=1;
+		TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+}
+
+static void s_frmBusTxFxq1(U16  prm) 
+{
+		T_BUS_FRAME  brm = {0};
+
+		brm.DaddressDate = prm;
+		brm.DataType = gfxq_cmd;
+	
+		BUS_SendData2(brm);
+		BUS_SendInex=1;
+		TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+}
+
+static void s_frmBusTxFxq2(U16  prm) 
+{
+		T_BUS_FRAME  brm = {0};
+
+		brm.DaddressDate = prm;
+		brm.DataType = gfxq_cmd|0x08;
+		
+		BUS_SendData2(brm);
+		BUS_SendInex=1;
+		TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
+}

BSP/TIM6_1MS.h

@@ -0,0 +1,44 @@
+#ifndef __TIM6_1MS_H__
+#define __TIM6_1MS_H__
+
+#include 		"stm32f10x.h"
+#include "app_def.h"
+#include "app_msg.h"
+
+typedef enum {
+	BUS_MSG_NULL, 
+	BUS_MSG_EXTENDATA4,  //主机呼叫或子机应答
+	BUS_MSG_EXTENDATA5,  //主机挂断分机
+	BUS_MSG_EXTENDATA6,  //主机广播
+	BUS_MSG_EXTENDATA7,  //打开门灯
+	BUS_MSG_EXTENDATA8,  //关闭门灯
+	BUS_MSG_EXTENDATA9,  //取消紧急按钮
+	BUS_MSG_REGEDITQUEST,  //请求注册0x0d
+	BUS_MSG_REGEDITSTATE,  //切换工作模式0x0e
+	BUS_MSG_CALLMODE,  //切换通话模式0X10
+	BUS_MSG_EXTENDATA20,  //打开门灯
+	BUS_MSG_EXTENDATA21,  //打开门灯
+	BUS_MSG_SIGINACK,  //签到反馈
+	BUS_MSG_EVEACK,  //清除所有事件
+	BUS_MSG_FXQ1,  //分线器协议
+	BUS_MSG_FXQ2,  //分线器协议
+	NomOfBusTxMsg
+   }NumOfHostMsg;
+
+typedef struct{
+   U16             DaddressDate;                 
+    U08             DataType;  
+	
+}T_BUS_FRAME;
+
+extern unsigned char   CallLineMode;                //1：三线制 0:两线制
+extern unsigned char BUS_SendBuf[];              //应用层发送数据
+extern unsigned char Bus_SendStart;
+extern U08 gtackvalid;
+extern U08 gfxq_cmd;
+extern int TIM6_init(void);
+extern void BUS_SendData(T_BUS_FRAME c);
+extern void BUS_SendData2(T_BUS_FRAME c);
+extern void BUSMODE_SendTick(void);
+extern void BUS_Rev_TxTask(void);
+#endif

BSP/UART_ARM.c

@@ -0,0 +1,180 @@
+#include "UART_ARM.h"
+#include "TIM6_1MS.h"
+#include "app_def.h"
+
+#define UART_BUFSIZE    1024
+unsigned int UART_Rev_WriteInex=0;
+unsigned int UART_Rev_ReadIndex=0;
+unsigned char UART_Rev_Buf[1024];
+
+unsigned int UART_Send_WriteIndex=0;
+unsigned int UART_Send_ReadIndex=0;
+unsigned char UART_Send_Buf[1024];
+static unsigned char UART_SendingFlag=0;       //UART发送中标识，0表示非发送中
+U16 UartBusTime =0;    //收到长的BUS数据，延时发UART指令
+
+extern void UART_Rev_NewInfo(unsigned char *pInfo);
+int UART_ARM_init(void)
+{
+    GPIO_InitTypeDef GPIO_InitStruct;	
+	NVIC_InitTypeDef NVIC_InitStruct;
+    USART_InitTypeDef USART_InitStructure;
+    
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO,ENABLE);
+ 	//===================================
+	//打开引脚时钟
+    UART_ARM_Tx_RccOpen();
+    UART_ARM_Rx_RccOpen();
+	//===================================   
+    //Tx,Rx设置为复用引脚，注意：输入要设置浮空输入
+	GPIO_InitStruct.GPIO_Mode		= GPIO_Mode_AF_PP;
+	GPIO_InitStruct.GPIO_Speed		= GPIO_Speed_50MHz;
+    GPIO_InitStruct.GPIO_Pin		= UART_ARM_Tx_Line;
+    GPIO_Init(UART_ARM_Tx_Port,&GPIO_InitStruct);
+	//==
+    GPIO_InitStruct.GPIO_Mode		= GPIO_Mode_IN_FLOATING;
+	GPIO_InitStruct.GPIO_Pin		= UART_ARM_Rx_Line;
+    GPIO_Init(UART_ARM_Rx_Port,&GPIO_InitStruct);   
+    //===================================
+    //引脚重映射
+    UART_ARM_Remap();
+    //===================================
+    UART_ARM_RccOpen();											                                //打开串口时钟
+	USART_DeInit(UART_ARM_Periph);								                                //初始化为默认值
+	USART_InitStructure.USART_BaudRate						= 115200;			                //波特率
+	USART_InitStructure.USART_WordLength					= USART_WordLength_8b;	            //8位数据
+	USART_InitStructure.USART_StopBits						= USART_StopBits_1;					//1位停止位
+	USART_InitStructure.USART_Parity						= USART_Parity_No;					//无校验
+	USART_InitStructure.USART_Mode							= USART_Mode_Rx | USART_Mode_Tx;	//双工
+	USART_InitStructure.USART_HardwareFlowControl	        = USART_HardwareFlowControl_None;	//无协议控制
+	USART_Init(UART_ARM_Periph,&USART_InitStructure);											//初始化
+	USART_Cmd(UART_ARM_Periph,ENABLE);		
+    //===================================
+	//打开串口中断
+	USART_ClearITPendingBit(UART_ARM_Periph,USART_IT_RXNE);								        //先清掉中断标志位
+        USART_ClearITPendingBit(UART_ARM_Periph,USART_IT_TXE);								        //先清掉中断标志位
+	USART_ITConfig(UART_ARM_Periph,USART_IT_RXNE,ENABLE);								        //打开串口接收中断      
+    //===================================    
+	//对中断进行初始化
+	NVIC_InitStruct.NVIC_IRQChannel							= UART_ARM_IRQ;			            //中断号
+	NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority	    = UART_ARM_PPriority;               //抢占级
+	NVIC_InitStruct.NVIC_IRQChannelSubPriority				= UART_ARM_SPriority;               //响应级
+	NVIC_InitStruct.NVIC_IRQChannelCmd						= ENABLE;					        //打开该中断
+	NVIC_Init(&NVIC_InitStruct);
+	//缓冲区初始化
+    //=================================== 
+    UART_Rev_WriteInex=0;
+    UART_Rev_ReadIndex=0;
+    UART_Send_WriteIndex=0;
+    UART_Send_ReadIndex=0;
+    UART_SendingFlag=0;
+    return 1;
+}
+
+
+unsigned int u16cnttest =0;
+void UART_Tick(void)
+{
+    unsigned int i;
+    static unsigned char UART_Rev_Data[100]={0};
+    static unsigned int  UART_Rev_DataIndex=0;
+
+
+
+    //============================================================================
+    //查询是否有发送任务
+		
+	
+    if(UART_SendingFlag==0)
+    {
+//	if ( UartBusTime < 300) {  //避免上行下行干扰
+//	    	return;
+//	}
+        if(UART_Send_WriteIndex!=UART_Send_ReadIndex)
+        {
+           UART_SendingFlag=0xFF;
+           i=UART_Send_ReadIndex;
+           UART_Send_ReadIndex++;
+           if(UART_Send_ReadIndex>=UART_BUFSIZE)  UART_Send_ReadIndex=0; 
+           USART_SendData(UART_ARM_Periph, UART_Send_Buf[i]); 
+           USART_ITConfig(UART_ARM_Periph,USART_IT_TXE,ENABLE);								        //打开串口发送中断   
+        }   
+    }
+ // if ( Bus_SendStart ) {
+//		return;
+  //	}
+    //============================================================================
+    if(UART_Rev_WriteInex!=UART_Rev_ReadIndex)
+    {
+        while(UART_Rev_WriteInex!=UART_Rev_ReadIndex)
+        {
+            //====================================================== 
+            if(UART_Rev_Buf[UART_Rev_ReadIndex]=='$')
+            {
+               UART_Rev_DataIndex=0;
+               UART_Rev_Data[0]='$';     
+            }
+            else if(UART_Rev_Buf[UART_Rev_ReadIndex]=='#')
+            {
+                UART_Rev_Data[UART_Rev_DataIndex]='#'; 
+                UART_Rev_NewInfo(UART_Rev_Data);
+                UART_Rev_DataIndex=0;
+            }
+            else
+            {
+                UART_Rev_Data[UART_Rev_DataIndex]=UART_Rev_Buf[UART_Rev_ReadIndex];  
+            }
+           UART_Rev_DataIndex++;
+           if(UART_Rev_DataIndex>=100)  UART_Rev_DataIndex=0; 
+           //====================================================== 
+           UART_Rev_ReadIndex++;
+          if(UART_Rev_ReadIndex>=UART_BUFSIZE)  UART_Rev_ReadIndex=0;  
+        }
+    }
+}
+
+void UART_Send(unsigned char *pdata,unsigned short len)
+{
+    while(len>0)
+    {
+         UART_Send_Buf[UART_Send_WriteIndex]=*pdata;
+         UART_Send_WriteIndex++;
+         if(UART_Send_WriteIndex>=UART_BUFSIZE)  
+             UART_Send_WriteIndex=0;
+         pdata++;
+         len--;
+    }
+}
+
+
+
+void UART_ARM_IRQ_Handler()
+{
+    unsigned int i;
+    //处理接收中断
+    //============================================
+    if(USART_GetITStatus(UART_ARM_Periph, USART_IT_RXNE) != RESET)
+    {
+        UART_Rev_Buf[UART_Rev_WriteInex]=USART_ReceiveData(UART_ARM_Periph);
+        UART_Rev_WriteInex++;
+        if(UART_Rev_WriteInex>=UART_BUFSIZE)  UART_Rev_WriteInex=0;
+    }
+    //============================================
+    //处理发送中断
+    if(USART_GetITStatus(UART_ARM_Periph, USART_IT_TXE) != RESET)
+   {
+        if(UART_Send_ReadIndex!=UART_Send_WriteIndex)
+        {
+            i=UART_Send_ReadIndex;
+            UART_Send_ReadIndex++;
+            if(UART_Send_ReadIndex>=UART_BUFSIZE)  UART_Send_ReadIndex=0;             
+            USART_SendData(UART_ARM_Periph, UART_Send_Buf[i]); 
+        }
+        else
+        {
+            UART_SendingFlag=0;
+            USART_ITConfig(UART_ARM_Periph,USART_IT_TXE,DISABLE);								        //关闭串口发送中断   
+        }
+   }
+}
+

BSP/UART_ARM.h

@@ -0,0 +1,34 @@
+#ifndef __USART_ARM_H
+#define __USART_ARM_H
+
+    #include 		"stm32f10x.h"
+    #include "app_def.h"
+    
+    #define				UART_ARM_PPriority			3
+    #define				UART_ARM_SPriority			0
+    //==================================
+    #define             UART_ARM_Periph_Num         2
+    #define             UART_ARM_ReMap_Num          0
+
+
+    #include 		"UART_ARM_CONFIG.h"   
+    //==================================   
+    extern int UART_ARM_init(void);
+    extern void UART_Tick(void);
+    extern void UART_Send(unsigned char *pdata,unsigned short len);
+    extern void UART_Tick(void);
+    
+    
+    #define UART_BUFSIZE    1024
+    extern unsigned int     UART_Rev_WriteInex;
+    extern unsigned int     UART_Rev_ReadIndex;
+    extern unsigned char    UART_Rev_Buf[];
+
+    extern unsigned int     UART_Send_WriteIndex;
+    extern unsigned int     UART_Send_ReadIndex;
+    extern unsigned char    UART_Send_Buf[];   
+    extern U16 UartBusTime ;
+   
+ 
+    
+#endif

BSP/UART_ARM_CONFIG.h

@@ -0,0 +1,137 @@
+#ifndef __USART_ARM_DEFINE_H
+#define __USART_ARM_DEFINE_H
+    //===========================================================
+    //若没有定义，则采用以下默认值
+    #ifndef			UART_ARM_Periph_Num
+        #define		UART_ARM_Periph_Num						1
+    #endif
+    #ifndef			UART_ARM_ReMap_Num
+        #define		UART_ARM_ReMap_Num						0
+    #endif
+    //===========================================================
+
+
+
+    //Tx与Rx引脚
+    #if		UART_ARM_Periph_Num	==	1
+        //1号串口
+        #define 			UART_ARM_Periph	     		USART1
+        #define 			UART_ARM_IRQ_Handler	    USART1_IRQHandler
+        #define				UART_ARM_IRQ				USART1_IRQn
+        #define 			UART_ARM_RccOpen()   		RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1,ENABLE)
+        #if		UART_ARM_ReMap_Num	==	0
+            //1号串口不映射,使用PA8,PA9
+            #define			UART_ARM_Tx_Port			GPIOA
+            #define			UART_ARM_Tx_Line			GPIO_Pin_9
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOA
+            #define			UART_ARM_Rx_Line			GPIO_Pin_10
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE)
+            #define			UART_ARM_Remap()
+        #elif	UART_ARM_ReMap_Num	==	1
+            //1号串映射到 PB6,PB7
+            #define			UART_ARM_Tx_Port			GPIOB
+            #define			UART_ARM_Tx_Line			GPIO_Pin_6
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOB
+            #define			UART_ARM_Rx_Line			GPIO_Pin_7
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)
+            #define			UART_ARM_Remap()			GPIO_PinRemapConfig(GPIO_Remap_USART1, ENABLE)
+        #endif
+    #elif	UART_ARM_Periph_Num	==	2
+        //2号串口
+        #define 			UART_ARM_Periph	     		USART2
+        #define 			UART_ARM_IRQ_Handler		USART2_IRQHandler
+        #define				UART_ARM_IRQ				USART2_IRQn
+        #define 			UART_ARM_RccOpen()   		RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2,ENABLE)
+        #if		UART_ARM_ReMap_Num	==	0
+            //2号串口不映射,使用PA2,PA3
+            #define			UART_ARM_Tx_Port			GPIOA
+            #define			UART_ARM_Tx_Line			GPIO_Pin_2
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOA
+            #define			UART_ARM_Rx_Line			GPIO_Pin_3
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE)
+            #define			UART_ARM_Remap()
+        #elif		UART_ARM_ReMap_Num	==	1
+            //2号串映射到 PD5,PD6
+            #define			UART_ARM_Tx_Port			GPIOD
+            #define			UART_ARM_Tx_Line			GPIO_Pin_5
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOD
+            #define			UART_ARM_Rx_Line			GPIO_Pin_6
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD,ENABLE)
+            #define			UART_ARM_Remap()			GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE)
+        #endif
+    #elif	UART_ARM_Periph_Num	==	3
+        //3号串口
+        #define 			UART_ARM_Periph	     		USART3
+        #define 			UART_ARM_IRQ_Handler		USART3_IRQHandler
+        #define				UART_ARM_IRQ				USART3_IRQn
+        #define 			UART_ARM_RccOpen()   		RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3,ENABLE)
+        #if		UART_ARM_ReMap_Num	==	0
+            //3号串口不映射,使用PB10,PB11
+            #define			UART_ARM_Tx_Port			GPIOB
+            #define			UART_ARM_Tx_Line			GPIO_Pin_10
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOB
+            #define			UART_ARM_Rx_Line			GPIO_Pin_11
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE)
+            #define			UART_ARM_Remap()
+        #elif		UART_ARM_ReMap_Num	==	1
+            //3号串映射到 PC10,PC11
+            #define			UART_ARM_Tx_Port		    GPIOC
+            #define			UART_ARM_Tx_Line			GPIO_Pin_10
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOC
+            #define			UART_ARM_Rx_Line			GPIO_Pin_11
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+            #define			UART_ARM_Remap()			GPIO_PinRemapConfig(GPIO_PartialRemap_USART3, ENABLE)
+        #elif		UART_ARM_ReMap_Num	==	2
+            //3号串映射到 PD8,PD9
+            #define			UART_ARM_Tx_Port			GPIOD
+            #define			UART_ARM_Tx_Line			GPIO_Pin_8
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOD
+            #define			UART_ARM_Rx_Line			GPIO_Pin_9
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD,ENABLE)
+            #define			UART_ARM_Remap()			GPIO_PinRemapConfig(GPIO_FullRemap_USART3, ENABLE)
+        #endif
+    #elif	UART_ARM_Periph_Num	==	4
+        //4号串口
+        #define 			UART_ARM_Periph	     		UART4
+        #define 			UART_ARM_IRQ_Handler		UART4_IRQHandler
+        #define				UART_ARM_IRQ				UART4_IRQn
+        #define 			UART_ARM_RccOpen()   		RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART4,ENABLE)
+        #if		UART_ARM_ReMap_Num	==	0
+            //4号串口不映射,使用PC10,PC11
+            #define			UART_ARM_Tx_Port			GPIOC
+            #define			UART_ARM_Tx_Line			GPIO_Pin_10
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOC
+            #define			UART_ARM_Rx_Line			GPIO_Pin_11
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+            #define			UART_ARM_Remap()
+        #elif UART_ARM_ReMap_Num	==	1
+            //4号端口没有其它映射
+        #endif
+    #elif	UART_ARM_Periph_Num	==	5
+        //5号串口
+        #define 			UART_ARM_Periph	     		UART5
+        #define 			UART_ARM_IRQ_Handler		UART5_IRQHandler
+        #define				UART_ARM_IRQ				UART5_IRQn
+        #define 			UART_ARM_RccOpen()   		RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART5,ENABLE)
+        #if		UART_ARM_ReMap_Num	==	0
+            //5号串口不映射,使用PC12,PD2
+            #define			UART_ARM_Tx_Port			GPIOC
+            #define			UART_ARM_Tx_Line			GPIO_Pin_12
+            #define			UART_ARM_Tx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC,ENABLE)
+            #define			UART_ARM_Rx_Port			GPIOD
+            #define			UART_ARM_Rx_Line			GPIO_Pin_2
+            #define			UART_ARM_Rx_RccOpen()		RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD,ENABLE)
+            #define			UART_ARM_Remap()
+        #elif UART_ARM_ReMap_Num	==	1
+            //5号端口没有其它映射
+        #endif	
+    #endif
+#endif

BSP/WDG.c

@@ -0,0 +1,16 @@
+#include "WDG.h"
+
+void WDG_Init(unsigned char Prer,unsigned short Rlr)
+{
+    IWDG->KR=0X5555;      //解除寄存器保护        
+    IWDG->PR=Prer;         // 写入初始化分频值
+    IWDG->RLR=Rlr;            // 写入自动装载值
+    IWDG->KR=0XAAAA;     //开启寄存器保护
+    IWDG->KR=0XCCCC;       //启动看门狗    
+}
+
+void WDG_Feed(void)
+{
+    IWDG->KR=0XAAAA;
+}
+

BSP/WDG.h

@@ -0,0 +1,14 @@
+#ifndef __WDG_H
+#define __WDG_H
+
+    #include 		"stm32f10x.h"
+    
+    
+    extern void WDG_Init(unsigned char Prer,unsigned short Rlr);
+
+    extern void WDG_Feed(void);
+
+
+
+#endif
+

BSP/app_def.h

@@ -0,0 +1,73 @@
+//==================================================================
+//  
+//  Filename: app_def.h
+//  Description: CPU PORT FILE,
+//               RealView Microcontroller Development Kit (MDK)
+//  
+//------------------------------------------------------------------
+//  
+//  version: 
+//  data: 17:11pm, 26.Nov.2013, written by Charlie
+//  Description: 
+//  
+//------------------------------------------------------------------
+//==================================================================
+#ifndef APP_DEF_H
+#define APP_DEF_H
+
+
+//--------------------------------------------------------------
+// type definitions
+//--------------------------------------------------------------
+typedef char			C08;			/* 8 bit character					*/
+typedef signed char		S08;			/* signed  8 bit integer			*/
+typedef signed short	S16;			/* signed 16 bit integer			*/
+typedef signed int		S32;			/* signed 32 bit integer			*/
+typedef unsigned char	U08;			/* unsigned  8 bit integer			*/
+typedef unsigned short	U16;			/* unsigned 16 bit integer			*/
+typedef unsigned int	U32;			/* unsigned 32 bit integer			*/
+typedef float			F32;			/* 32 bit floating-point number		*/
+
+typedef volatile unsigned char  VU08;
+typedef volatile unsigned short VU16;
+typedef volatile unsigned int   VU32;
+
+typedef void      (*fp_prm) (U16 prm);  /* pointer to function with prm 	*/
+typedef void      (*fp_void)(void);     /* pointer to function without prm	*/
+
+//--- boolean types
+typedef int             BOOL;           /* boolean types                	*/      
+
+
+//--------------------------------------------------------------
+// frequently used names
+//--------------------------------------------------------------
+#define TRUE           (1==1)
+#define FALSE          (1!=1)
+
+
+#ifndef NULL
+	#define NULL	((void *)0)			/* NULL setting						*/
+#endif
+
+
+//--------------------------------------------------------------
+// MACRO definitions
+//--------------------------------------------------------------
+#define HI_NIBLE(value)       (U08)(((U08)(value)) >> 4)
+#define LO_NIBLE(value)       (U08)(((U08)(value)) & 0x0F)
+
+#define HI_BYTE(value)        (U08)((value) >> 8)
+#define LO_BYTE(value)        (U08)(value)
+#define TO_WORD(a,b)          (U16)(((U16)(a) << 8) + (b))
+
+#define HI_WORD(value)        (U16)((value) >> 16)
+#define LO_WORD(value)        (U16)(value)
+
+
+
+
+//==============================================================
+#endif //APP_DEF_H
+//==============================================================
+

BSP/app_msg.c

@@ -0,0 +1,327 @@
+//==================================================================
+//  
+//  Filename: app_msg.c
+//  Description: 
+//  
+//------------------------------------------------------------------
+//  
+//  version: 
+//  data: 15:28pm, 1.July.2019, written by dwd
+//  Description: 
+//  
+//------------------------------------------------------------------
+//==================================================================
+
+/*------------------------------------------------------------------------------
+ *						I N C L U D E
+ *------------------------------------------------------------------------------*/
+#include "app_def.h"
+#include "app_msg.h"
+
+
+//------------------------------------------------------------------
+// static variables
+//------------------------------------------------------------------
+static T_MSG_QUEUE s_tMsgQue[MsgQueueCnt];
+
+
+/*=======================================================
+ - Name: OSQPost
+ - DESCRIPTION: - post message to module queue.
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+void OSQPost(T_MSG_MODULE mod, U08 id, U16 prm) 
+{
+    T_MESSAGE   msg;
+    U08         enque,deque;
+    BOOL        qfull;
+
+    msg.id  = id;                                   /* get message id */
+    msg.prm = prm;                                  /* get message parameter */
+    enque   = (U08)(s_tMsgQue[mod].nEnque & 0x7f);      /* get enqueue index */
+    qfull   = (U08)(s_tMsgQue[mod].nEnque & 0x80);      /* MSB of enqueue as full flag */
+    deque   = (U08)(s_tMsgQue[mod].nDeque & 0x7f);      /* get dequeue index */
+
+    if (qfull == 0) {                               /* queue not full... */
+        s_tMsgQue[mod].Queue[enque] = msg;             /* message enqueue */
+        enque++;
+        if (enque >= QUEUE_LENGTH) {                /* avoid overflow */
+            enque = 0;
+        }
+        if (enque == deque) {                       /* queue full now */
+            qfull = TRUE;
+        }
+    }
+
+    if (qfull) {                                    /* set queue MSB as full flag */
+        enque |= 0x80;
+    }
+    s_tMsgQue[mod].nEnque = enque;
+    s_tMsgQue[mod].nDeque = deque;
+    return;
+}
+
+
+/*=======================================================
+ - Name: OSQNew
+ - DESCRIPTION: - post new message to module queue.If message
+                  already exists,change the param to new param.
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+void OSQNew(T_MSG_MODULE mod, U08 id, U16 prm) 
+{
+    T_MESSAGE   msg;
+    U08         enque,deque,i;
+    BOOL        qfull;
+
+    msg.id  = id;                                   /* get message id */
+    msg.prm = prm;                                  /* get message parameter */
+    enque   = (U08)(s_tMsgQue[mod].nEnque & 0x7f);      /* get enqueue index */
+    qfull   = (U08)(s_tMsgQue[mod].nEnque & 0x80);      /* MSB of enqueue as full flag */
+    deque   = (U08)(s_tMsgQue[mod].nDeque & 0x7f);      /* get dequeue index */
+
+    if (qfull == 0) {                               /* queue not full... */
+        i = deque;
+        while (i != enque) {                        /* findout the same message in queue */
+            if (s_tMsgQue[mod].Queue[i].id == msg.id) {/* message already exists,return... */
+                s_tMsgQue[mod].Queue[i].prm = msg.prm; /* message param change */
+                return;
+            }
+            i++;
+            if (i >= QUEUE_LENGTH) {
+                i = 0;
+            }
+        }
+
+        s_tMsgQue[mod].Queue[enque] = msg;             /* message enqueue */
+        enque++;
+        if (enque >= QUEUE_LENGTH) {                /* avoid overflow */
+            enque = 0;
+        }
+        if (enque == deque) {                       /* queue full now */
+            qfull = TRUE;
+        }
+    }
+
+    if (qfull) {                                    /* set queue MSB as full flag */
+        enque |= 0x80;
+    }
+    s_tMsgQue[mod].nEnque = enque;
+    s_tMsgQue[mod].nDeque = deque;
+    return;
+}
+
+
+/*=======================================================
+ - Name: OSQInquiry
+ - DESCRIPTION: - post new message to module queue.If message
+                  already exists,return.
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+void OSQInquery(T_MSG_MODULE mod, U08 id, U16 prm) 
+{
+    T_MESSAGE   msg;
+    U08         enque,deque,i;
+    BOOL        qfull;
+
+    msg.id  = id;                                   /* get message id */
+    msg.prm = prm;                                  /* get message parameter */
+    enque   = (U08)(s_tMsgQue[mod].nEnque & 0x7f);      /* get enqueue index */
+    qfull   = (U08)(s_tMsgQue[mod].nEnque & 0x80);      /* MSB of enqueue as full flag */
+    deque   = (U08)(s_tMsgQue[mod].nDeque & 0x7f);      /* get dequeue index */
+
+    if (qfull == 0) {                               /* queue not full... */
+        i = deque;
+        while (i != enque) {                        /* findout the same message in queue */
+            if (s_tMsgQue[mod].Queue[i].id == msg.id) {/* message already exists,return... */
+                return;
+            }
+            i++;
+            if (i >= QUEUE_LENGTH) {
+                i = 0;
+            }
+        }
+        
+        s_tMsgQue[mod].Queue[enque] = msg;             /* message enqueue */
+        enque++;
+        if (enque >= QUEUE_LENGTH) {                /* avoid overflow */
+            enque = 0;
+        }
+        if (enque == deque) {                       /* queue full now */
+            qfull = TRUE;
+        }
+    }
+
+    if (qfull) {                                    /* set queue MSB as full flag */
+        enque |= 0x80;
+    }
+    s_tMsgQue[mod].nEnque = enque;
+    s_tMsgQue[mod].nDeque = deque;
+    return;
+}
+
+
+
+/*=======================================================
+ - Name: OSQInsert
+ - DESCRIPTION: - Insert a new message at the head of queue.
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+void OSQInsert(T_MSG_MODULE mod, U08 id, U16 prm) 
+{
+    T_MESSAGE   msg;
+    U08         enque,deque;
+    BOOL        qfull;
+
+    msg.id  = id;                                   /* get message id */
+    msg.prm = prm;                                  /* get message parameter */
+    enque   = (U08)(s_tMsgQue[mod].nEnque & 0x7f);      /* get enqueue index */
+    qfull   = (U08)(s_tMsgQue[mod].nEnque & 0x80);      /* MSB of enqueue as full flag */
+    deque   = (U08)(s_tMsgQue[mod].nDeque & 0x7f);      /* get dequeue index */
+
+    if (qfull) {                                    /* drop last message if queue full */
+        if (enque == 0) {
+            enque = QUEUE_LENGTH - 1;
+        } else {
+            enque--;
+        }
+    }
+    if (deque == 0) {                               /* adjust deque pointer to last position */
+        deque = QUEUE_LENGTH - 1;
+    } else {
+        deque--;
+    }
+    s_tMsgQue[mod].Queue[deque] = msg;                 /* insert message to queue head */
+    if (enque == deque) {                           /* queue full now */
+        qfull = TRUE;
+    }
+   
+    if (qfull) {                                    /* set queue MSB as full flag */
+        enque |= 0x80;
+    }
+    s_tMsgQue[mod].nEnque = enque;
+    s_tMsgQue[mod].nDeque = deque;
+    return;
+}
+
+
+/*=======================================================
+ - Name: OSQGet
+ - DESCRIPTION: - Message dequeue from queue.
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+T_MESSAGE *OSQGet(T_MSG_MODULE mod) 
+{
+    static  T_MESSAGE   msg;
+    U08                 enque,deque;
+    BOOL                qempty;
+
+    msg.id  = NO_MSG;
+    enque   = (U08)(s_tMsgQue[mod].nEnque & 0x7f);      /* get enqueue index */
+    deque   = (U08)(s_tMsgQue[mod].nDeque & 0x7f);      /* get dequeue index */
+    qempty  = (U08)(s_tMsgQue[mod].nDeque & 0x80);      /* MSB of dequeue as empty flag */
+
+    if (qempty == 0) {                              /* queue not empty... */
+        msg = s_tMsgQue[mod].Queue[deque];             /* message dequeue */
+        deque++;
+        if (deque >= QUEUE_LENGTH) {                /* avoid overflow */
+            deque = 0;
+        }
+        if (enque == deque) {                       /* queue full now */
+            qempty = TRUE;
+        }
+    }
+
+    if (qempty) {                                   /* set queue MSB as full flag */
+        deque |= 0x80;
+    }
+    s_tMsgQue[mod].nEnque = enque;
+    s_tMsgQue[mod].nDeque = deque;
+    
+    return (&msg);
+}
+
+
+/*=======================================================
+ - Name: OSQFlush
+ - DESCRIPTION: - Flush module message queue.
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+void OSQFlush(T_MSG_MODULE mod)
+{
+    s_tMsgQue[mod].nEnque = 0x00;                      /* clear message enqueue,qfull=FALSE */
+    s_tMsgQue[mod].nDeque = 0x80;                      /* clear message dequeue,qempty = TRUE */
+}
+
+
+/*=======================================================
+ - Name: OSQInit
+ - DESCRIPTION: - Init all module queue message
+ -  
+ - Input: 
+ - Output: 
+ - 
+ - modification history
+ - --------------------
+ - 15:28pm, 1.July.2019, written by dwd
+ * --------------------
+ =======================================================*/
+void OSQInit(void)
+{
+    T_MSG_MODULE  mod;
+
+    for (mod = (T_MSG_MODULE)0; mod < MsgQueueCnt; mod++) {
+        OSQFlush(mod);
+    }
+}
+
+
+
+//--------------------------------------------------------------
+
+//==============================================================
+//			End Of File
+//==============================================================
+

BSP/app_msg.h

@@ -0,0 +1,70 @@
+//==================================================================
+//  
+//  Filename: app_msg.h
+//  Description: 
+//  
+//------------------------------------------------------------------
+//  
+//  version: 
+//  15:28pm, 1.July.2019, written by dwd
+//  Description: 
+//  
+//------------------------------------------------------------------
+//==================================================================
+#ifndef	 _APP_MSG_H_
+#define	 _APP_MSG_H_
+
+
+/*------------------------------------------------------------------------------
+ *						I N C L U D E
+ *------------------------------------------------------------------------------*/
+#include "app_def.h"
+
+/*------------------------------------------------------------------------------
+ *						D E F I N E
+ *------------------------------------------------------------------------------*/
+#define  NO_MSG         0u           /*< no message >*/
+typedef struct {
+    U08      id;                     /*< message id >*/
+    U16     prm;                    /*< message parameter >*/
+} T_MESSAGE;
+
+
+/*----------------------
+** message queue struct
+-----------------------*/
+#define  QUEUE_LENGTH           30u      /*< total queue length >*/
+typedef struct {
+    U08      nEnque;                 /*< enqueue index >*/
+    U08      nDeque;                 /*< dequeue index >*/
+    T_MESSAGE Queue[QUEUE_LENGTH];    /*< queue buffer >*/
+} T_MSG_QUEUE;
+
+
+/*----------------------
+** message module type
+-----------------------*/
+typedef enum {
+    ArmMsgQueue             		= 0x00, 
+    BusMsgQueue           	 		= 0x01, 
+    KeyMsgQueue             		= 0x02,     
+    
+    MsgQueueCnt             		= 0x03  
+} T_MSG_MODULE;
+
+
+/*------------------------------------------------------------------------------
+ *						P R O T O T Y P E
+ *------------------------------------------------------------------------------*/
+void OSQPost(T_MSG_MODULE mod, U08 id, U16 prm);
+void OSQNew(T_MSG_MODULE mod, U08 id, U16 prm);
+void OSQInquery(T_MSG_MODULE mod, U08 id, U16 prm);
+void OSQInsert(T_MSG_MODULE mod, U08 id, U16 prm);
+T_MESSAGE *OSQGet(T_MSG_MODULE mod);
+void OSQFlush(T_MSG_MODULE mod);
+void OSQInit(void);
+
+
+/*------------------------------- E O F ----------------------------------------*/
+#endif /* _APP_MSG_H_		*/
+

Box.build_log.htm

@@ -0,0 +1,103 @@
+<html>
+<body>
+<pre>
+<h1>礦ision Build Log</h1>
+<h2>Project:</h2>
+D:\维鼎\模拟分机\Box\Box.uvproj
+Project File Date:  02/01/2018
+
+<h2>Output:</h2>
+Build target 'Target 1'
+compiling misc.c...
+compiling stm32f10x_adc.c...
+compiling stm32f10x_bkp.c...
+compiling stm32f10x_can.c...
+compiling stm32f10x_cec.c...
+compiling stm32f10x_crc.c...
+compiling stm32f10x_dac.c...
+compiling stm32f10x_dbgmcu.c...
+compiling stm32f10x_dma.c...
+compiling stm32f10x_exti.c...
+compiling stm32f10x_flash.c...
+compiling stm32f10x_fsmc.c...
+compiling stm32f10x_gpio.c...
+compiling stm32f10x_i2c.c...
+compiling stm32f10x_iwdg.c...
+compiling stm32f10x_pwr.c...
+compiling stm32f10x_rcc.c...
+compiling stm32f10x_rtc.c...
+compiling stm32f10x_sdio.c...
+compiling stm32f10x_spi.c...
+compiling stm32f10x_tim.c...
+compiling stm32f10x_usart.c...
+compiling stm32f10x_wwdg.c...
+compiling system_stm32f10x.c...
+compiling BSP.c...
+BSP\BSP.h(11): warning:  #1-D: last line of file ends without a newline
+  #endif    
+BSP\TIM1_CAP.h(10): warning:  #1-D: last line of file ends without a newline
+   #endif
+BSP\BSP.c: 2 warnings, 0 errors
+compiling GPIO_Audio.c...
+BSP\GPIO_Audio.c(31): warning:  #1-D: last line of file ends without a newline
+  }
+BSP\GPIO_Audio.c: 1 warning, 0 errors
+compiling TIM1_CAP.c...
+BSP\TIM1_CAP.h(10): warning:  #1-D: last line of file ends without a newline
+   #endif
+BSP\TIM1_CAP.c(9): warning:  #177-D: variable "TIM1_cc_flag" was declared but never referenced
+  static unsigned char TIM1_cc_flag=0;            
+BSP\TIM1_CAP.c(10): warning:  #177-D: variable "TIM1_Rev_Buf" was declared but never referenced
+  static unsigned char TIM1_Rev_Buf[3]={0};
+BSP\TIM1_CAP.c(204): warning:  #550-D: variable "CC4" was set but never used
+      static unsigned short CC4[100],CCindex=0;
+BSP\TIM1_CAP.c: 4 warnings, 0 errors
+compiling TIM6_1MS.c...
+compiling UART_ARM.c...
+BSP\UART_ARM.c(141): warning:  #1-D: last line of file ends without a newline
+  }
+BSP\UART_ARM.c: 1 warning, 0 errors
+compiling Main.c...
+.\BSP\BSP.h(11): warning:  #1-D: last line of file ends without a newline
+  #endif    
+.\BSP\TIM1_CAP.h(10): warning:  #1-D: last line of file ends without a newline
+   #endif
+User\Main.c: 2 warnings, 0 errors
+linking...
+Program Size: Code=9656 RO-data=368 RW-data=112 ZI-data=4880  
+FromELF: creating hex file...
+".\Object\Box.axf" - 0 Error(s), 10 Warning(s).
+Load "D:\\维鼎\\模拟分机\\Box\\Object\\Box.axf" 
+Set JLink Project File to "D:\维鼎\模拟分机\Box\JLinkSettings.ini"
+* JLink Info: Device "STM32F105RB" selected (128 KB flash, 32 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.80g, compiled Feb 13 2014 20:50:02
+Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
+Hardware: V8.00
+S/N : 17935099 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+* JLink Info: ETM fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F105RB
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 0, TMS: 1, TRES: 1, TRST: 0
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.

Box.uvopt

@@ -0,0 +1,949 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>Target 1</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>8000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\Object\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <Books>
+        <Book>
+          <Number>0</Number>
+          <Title>7</Title>
+          <Path>DATASHTS\ST\STM32F105</Path>
+        </Book>
+        <Book>
+          <Number>1</Number>
+          <Title>Reference Manual</Title>
+          <Path>DATASHTS\ST\STM32F10xxx.PDF</Path>
+        </Book>
+        <Book>
+          <Number>2</Number>
+          <Title>Technical Reference Manual</Title>
+          <Path>datashts\arm\cortex_m3\r1p1\DDI0337E_CORTEX_M3_R1P1_TRM.PDF</Path>
+        </Book>
+        <Book>
+          <Number>3</Number>
+          <Title>Generic User Guide</Title>
+          <Path>datashts\arm\cortex_m3\r2p1\DUI0552A_CORTEX_M3_DGUG.PDF</Path>
+        </Book>
+      </Books>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U-O206 -O206 -S3 -C0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_CL -FS08000000 -FL040000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL</Key>
+          <Name>-S</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGTARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGUARM</Key>
+          <Name>(105=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(107=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U59700618 -O78 -S2 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_CL -FS08000000 -FL020000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O14 -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7  -FN1 -FC800 -FD20000000 -FF0STM32F10x_CL -FL020000 -FS08000000</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>51</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>134230720</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>D:\VSS\STM32F105RB\脳陋禄禄掳氓\A20脳陋禄禄潞脨V5_STM32\BSP\GPIO_KEY.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression></Expression>
+        </Bp>
+      </Breakpoint>
+      <WatchWindow1>
+        <Ww>
+          <count>0</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_Rev_Buf</ItemText>
+        </Ww>
+        <Ww>
+          <count>1</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_cc_flag</ItemText>
+        </Ww>
+        <Ww>
+          <count>2</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>s_vu16I2cFM1288TaskTmr</ItemText>
+        </Ww>
+        <Ww>
+          <count>3</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>gtI2cstate</ItemText>
+        </Ww>
+        <Ww>
+          <count>4</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>u8FM1288regDate</ItemText>
+        </Ww>
+        <Ww>
+          <count>5</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>dwdcnt2</ItemText>
+        </Ww>
+        <Ww>
+          <count>6</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>RunMode</ItemText>
+        </Ww>
+        <Ww>
+          <count>7</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_WriteIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>8</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>UART_Send_WriteIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>9</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>gtI2cstate</ItemText>
+        </Ww>
+        <Ww>
+          <count>10</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_ReadIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>11</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>RunMode</ItemText>
+        </Ww>
+        <Ww>
+          <count>12</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_Buf</ItemText>
+        </Ww>
+        <Ww>
+          <count>13</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>KEY</ItemText>
+        </Ww>
+        <Ww>
+          <count>14</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>fm1288_phonevol</ItemText>
+        </Ww>
+      </WatchWindow1>
+      <MemoryWindow1>
+        <Mm>
+          <WinNumber>1</WinNumber>
+          <SubType>8</SubType>
+          <ItemText>pInfo</ItemText>
+          <AccSizeX>0</AccSizeX>
+        </Mm>
+      </MemoryWindow1>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>1</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <SystemViewers>
+        <Entry>
+          <Name>System Viewer\GPIOA</Name>
+          <WinId>35905</WinId>
+        </Entry>
+        <Entry>
+          <Name>System Viewer\GPIOB</Name>
+          <WinId>35902</WinId>
+        </Entry>
+        <Entry>
+          <Name>System Viewer\GPIOC</Name>
+          <WinId>35901</WinId>
+        </Entry>
+        <Entry>
+          <Name>System Viewer\GPIOD</Name>
+          <WinId>35904</WinId>
+        </Entry>
+        <Entry>
+          <Name>System Viewer\TIM6</Name>
+          <WinId>35903</WinId>
+        </Entry>
+      </SystemViewers>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Libraries</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</PathWithFileName>
+      <FilenameWithoutPath>misc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_adc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_bkp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_can.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>5</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_cec.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_cec.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>6</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_crc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>7</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_dac.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>8</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_dbgmcu.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>9</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_dma.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>10</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_exti.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>11</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_flash.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>12</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_fsmc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>13</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>14</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_i2c.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>15</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_iwdg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>16</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_pwr.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>17</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_rcc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>18</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_rtc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>19</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_sdio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>20</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_spi.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>21</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_tim.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>22</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>23</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_wwdg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>CISS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>24</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\system_stm32f10x.c</PathWithFileName>
+      <FilenameWithoutPath>system_stm32f10x.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>25</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_cl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_cl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>26</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_hd.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>27</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd_vl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_hd_vl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>28</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_ld.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>29</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld_vl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_ld_vl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>30</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_md.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>31</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md_vl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_md_vl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>32</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_xl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_xl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>BSP</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>33</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\BSP.c</PathWithFileName>
+      <FilenameWithoutPath>BSP.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>34</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_Audio.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_Audio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>35</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\TIM1_CAP.c</PathWithFileName>
+      <FilenameWithoutPath>TIM1_CAP.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>36</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\TIM6_1MS.c</PathWithFileName>
+      <FilenameWithoutPath>TIM6_1MS.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>37</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\UART_ARM.c</PathWithFileName>
+      <FilenameWithoutPath>UART_ARM.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>38</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_LED.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_LED.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>39</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\WDG.c</PathWithFileName>
+      <FilenameWithoutPath>WDG.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>40</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_SYS.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_SYS.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>41</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_NET.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_NET.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>42</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_FM1288.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_FM1288.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>43</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_KEY.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_KEY.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>44</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\app_msg.c</PathWithFileName>
+      <FilenameWithoutPath>app_msg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>45</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_IIC_Drv.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_IIC_Drv.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>46</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\IIC_FM1288.c</PathWithFileName>
+      <FilenameWithoutPath>IIC_FM1288.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>User</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>47</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\User\Main.c</PathWithFileName>
+      <FilenameWithoutPath>Main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+</ProjectOpt>

Box.uvoptx

@@ -0,0 +1,962 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>Target 1</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\Object\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_CL -FS08000000 -FL080000 -FP0($$Device:STM32F105RB$Flash\STM32F10x_CL.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U54FF73067871515449310767 -O206 -S1 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO131090 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_CL.FLM -FS08000000 -FL040000 -FP0($$Device:STM32F105RB$Flash\STM32F10x_CL.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL</Key>
+          <Name>-S</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGTARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGUARM</Key>
+          <Name>(105=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <WatchWindow1>
+        <Ww>
+          <count>0</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_Rev_Buf</ItemText>
+        </Ww>
+        <Ww>
+          <count>1</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_cc_flag</ItemText>
+        </Ww>
+        <Ww>
+          <count>2</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>s_vu16I2cFM1288TaskTmr</ItemText>
+        </Ww>
+        <Ww>
+          <count>3</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>gtI2cstate</ItemText>
+        </Ww>
+        <Ww>
+          <count>4</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>u8FM1288regDate</ItemText>
+        </Ww>
+        <Ww>
+          <count>5</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>dwdcnt2</ItemText>
+        </Ww>
+        <Ww>
+          <count>6</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>RunMode</ItemText>
+        </Ww>
+        <Ww>
+          <count>7</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_WriteIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>8</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>UART_Send_WriteIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>9</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>gtI2cstate</ItemText>
+        </Ww>
+        <Ww>
+          <count>10</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_ReadIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>11</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>RunMode</ItemText>
+        </Ww>
+        <Ww>
+          <count>12</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_Buf</ItemText>
+        </Ww>
+        <Ww>
+          <count>13</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>KEY</ItemText>
+        </Ww>
+        <Ww>
+          <count>14</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>fm1288_phonevol</ItemText>
+        </Ww>
+        <Ww>
+          <count>15</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>linesum</ItemText>
+        </Ww>
+        <Ww>
+          <count>16</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_Rev_Buf</ItemText>
+        </Ww>
+        <Ww>
+          <count>17</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_CC3</ItemText>
+        </Ww>
+        <Ww>
+          <count>18</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BUS_Rev_ReadIndex</ItemText>
+        </Ww>
+        <Ww>
+          <count>19</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>pInfo[7]</ItemText>
+        </Ww>
+        <Ww>
+          <count>20</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>u8test0728</ItemText>
+        </Ww>
+        <Ww>
+          <count>21</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>gfxq_cmd</ItemText>
+        </Ww>
+        <Ww>
+          <count>22</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>pInfo</ItemText>
+        </Ww>
+        <Ww>
+          <count>23</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>utest</ItemText>
+        </Ww>
+        <Ww>
+          <count>24</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>itestCC4date</ItemText>
+        </Ww>
+        <Ww>
+          <count>25</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>SendBufFX</ItemText>
+        </Ww>
+        <Ww>
+          <count>26</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>TIM1_Rev_Buf</ItemText>
+        </Ww>
+      </WatchWindow1>
+      <MemoryWindow1>
+        <Mm>
+          <WinNumber>1</WinNumber>
+          <SubType>8</SubType>
+          <ItemText>pInfo</ItemText>
+          <AccSizeX>0</AccSizeX>
+        </Mm>
+      </MemoryWindow1>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>1</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Libraries</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</PathWithFileName>
+      <FilenameWithoutPath>misc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_adc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_bkp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_can.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>5</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_cec.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_cec.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>6</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_crc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>7</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_dac.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>8</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_dbgmcu.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>9</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_dma.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>10</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_exti.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>11</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_flash.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>12</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_fsmc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>13</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>14</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_i2c.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>15</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_iwdg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>16</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_pwr.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>17</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_rcc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>18</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_rtc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>19</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_sdio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>20</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_spi.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>21</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_tim.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>22</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>23</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f10x_wwdg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>CISS</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>24</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\system_stm32f10x.c</PathWithFileName>
+      <FilenameWithoutPath>system_stm32f10x.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>25</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_cl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_cl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>26</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_hd.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>27</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd_vl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_hd_vl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>28</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_ld.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>29</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld_vl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_ld_vl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>30</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_md.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>31</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md_vl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_md_vl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>32</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_xl.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f10x_xl.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>BSP</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>33</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\BSP.c</PathWithFileName>
+      <FilenameWithoutPath>BSP.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>34</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_Audio.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_Audio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>35</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\TIM1_CAP.c</PathWithFileName>
+      <FilenameWithoutPath>TIM1_CAP.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>36</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\TIM6_1MS.c</PathWithFileName>
+      <FilenameWithoutPath>TIM6_1MS.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>37</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\UART_ARM.c</PathWithFileName>
+      <FilenameWithoutPath>UART_ARM.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>38</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_LED.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_LED.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>39</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\WDG.c</PathWithFileName>
+      <FilenameWithoutPath>WDG.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>40</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_SYS.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_SYS.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>41</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_NET.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_NET.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>42</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_FM1288.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_FM1288.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>43</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_KEY.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_KEY.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>44</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\app_msg.c</PathWithFileName>
+      <FilenameWithoutPath>app_msg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>45</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\GPIO_IIC_Drv.c</PathWithFileName>
+      <FilenameWithoutPath>GPIO_IIC_Drv.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>46</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\BSP\IIC_FM1288.c</PathWithFileName>
+      <FilenameWithoutPath>IIC_FM1288.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>User</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>47</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>1</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\User\Main.c</PathWithFileName>
+      <FilenameWithoutPath>Main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

Box.uvproj.saved_uv4

@@ -0,0 +1,946 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>Target 1</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F105RB</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x801FFFF) CLOCK(25000000) CPUTYPE("Cortex-M3")</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>"STARTUP\ST\STM32F10x\startup_stm32f10x_cl.s" ("STM32 Connectivity Line Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_CL -FS08000000 -FL020000)</FlashDriverDll>
+          <DeviceId>4884</DeviceId>
+          <RegisterFile>stm32f10x.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\ST\STM32F1xx\STM32F105xx.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath>ST\STM32F10x\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F10x\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\Object\</OutputDirectory>
+          <OutputName>Box</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\Object\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>1</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4104</DriverSelection>
+          </Flash1>
+          <bUseTDR>0</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M3"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>0</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>0</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>USE_STDPERIPH_DRIVER,STM32F10X_CL</Define>
+              <Undefine></Undefine>
+              <IncludePath>.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\BSP;.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x;.\User</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Libraries</GroupName>
+          <Files>
+            <File>
+              <FileName>misc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_bkp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_cec.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dbgmcu.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_exti.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_flash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_fsmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_iwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_sdio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_wwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CISS</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f10x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\system_stm32f10x.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_cl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_cl.s</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_hd.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_hd_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_ld.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_ld_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_md.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_md_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_xl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_xl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>BSP</GroupName>
+          <Files>
+            <File>
+              <FileName>BSP.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\BSP.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_Audio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_Audio.c</FilePath>
+            </File>
+            <File>
+              <FileName>TIM1_CAP.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\TIM1_CAP.c</FilePath>
+            </File>
+            <File>
+              <FileName>TIM6_1MS.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\TIM6_1MS.c</FilePath>
+            </File>
+            <File>
+              <FileName>UART_ARM.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\UART_ARM.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_LED.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_LED.c</FilePath>
+            </File>
+            <File>
+              <FileName>WDG.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\WDG.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_SYS.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_SYS.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_NET.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_NET.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_FM1288.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_FM1288.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_KEY.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_KEY.c</FilePath>
+            </File>
+            <File>
+              <FileName>app_msg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\app_msg.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_IIC_Drv.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_IIC_Drv.c</FilePath>
+            </File>
+            <File>
+              <FileName>IIC_FM1288.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\IIC_FM1288.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>User</GroupName>
+          <Files>
+            <File>
+              <FileName>Main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\User\Main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+</Project>

Box.uvprojx

@@ -0,0 +1,922 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>Target 1</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F105RB</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F1xx_DFP.2.4.1</PackID>
+          <PackURL>https://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x10000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_CL -FS08000000 -FL080000 -FP0($$Device:STM32F105RB$Flash\STM32F10x_CL.FLM))</FlashDriverDll>
+          <DeviceId>4884</DeviceId>
+          <RegisterFile>$$Device:STM32F105RB$Device\Include\stm32f10x.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F105RB$SVD\STM32F105xx.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\Object\</OutputDirectory>
+          <OutputName>Box</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\Object\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4104</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M3"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>0</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>0</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>USE_STDPERIPH_DRIVER,STM32F10X_CL</Define>
+              <Undefine></Undefine>
+              <IncludePath>.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\BSP;.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x;.\User</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Libraries</GroupName>
+          <Files>
+            <File>
+              <FileName>misc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_bkp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_cec.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dbgmcu.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_exti.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_flash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_fsmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_iwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_sdio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_wwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CISS</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f10x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\system_stm32f10x.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_cl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_cl.s</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_hd.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_hd_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_ld.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_ld_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_md.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_md_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_xl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_xl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>BSP</GroupName>
+          <Files>
+            <File>
+              <FileName>BSP.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\BSP.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_Audio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_Audio.c</FilePath>
+            </File>
+            <File>
+              <FileName>TIM1_CAP.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\TIM1_CAP.c</FilePath>
+            </File>
+            <File>
+              <FileName>TIM6_1MS.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\TIM6_1MS.c</FilePath>
+            </File>
+            <File>
+              <FileName>UART_ARM.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\UART_ARM.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_LED.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_LED.c</FilePath>
+            </File>
+            <File>
+              <FileName>WDG.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\WDG.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_SYS.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_SYS.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_NET.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_NET.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_FM1288.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_FM1288.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_KEY.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_KEY.c</FilePath>
+            </File>
+            <File>
+              <FileName>app_msg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\app_msg.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_IIC_Drv.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_IIC_Drv.c</FilePath>
+            </File>
+            <File>
+              <FileName>IIC_FM1288.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\IIC_FM1288.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>User</GroupName>
+          <Files>
+            <File>
+              <FileName>Main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\User\Main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>::CMSIS</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.3.0" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.6.0"/>
+        <targetInfos>
+          <targetInfo name="Target 1"/>
+        </targetInfos>
+      </component>
+    </components>
+    <files/>
+  </RTE>
+
+</Project>

Box_uvproj.bak

@@ -0,0 +1,946 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>Target 1</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F105RB</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x801FFFF) CLOCK(25000000) CPUTYPE("Cortex-M3")</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>"STARTUP\ST\STM32F10x\startup_stm32f10x_cl.s" ("STM32 Connectivity Line Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_CL -FS08000000 -FL020000)</FlashDriverDll>
+          <DeviceId>4884</DeviceId>
+          <RegisterFile>stm32f10x.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\ST\STM32F1xx\STM32F105xx.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath>ST\STM32F10x\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F10x\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\Object\</OutputDirectory>
+          <OutputName>Box</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\Object\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>1</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4104</DriverSelection>
+          </Flash1>
+          <bUseTDR>0</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M3"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>0</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>0</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>USE_STDPERIPH_DRIVER,STM32F10X_CL</Define>
+              <Undefine></Undefine>
+              <IncludePath>.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\BSP;.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x;.\User</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Libraries</GroupName>
+          <Files>
+            <File>
+              <FileName>misc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_bkp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_cec.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dbgmcu.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_exti.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_flash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_fsmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_iwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_sdio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f10x_wwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CISS</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f10x.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\system_stm32f10x.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_cl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_cl.s</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_hd.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_hd_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_hd_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_ld.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_ld_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_ld_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_md.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_md_vl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_md_vl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+            <File>
+              <FileName>startup_stm32f10x_xl.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>.\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\startup\arm\startup_stm32f10x_xl.s</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>0</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Aads>
+                    <interw>2</interw>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <thumb>2</thumb>
+                    <SplitLS>2</SplitLS>
+                    <SwStkChk>2</SwStkChk>
+                    <NoWarn>2</NoWarn>
+                    <uSurpInc>2</uSurpInc>
+                    <useXO>2</useXO>
+                    <uClangAs>2</uClangAs>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Aads>
+                </FileArmAds>
+              </FileOption>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>BSP</GroupName>
+          <Files>
+            <File>
+              <FileName>BSP.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\BSP.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_Audio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_Audio.c</FilePath>
+            </File>
+            <File>
+              <FileName>TIM1_CAP.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\TIM1_CAP.c</FilePath>
+            </File>
+            <File>
+              <FileName>TIM6_1MS.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\TIM6_1MS.c</FilePath>
+            </File>
+            <File>
+              <FileName>UART_ARM.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\UART_ARM.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_LED.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_LED.c</FilePath>
+            </File>
+            <File>
+              <FileName>WDG.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\WDG.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_SYS.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_SYS.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_NET.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_NET.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_FM1288.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_FM1288.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_KEY.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_KEY.c</FilePath>
+            </File>
+            <File>
+              <FileName>app_msg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\app_msg.c</FilePath>
+            </File>
+            <File>
+              <FileName>GPIO_IIC_Drv.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\GPIO_IIC_Drv.c</FilePath>
+            </File>
+            <File>
+              <FileName>IIC_FM1288.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\BSP\IIC_FM1288.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>User</GroupName>
+          <Files>
+            <File>
+              <FileName>Main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>.\User\Main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+</Project>

DebugConfig/Target_1_STM32F105RB_1.0.0.dbgconf

@@ -0,0 +1,97 @@
+// <<< Use Configuration Wizard in Context Menu >>>
+// <h> Debug MCU Configuration
+//   <o0.0>    DBG_SLEEP
+// <i> Debug Sleep Mode
+// <i> 0: (FCLK=On, HCLK=Off) FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled
+// <i> 1: (FCLK=On, HCLK=On) HCLK is fed by the same clock that is provided to FCLK
+//   <o0.1>    DBG_STOP
+// <i> Debug Stop Mode
+// <i> 0: (FCLK=Off, HCLK=Off) Clock controller disables all clocks
+// <i> 1: (FCLK=On, HCLK=On) FCLK and HCLK are provided by the internal RC oscillator which remains active
+//   <o0.2>    DBG_STANDBY
+// <i> Debug Standby Mode
+// <i> 0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
+// <i> 1: (FCLK=On, HCLK=On) Digital part is powered and FCLK and HCLK are provided by the internal RC oscillator which remains active
+//   <o0.8>    DBG_IWDG_STOP
+// <i> Debug independent watchdog stopped when core is halted
+// <i> 0: The watchdog counter clock continues even if the core is halted
+// <i> 1: The watchdog counter clock is stopped when the core is halted
+//   <o0.9>    DBG_WWDG_STOP
+// <i> Debug window watchdog stopped when core is halted
+// <i> 0: The window watchdog counter clock continues even if the core is halted
+// <i> 1: The window watchdog counter clock is stopped when the core is halted
+//   <o0.10>   DBG_TIM1_STOP
+// <i> Timer 1 counter stopped when core is halted
+// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
+// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
+//   <o0.11>   DBG_TIM2_STOP
+// <i> Timer 2 counter stopped when core is halted
+// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
+// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
+//   <o0.12>   DBG_TIM3_STOP
+// <i> Timer 3 counter stopped when core is halted
+// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
+// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
+//   <o0.13>   DBG_TIM4_STOP
+// <i> Timer 4 counter stopped when core is halted
+// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
+// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
+//   <o0.14>   DBG_CAN1_STOP
+// <i> Debug CAN1 stopped when Core is halted
+// <i> 0: Same behavior as in normal mode
+// <i> 1: CAN1 receive registers are frozen
+//   <o0.15>   DBG_I2C1_SMBUS_TIMEOUT
+// <i> I2C1 SMBUS timeout mode stopped when Core is halted
+// <i> 0: Same behavior as in normal mode
+// <i> 1: The SMBUS timeout is frozen
+//   <o0.16>   DBG_I2C2_SMBUS_TIMEOUT
+// <i> I2C2 SMBUS timeout mode stopped when Core is halted
+// <i> 0: Same behavior as in normal mode
+// <i> 1: The SMBUS timeout is frozen
+//   <o0.17>   DBG_TIM8_STOP
+// <i> Timer 8 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.18>   DBG_TIM5_STOP
+// <i> Timer 5 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.19>   DBG_TIM6_STOP
+// <i> Timer 6 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.20>   DBG_TIM7_STOP
+// <i> Timer 7 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.21>   DBG_CAN2_STOP
+// <i> Debug CAN2 stopped when Core is halted
+// <i> 0: Same behavior as in normal mode
+// <i> 1: CAN2 receive registers are frozen
+//   <o0.25>   DBG_TIM12_STOP
+// <i> Timer 12 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.26>   DBG_TIM13_STOP
+// <i> Timer 13 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.27>   DBG_TIM14_STOP
+// <i> Timer 14 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.28>   DBG_TIM9_STOP
+// <i> Timer 9 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.29>   DBG_TIM10_STOP
+// <i> Timer 10 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//   <o0.30>   DBG_TIM11_STOP
+// <i> Timer 11 counter stopped when core is halted
+// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+// </h>
+DbgMCU_CR = 0x00000007;
+// <<< end of configuration section >>>

EventRecorderStub.scvd

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<component_viewer schemaVersion="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="Component_Viewer.xsd">
+
+<component name="EventRecorderStub" version="1.0.0"/>       <!--name and version of the component-->
+  <events>
+  </events>
+
+</component_viewer>

JLinkSettings.ini

@@ -0,0 +1,34 @@
+[BREAKPOINTS]
+ShowInfoWin = 1
+EnableFlashBP = 2
+BPDuringExecution = 0
+[CFI]
+CFISize = 0x00
+CFIAddr = 0x00
+[CPU]
+OverrideMemMap = 0
+AllowSimulation = 1
+ScriptFile=""
+[FLASH]
+CacheExcludeSize = 0x00
+CacheExcludeAddr = 0x00
+MinNumBytesFlashDL = 0
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="UNSPECIFIED"
+[GENERAL]
+WorkRAMSize = 0x00
+WorkRAMAddr = 0x00
+RAMUsageLimit = 0x00
+[SWO]
+SWOLogFile=""
+[MEM]
+RdOverrideOrMask = 0x00
+RdOverrideAndMask = 0xFFFFFFFF
+RdOverrideAddr = 0xFFFFFFFF
+WrOverrideOrMask = 0x00
+WrOverrideAndMask = 0xFFFFFFFF
+WrOverrideAddr = 0xFFFFFFFF

Libraries/CMSIS/CM3/CoreSupport/core_cm3.c

@@ -0,0 +1,784 @@
+/**************************************************************************//**
+ * @file     core_cm3.c
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Source File
+ * @version  V1.30
+ * @date     30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M 
+ * processor based microcontrollers.  This file can be freely distributed 
+ * within development tools that are supporting such ARM based processors. 
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#include <stdint.h>
+
+/* define compiler specific symbols */
+#if defined ( __CC_ARM   )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+
+#elif defined ( __ICCARM__ )
+  #define __ASM           __asm                                       /*!< asm keyword for IAR Compiler          */
+  #define __INLINE        inline                                      /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined   (  __GNUC__  )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+
+#elif defined   (  __TASKING__  )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+
+#endif
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+
+#if defined ( __CC_ARM   ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+__ASM uint32_t __get_PSP(void)
+{
+  mrs r0, psp
+  bx lr
+}
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+__ASM void __set_PSP(uint32_t topOfProcStack)
+{
+  msr psp, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+__ASM uint32_t __get_MSP(void)
+{
+  mrs r0, msp
+  bx lr
+}
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+__ASM void __set_MSP(uint32_t mainStackPointer)
+{
+  msr msp, r0
+  bx lr
+}
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param   value  value to reverse
+ * @return         reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+__ASM uint32_t __REV16(uint16_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+
+/**
+ * @brief  Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param   value  value to reverse
+ * @return         reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+__ASM int32_t __REVSH(int16_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief  Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+__ASM void __CLREX(void)
+{
+  clrex
+}
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+__ASM uint32_t  __get_BASEPRI(void)
+{
+  mrs r0, basepri
+  bx lr
+}
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+__ASM void __set_BASEPRI(uint32_t basePri)
+{
+  msr basepri, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+__ASM uint32_t __get_PRIMASK(void)
+{
+  mrs r0, primask
+  bx lr
+}
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param  priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+__ASM void __set_PRIMASK(uint32_t priMask)
+{
+  msr primask, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+__ASM uint32_t  __get_FAULTMASK(void)
+{
+  mrs r0, faultmask
+  bx lr
+}
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask  faultMask value
+ *
+ * Set the fault mask register
+ */
+__ASM void __set_FAULTMASK(uint32_t faultMask)
+{
+  msr faultmask, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Control Register value
+ * 
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+__ASM uint32_t __get_CONTROL(void)
+{
+  mrs r0, control
+  bx lr
+}
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+__ASM void __set_CONTROL(uint32_t control)
+{
+  msr control, r0
+  bx lr
+}
+
+#endif /* __ARMCC_VERSION  */ 
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#pragma diag_suppress=Pe940
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void)
+{
+  __ASM("mrs r0, psp");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM("msr psp, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void)
+{
+  __ASM("mrs r0, msp");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM("msr msp, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+  __ASM("rev16 r0, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Reverse bit order of value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+  __ASM("rbit r0, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  LDR Exclusive (8 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+  __ASM("ldrexb r0, [r0]");
+  __ASM("bx lr"); 
+}
+
+/**
+ * @brief  LDR Exclusive (16 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+  __ASM("ldrexh r0, [r0]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  LDR Exclusive (32 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+  __ASM("ldrex r0, [r0]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  STR Exclusive (8 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+  __ASM("strexb r0, r0, [r1]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  STR Exclusive (16 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+  __ASM("strexh r0, r0, [r1]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  STR Exclusive (32 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+  __ASM("strex r0, r0, [r1]");
+  __ASM("bx lr");
+}
+
+#pragma diag_default=Pe940
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void) __attribute__( ( naked ) );
+uint32_t __get_PSP(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, psp\n\t" 
+                  "MOV r0, %0 \n\t"
+                  "BX  lr     \n\t"  : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
+void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0\n\t"
+                  "BX  lr     \n\t" : : "r" (topOfProcStack) );
+}
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void) __attribute__( ( naked ) );
+uint32_t __get_MSP(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, msp\n\t" 
+                  "MOV r0, %0 \n\t"
+                  "BX  lr     \n\t"  : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
+void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0\n\t"
+                  "BX  lr     \n\t" : : "r" (topOfMainStack) );
+}
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+uint32_t __get_BASEPRI(void)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+void __set_BASEPRI(uint32_t value)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (value) );
+}
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+uint32_t __get_PRIMASK(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param  priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
+}
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask  faultMask value
+ *
+ * Set the fault mask register
+ */
+void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
+}
+
+/**
+ * @brief  Return the Control Register value
+* 
+*  @return Control value
+ *
+ * Return the content of the control register
+ */
+uint32_t __get_CONTROL(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) );
+}
+
+
+/**
+ * @brief  Reverse byte order in integer value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in integer value
+ */
+uint32_t __REV(uint32_t value)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+/**
+ * @brief  Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+int32_t __REVSH(int16_t value)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+/**
+ * @brief  Reverse bit order of value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result=0;
+  
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+   return(result);
+}
+
+/**
+ * @brief  LDR Exclusive (8 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+    uint8_t result=0;
+  
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
+   return(result);
+}
+
+/**
+ * @brief  LDR Exclusive (16 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+    uint16_t result=0;
+  
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
+   return(result);
+}
+
+/**
+ * @brief  LDR Exclusive (32 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+    uint32_t result=0;
+  
+   __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
+   return(result);
+}
+
+/**
+ * @brief  STR Exclusive (8 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+   uint32_t result=0;
+  
+   __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+   return(result);
+}
+
+/**
+ * @brief  STR Exclusive (16 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+   uint32_t result=0;
+  
+   __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+   return(result);
+}
+
+/**
+ * @brief  STR Exclusive (32 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+   uint32_t result=0;
+  
+   __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+   return(result);
+}
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s

@@ -0,0 +1,473 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_cl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Connectivity line Devices vector table for Atollic
+  *            toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR
+  *                  address.
+  *                - Configure the clock system
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+  	bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+  .word CAN1_TX_IRQHandler
+  .word CAN1_RX0_IRQHandler
+ 	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+	.word	TIM1_TRG_COM_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	OTG_FS_WKUP_IRQHandler
+  .word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_IRQHandler
+  .word TIM7_IRQHandler
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word ETH_IRQHandler
+  .word ETH_WKUP_IRQHandler
+  .word CAN2_TX_IRQHandler
+  .word CAN2_RX0_IRQHandler
+  .word CAN2_RX1_IRQHandler
+  .word CAN2_SCE_IRQHandler
+  .word OTG_FS_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word BootRAM     /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	CAN1_TX_IRQHandler
+	.thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX0_IRQHandler
+	.thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	OTG_FS_WKUP_IRQHandler
+	.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+	.weak	TIM5_IRQHandler
+	.thumb_set TIM5_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_IRQHandler
+	.thumb_set TIM6_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	ETH_IRQHandler
+	.thumb_set ETH_IRQHandler,Default_Handler
+
+	.weak	ETH_WKUP_IRQHandler
+	.thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+	.weak	CAN2_TX_IRQHandler
+	.thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+	.weak	CAN2_RX0_IRQHandler
+	.thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN2_RX1_IRQHandler
+	.thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN2_SCE_IRQHandler
+	.thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+	.weak	OTG_FS_IRQHandler
+	.thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s

@@ -0,0 +1,469 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_hd.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x High Density Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Configure external SRAM mounted on STM3210E-EVAL board
+  *                  to be used as data memory (optional, to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+    .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN1_TX_IRQHandler
+	.word	USB_LP_CAN1_RX0_IRQHandler
+	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+	.word	TIM1_TRG_COM_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	TIM8_BRK_IRQHandler
+	.word	TIM8_UP_IRQHandler
+	.word	TIM8_TRG_COM_IRQHandler
+	.word	TIM8_CC_IRQHandler
+	.word	ADC3_IRQHandler
+	.word	FSMC_IRQHandler
+	.word	SDIO_IRQHandler
+	.word	TIM5_IRQHandler
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_5_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	BootRAM       /* @0x1E0. This is for boot in RAM mode for
+                         STM32F10x High Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN1_TX_IRQHandler
+	.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN1_RX0_IRQHandler
+	.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	TIM8_BRK_IRQHandler
+	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM8_UP_IRQHandler
+	.thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+	.weak	TIM8_TRG_COM_IRQHandler
+	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM8_CC_IRQHandler
+	.thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+	.weak	ADC3_IRQHandler
+	.thumb_set ADC3_IRQHandler,Default_Handler
+
+	.weak	FSMC_IRQHandler
+	.thumb_set FSMC_IRQHandler,Default_Handler
+
+	.weak	SDIO_IRQHandler
+	.thumb_set SDIO_IRQHandler,Default_Handler
+
+	.weak	TIM5_IRQHandler
+	.thumb_set TIM5_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_IRQHandler
+	.thumb_set TIM6_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_5_IRQHandler
+	.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s

@@ -0,0 +1,451 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_hd_vl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x High Density Value Line Devices vector table for Atollic 
+  *            toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system  
+  *                - Configure external SRAM mounted on STM32100E-EVAL board
+  *                  to be used as data memory (optional, to be enabled by user)   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+	
+/* Call the clock system intitialization function.*/
+  bl  SystemInit 
+/* Call static constructors */
+  bl __libc_init_array  
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	CEC_IRQHandler
+  .word TIM12_IRQHandler
+  .word TIM13_IRQHandler
+  .word TIM14_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word TIM5_IRQHandler
+  .word SPI3_IRQHandler
+  .word UART4_IRQHandler
+  .word UART5_IRQHandler
+  .word TIM6_DAC_IRQHandler
+  .word TIM7_IRQHandler  
+  .word DMA2_Channel1_IRQHandler
+  .word DMA2_Channel2_IRQHandler
+  .word DMA2_Channel3_IRQHandler
+  .word DMA2_Channel4_5_IRQHandler
+  .word DMA2_Channel5_IRQHandler
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word 0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x High Density Value line devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM12_IRQHandler
+  .thumb_set TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM13_IRQHandler
+  .thumb_set TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+  
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler 
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler  
+
+  .weak  DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+  
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s

@@ -0,0 +1,347 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_ld.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Low Density Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address.
+  *                - Configure the clock system 
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN1_TX_IRQHandler
+	.word	USB_LP_CAN1_RX0_IRQHandler
+	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+  .word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN1_TX_IRQHandler
+	.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN1_RX0_IRQHandler
+	.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s

@@ -0,0 +1,392 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_ld_vl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit  
+/* Call static constructors */
+  bl __libc_init_array 
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI1_IRQHandler
+	.word	0
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	0
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	CEC_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word 0  
+	.word 0
+	.word 0
+	.word 0
+	.word TIM6_DAC_IRQHandler
+	.word TIM7_IRQHandler  
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word BootRAM          /* @0x01CC. This is for boot in RAM mode for 
+                            STM32F10x Medium Value Line Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler  
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s

@@ -0,0 +1,363 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_md.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Medium Density Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN1_TX_IRQHandler
+	.word	USB_LP_CAN1_RX0_IRQHandler
+	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+	.word	TIM1_TRG_COM_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+  .word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	BootRAM          /* @0x108. This is for boot in RAM mode for
+                            STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN1_TX_IRQHandler
+	.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN1_RX0_IRQHandler
+	.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s

@@ -0,0 +1,408 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_md_vl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Medium Density Value Line Devices vector table for Atollic 
+  *            toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system   
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+	
+/* Call the clock system intitialization function.*/
+  bl  SystemInit 
+/* Call static constructors */
+  bl __libc_init_array  
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	CEC_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word 0  
+	.word 0
+	.word 0
+	.word 0
+	.word TIM6_DAC_IRQHandler
+	.word TIM7_IRQHandler  
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word 0
+	.word BootRAM          /* @0x01CC. This is for boot in RAM mode for 
+                         STM32F10x Medium Value Line Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler  
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s

@@ -0,0 +1,467 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_xl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system and the external SRAM mounted on 
+  *                  STM3210E-EVAL board to be used as data memory (optional, 
+  *                  to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  USB_HP_CAN1_TX_IRQHandler
+  .word  USB_LP_CAN1_RX0_IRQHandler
+  .word  CAN1_RX1_IRQHandler
+  .word  CAN1_SCE_IRQHandler
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM9_IRQHandler
+  .word  TIM1_UP_TIM10_IRQHandler
+  .word  TIM1_TRG_COM_TIM11_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  USBWakeUp_IRQHandler
+  .word  TIM8_BRK_TIM12_IRQHandler
+  .word  TIM8_UP_TIM13_IRQHandler
+  .word  TIM8_TRG_COM_TIM14_IRQHandler
+  .word  TIM8_CC_IRQHandler
+  .word  ADC3_IRQHandler
+  .word  FSMC_IRQHandler
+  .word  SDIO_IRQHandler
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x XL-Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM9_IRQHandler
+  .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM10_IRQHandler
+  .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM11_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak  TIM8_BRK_TIM12_IRQHandler
+  .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM8_UP_TIM13_IRQHandler
+  .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM8_TRG_COM_TIM14_IRQHandler
+  .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak  ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s

@@ -0,0 +1,368 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_cl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Connectivity line devices vector table for MDK-ARM 
+;*                      toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1 and ADC2
+                DCD     CAN1_TX_IRQHandler         ; CAN1 TX
+                DCD     CAN1_RX0_IRQHandler        ; CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C1 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC alarm through EXTI line
+                DCD     OTG_FS_WKUP_IRQHandler     ; USB OTG FS Wakeup through EXTI line
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_IRQHandler   ; DMA2 Channel4
+                DCD     DMA2_Channel5_IRQHandler   ; DMA2 Channel5
+                DCD     ETH_IRQHandler             ; Ethernet
+                DCD     ETH_WKUP_IRQHandler        ; Ethernet Wakeup through EXTI line
+                DCD     CAN2_TX_IRQHandler         ; CAN2 TX
+                DCD     CAN2_RX0_IRQHandler        ; CAN2 RX0
+                DCD     CAN2_RX1_IRQHandler        ; CAN2 RX1
+                DCD     CAN2_SCE_IRQHandler        ; CAN2 SCE
+                DCD     OTG_FS_IRQHandler          ; USB OTG FS
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  CAN1_TX_IRQHandler         [WEAK]
+                EXPORT  CAN1_RX0_IRQHandler        [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  OTG_FS_WKUP_IRQHandler     [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel5_IRQHandler   [WEAK]
+                EXPORT  ETH_IRQHandler             [WEAK]
+                EXPORT  ETH_WKUP_IRQHandler        [WEAK]
+                EXPORT  CAN2_TX_IRQHandler         [WEAK]
+                EXPORT  CAN2_RX0_IRQHandler        [WEAK]
+                EXPORT  CAN2_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN2_SCE_IRQHandler        [WEAK]
+                EXPORT  OTG_FS_IRQHandler          [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_IRQHandler
+DMA2_Channel5_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s

@@ -0,0 +1,358 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_hd.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x High Density Devices vector table for MDK-ARM 
+;*                      toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system and also configure the external 
+;*                        SRAM mounted on STM3210E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1 & ADC2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+                DCD     TIM8_BRK_IRQHandler        ; TIM8 Break
+                DCD     TIM8_UP_IRQHandler         ; TIM8 Update
+                DCD     TIM8_TRG_COM_IRQHandler    ; TIM8 Trigger and Commutation
+                DCD     TIM8_CC_IRQHandler         ; TIM8 Capture Compare
+                DCD     ADC3_IRQHandler            ; ADC3
+                DCD     FSMC_IRQHandler            ; FSMC
+                DCD     SDIO_IRQHandler            ; SDIO
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+                EXPORT  TIM8_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM8_UP_IRQHandler         [WEAK]
+                EXPORT  TIM8_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM8_CC_IRQHandler         [WEAK]
+                EXPORT  ADC3_IRQHandler            [WEAK]
+                EXPORT  FSMC_IRQHandler            [WEAK]
+                EXPORT  SDIO_IRQHandler            [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_IRQHandler
+TIM8_UP_IRQHandler
+TIM8_TRG_COM_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s

@@ -0,0 +1,346 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_hd_vl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x High Density Value Line Devices vector table  
+;*                      for MDK-ARM toolchain.  
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system and also configure the external 
+;*                        SRAM mounted on STM32100E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp                    ; Top of Stack
+                DCD     Reset_Handler                   ; Reset Handler
+                DCD     NMI_Handler                     ; NMI Handler
+                DCD     HardFault_Handler               ; Hard Fault Handler
+                DCD     MemManage_Handler               ; MPU Fault Handler
+                DCD     BusFault_Handler                ; Bus Fault Handler
+                DCD     UsageFault_Handler              ; Usage Fault Handler
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     SVC_Handler                     ; SVCall Handler
+                DCD     DebugMon_Handler                ; Debug Monitor Handler
+                DCD     0                               ; Reserved
+                DCD     PendSV_Handler                  ; PendSV Handler
+                DCD     SysTick_Handler                 ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                 ; Window Watchdog
+                DCD     PVD_IRQHandler                  ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler               ; Tamper
+                DCD     RTC_IRQHandler                  ; RTC
+                DCD     FLASH_IRQHandler                ; Flash
+                DCD     RCC_IRQHandler                  ; RCC
+                DCD     EXTI0_IRQHandler                ; EXTI Line 0
+                DCD     EXTI1_IRQHandler                ; EXTI Line 1
+                DCD     EXTI2_IRQHandler                ; EXTI Line 2
+                DCD     EXTI3_IRQHandler                ; EXTI Line 3
+                DCD     EXTI4_IRQHandler                ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler        ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler        ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler        ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler        ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler        ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler        ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler        ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler                 ; ADC1
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     EXTI9_5_IRQHandler              ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM15_IRQHandler       ; TIM1 Break and TIM15
+                DCD     TIM1_UP_TIM16_IRQHandler        ; TIM1 Update and TIM16
+                DCD     TIM1_TRG_COM_TIM17_IRQHandler   ; TIM1 Trigger and Commutation and TIM17
+                DCD     TIM1_CC_IRQHandler              ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler                 ; TIM2
+                DCD     TIM3_IRQHandler                 ; TIM3
+                DCD     TIM4_IRQHandler                 ; TIM4
+                DCD     I2C1_EV_IRQHandler              ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler              ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler              ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler              ; I2C2 Error
+                DCD     SPI1_IRQHandler                 ; SPI1
+                DCD     SPI2_IRQHandler                 ; SPI2
+                DCD     USART1_IRQHandler               ; USART1
+                DCD     USART2_IRQHandler               ; USART2
+                DCD     USART3_IRQHandler               ; USART3
+                DCD     EXTI15_10_IRQHandler            ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler             ; RTC Alarm through EXTI Line
+                DCD     CEC_IRQHandler                  ; HDMI-CEC
+                DCD     TIM12_IRQHandler                ; TIM12
+                DCD     TIM13_IRQHandler                ; TIM13 
+                DCD     TIM14_IRQHandler                ; TIM14
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     TIM5_IRQHandler                 ; TIM5
+                DCD     SPI3_IRQHandler                 ; SPI3
+                DCD     UART4_IRQHandler                ; UART4
+                DCD     UART5_IRQHandler                ; UART5
+                DCD     TIM6_DAC_IRQHandler             ; TIM6 and DAC underrun
+                DCD     TIM7_IRQHandler                 ; TIM7
+                DCD     DMA2_Channel1_IRQHandler        ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler        ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler        ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler      ; DMA2 Channel4 & Channel5
+                DCD     DMA2_Channel5_IRQHandler        ; DMA2 Channel5                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                      [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler                [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler                [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler                 [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler               [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                      [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler                 [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                   [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                  [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                  [WEAK]
+                EXPORT  PVD_IRQHandler                   [WEAK]
+                EXPORT  TAMPER_IRQHandler                [WEAK]
+                EXPORT  RTC_IRQHandler                   [WEAK]
+                EXPORT  FLASH_IRQHandler                 [WEAK]
+                EXPORT  RCC_IRQHandler                   [WEAK]
+                EXPORT  EXTI0_IRQHandler                 [WEAK]
+                EXPORT  EXTI1_IRQHandler                 [WEAK]
+                EXPORT  EXTI2_IRQHandler                 [WEAK]
+                EXPORT  EXTI3_IRQHandler                 [WEAK]
+                EXPORT  EXTI4_IRQHandler                 [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler         [WEAK]
+                EXPORT  ADC1_IRQHandler                  [WEAK]
+                EXPORT  EXTI9_5_IRQHandler               [WEAK]
+                EXPORT  TIM1_BRK_TIM15_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_TIM16_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM17_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler               [WEAK]
+                EXPORT  TIM2_IRQHandler                  [WEAK]
+                EXPORT  TIM3_IRQHandler                  [WEAK]
+                EXPORT  TIM4_IRQHandler                  [WEAK]
+                EXPORT  I2C1_EV_IRQHandler               [WEAK]
+                EXPORT  I2C1_ER_IRQHandler               [WEAK]
+                EXPORT  I2C2_EV_IRQHandler               [WEAK]
+                EXPORT  I2C2_ER_IRQHandler               [WEAK]
+                EXPORT  SPI1_IRQHandler                  [WEAK]
+                EXPORT  SPI2_IRQHandler                  [WEAK]
+                EXPORT  USART1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler                [WEAK]
+                EXPORT  USART3_IRQHandler                [WEAK]
+                EXPORT  EXTI15_10_IRQHandler             [WEAK]
+                EXPORT  RTCAlarm_IRQHandler              [WEAK]
+                EXPORT  CEC_IRQHandler                   [WEAK]
+                EXPORT  TIM12_IRQHandler                 [WEAK]
+                EXPORT  TIM13_IRQHandler                 [WEAK]
+                EXPORT  TIM14_IRQHandler                 [WEAK]
+                EXPORT  TIM5_IRQHandler                  [WEAK]
+                EXPORT  SPI3_IRQHandler                  [WEAK]
+                EXPORT  UART4_IRQHandler                 [WEAK]
+                EXPORT  UART5_IRQHandler                 [WEAK]                
+                EXPORT  TIM6_DAC_IRQHandler              [WEAK]
+                EXPORT  TIM7_IRQHandler                  [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler       [WEAK]
+                EXPORT  DMA2_Channel5_IRQHandler         [WEAK]                
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+CEC_IRQHandler
+TIM12_IRQHandler
+TIM13_IRQHandler
+TIM14_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+DMA2_Channel5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s

@@ -0,0 +1,297 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_ld.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Low Density Devices vector table for MDK-ARM 
+;*                      toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1_2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     0                          ; Reserved
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     0                          ; Reserved
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     0                          ; Reserved
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s

@@ -0,0 +1,304 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_ld_vl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Low Density Value Line Devices vector table  
+;*                      for MDK-ARM toolchain.  
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp                    ; Top of Stack
+                DCD     Reset_Handler                   ; Reset Handler
+                DCD     NMI_Handler                     ; NMI Handler
+                DCD     HardFault_Handler               ; Hard Fault Handler
+                DCD     MemManage_Handler               ; MPU Fault Handler
+                DCD     BusFault_Handler                ; Bus Fault Handler
+                DCD     UsageFault_Handler              ; Usage Fault Handler
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     SVC_Handler                     ; SVCall Handler
+                DCD     DebugMon_Handler                ; Debug Monitor Handler
+                DCD     0                               ; Reserved
+                DCD     PendSV_Handler                  ; PendSV Handler
+                DCD     SysTick_Handler                 ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                 ; Window Watchdog
+                DCD     PVD_IRQHandler                  ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler               ; Tamper
+                DCD     RTC_IRQHandler                  ; RTC
+                DCD     FLASH_IRQHandler                ; Flash
+                DCD     RCC_IRQHandler                  ; RCC
+                DCD     EXTI0_IRQHandler                ; EXTI Line 0
+                DCD     EXTI1_IRQHandler                ; EXTI Line 1
+                DCD     EXTI2_IRQHandler                ; EXTI Line 2
+                DCD     EXTI3_IRQHandler                ; EXTI Line 3
+                DCD     EXTI4_IRQHandler                ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler        ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler        ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler        ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler        ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler        ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler        ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler        ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler                 ; ADC1
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     EXTI9_5_IRQHandler              ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM15_IRQHandler       ; TIM1 Break and TIM15
+                DCD     TIM1_UP_TIM16_IRQHandler        ; TIM1 Update and TIM16
+                DCD     TIM1_TRG_COM_TIM17_IRQHandler   ; TIM1 Trigger and Commutation and TIM17
+                DCD     TIM1_CC_IRQHandler              ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler                 ; TIM2
+                DCD     TIM3_IRQHandler                 ; TIM3
+                DCD     0                               ; Reserved
+                DCD     I2C1_EV_IRQHandler              ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler              ; I2C1 Error
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     SPI1_IRQHandler                 ; SPI1
+                DCD     0                               ; Reserved
+                DCD     USART1_IRQHandler               ; USART1
+                DCD     USART2_IRQHandler               ; USART2
+                DCD     0                               ; Reserved
+                DCD     EXTI15_10_IRQHandler            ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler             ; RTC Alarm through EXTI Line
+                DCD     CEC_IRQHandler                  ; HDMI-CEC
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved 
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved 
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     TIM6_DAC_IRQHandler             ; TIM6 and DAC underrun
+                DCD     TIM7_IRQHandler                 ; TIM7
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                      [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler                [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler                [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler                 [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler               [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                      [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler                 [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                   [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                  [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                  [WEAK]
+                EXPORT  PVD_IRQHandler                   [WEAK]
+                EXPORT  TAMPER_IRQHandler                [WEAK]
+                EXPORT  RTC_IRQHandler                   [WEAK]
+                EXPORT  FLASH_IRQHandler                 [WEAK]
+                EXPORT  RCC_IRQHandler                   [WEAK]
+                EXPORT  EXTI0_IRQHandler                 [WEAK]
+                EXPORT  EXTI1_IRQHandler                 [WEAK]
+                EXPORT  EXTI2_IRQHandler                 [WEAK]
+                EXPORT  EXTI3_IRQHandler                 [WEAK]
+                EXPORT  EXTI4_IRQHandler                 [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler         [WEAK]
+                EXPORT  ADC1_IRQHandler                  [WEAK]
+                EXPORT  EXTI9_5_IRQHandler               [WEAK]
+                EXPORT  TIM1_BRK_TIM15_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_TIM16_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM17_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler               [WEAK]
+                EXPORT  TIM2_IRQHandler                  [WEAK]
+                EXPORT  TIM3_IRQHandler                  [WEAK]
+                EXPORT  I2C1_EV_IRQHandler               [WEAK]
+                EXPORT  I2C1_ER_IRQHandler               [WEAK]
+                EXPORT  SPI1_IRQHandler                  [WEAK]
+                EXPORT  USART1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler                [WEAK]
+                EXPORT  EXTI15_10_IRQHandler             [WEAK]
+                EXPORT  RTCAlarm_IRQHandler              [WEAK]
+                EXPORT  CEC_IRQHandler                   [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler              [WEAK]
+                EXPORT  TIM7_IRQHandler                  [WEAK]
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+CEC_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s

@@ -0,0 +1,307 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_md.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Medium Density Devices vector table for MDK-ARM 
+;*                      toolchain.  
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1_2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s

@@ -0,0 +1,315 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_md_vl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Medium Density Value Line Devices vector table  
+;*                      for MDK-ARM toolchain.  
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp                    ; Top of Stack
+                DCD     Reset_Handler                   ; Reset Handler
+                DCD     NMI_Handler                     ; NMI Handler
+                DCD     HardFault_Handler               ; Hard Fault Handler
+                DCD     MemManage_Handler               ; MPU Fault Handler
+                DCD     BusFault_Handler                ; Bus Fault Handler
+                DCD     UsageFault_Handler              ; Usage Fault Handler
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     SVC_Handler                     ; SVCall Handler
+                DCD     DebugMon_Handler                ; Debug Monitor Handler
+                DCD     0                               ; Reserved
+                DCD     PendSV_Handler                  ; PendSV Handler
+                DCD     SysTick_Handler                 ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                 ; Window Watchdog
+                DCD     PVD_IRQHandler                  ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler               ; Tamper
+                DCD     RTC_IRQHandler                  ; RTC
+                DCD     FLASH_IRQHandler                ; Flash
+                DCD     RCC_IRQHandler                  ; RCC
+                DCD     EXTI0_IRQHandler                ; EXTI Line 0
+                DCD     EXTI1_IRQHandler                ; EXTI Line 1
+                DCD     EXTI2_IRQHandler                ; EXTI Line 2
+                DCD     EXTI3_IRQHandler                ; EXTI Line 3
+                DCD     EXTI4_IRQHandler                ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler        ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler        ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler        ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler        ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler        ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler        ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler        ; DMA1 Channel 7
+                DCD     ADC1_IRQHandler                 ; ADC1
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     EXTI9_5_IRQHandler              ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM15_IRQHandler       ; TIM1 Break and TIM15
+                DCD     TIM1_UP_TIM16_IRQHandler        ; TIM1 Update and TIM16
+                DCD     TIM1_TRG_COM_TIM17_IRQHandler   ; TIM1 Trigger and Commutation and TIM17
+                DCD     TIM1_CC_IRQHandler              ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler                 ; TIM2
+                DCD     TIM3_IRQHandler                 ; TIM3
+                DCD     TIM4_IRQHandler                 ; TIM4
+                DCD     I2C1_EV_IRQHandler              ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler              ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler              ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler              ; I2C2 Error
+                DCD     SPI1_IRQHandler                 ; SPI1
+                DCD     SPI2_IRQHandler                 ; SPI2
+                DCD     USART1_IRQHandler               ; USART1
+                DCD     USART2_IRQHandler               ; USART2
+                DCD     USART3_IRQHandler               ; USART3
+                DCD     EXTI15_10_IRQHandler            ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler             ; RTC Alarm through EXTI Line
+                DCD     CEC_IRQHandler                  ; HDMI-CEC
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved 
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved 
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     0                               ; Reserved
+                DCD     TIM6_DAC_IRQHandler             ; TIM6 and DAC underrun
+                DCD     TIM7_IRQHandler                 ; TIM7
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                      [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler                [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler                [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler                 [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler               [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                      [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler                 [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                   [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                  [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                  [WEAK]
+                EXPORT  PVD_IRQHandler                   [WEAK]
+                EXPORT  TAMPER_IRQHandler                [WEAK]
+                EXPORT  RTC_IRQHandler                   [WEAK]
+                EXPORT  FLASH_IRQHandler                 [WEAK]
+                EXPORT  RCC_IRQHandler                   [WEAK]
+                EXPORT  EXTI0_IRQHandler                 [WEAK]
+                EXPORT  EXTI1_IRQHandler                 [WEAK]
+                EXPORT  EXTI2_IRQHandler                 [WEAK]
+                EXPORT  EXTI3_IRQHandler                 [WEAK]
+                EXPORT  EXTI4_IRQHandler                 [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler         [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler         [WEAK]
+                EXPORT  ADC1_IRQHandler                  [WEAK]
+                EXPORT  EXTI9_5_IRQHandler               [WEAK]
+                EXPORT  TIM1_BRK_TIM15_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_TIM16_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM17_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler               [WEAK]
+                EXPORT  TIM2_IRQHandler                  [WEAK]
+                EXPORT  TIM3_IRQHandler                  [WEAK]
+                EXPORT  TIM4_IRQHandler                  [WEAK]
+                EXPORT  I2C1_EV_IRQHandler               [WEAK]
+                EXPORT  I2C1_ER_IRQHandler               [WEAK]
+                EXPORT  I2C2_EV_IRQHandler               [WEAK]
+                EXPORT  I2C2_ER_IRQHandler               [WEAK]
+                EXPORT  SPI1_IRQHandler                  [WEAK]
+                EXPORT  SPI2_IRQHandler                  [WEAK]
+                EXPORT  USART1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler                [WEAK]
+                EXPORT  USART3_IRQHandler                [WEAK]
+                EXPORT  EXTI15_10_IRQHandler             [WEAK]
+                EXPORT  RTCAlarm_IRQHandler              [WEAK]
+                EXPORT  CEC_IRQHandler                   [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler              [WEAK]
+                EXPORT  TIM7_IRQHandler                  [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+CEC_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s

@@ -0,0 +1,358 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_xl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x XL-Density Devices vector table for MDK-ARM 
+;*                      toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system and also configure the external 
+;*                        SRAM mounted on STM3210E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler               ; Window Watchdog
+                DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler             ; Tamper
+                DCD     RTC_IRQHandler                ; RTC
+                DCD     FLASH_IRQHandler              ; Flash
+                DCD     RCC_IRQHandler                ; RCC
+                DCD     EXTI0_IRQHandler              ; EXTI Line 0
+                DCD     EXTI1_IRQHandler              ; EXTI Line 1
+                DCD     EXTI2_IRQHandler              ; EXTI Line 2
+                DCD     EXTI3_IRQHandler              ; EXTI Line 3
+                DCD     EXTI4_IRQHandler              ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler             ; ADC1 & ADC2
+                DCD     USB_HP_CAN1_TX_IRQHandler     ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler    ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler           ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler           ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+                DCD     TIM1_BRK_TIM9_IRQHandler      ; TIM1 Break and TIM9
+                DCD     TIM1_UP_TIM10_IRQHandler      ; TIM1 Update and TIM10
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler               ; TIM2
+                DCD     TIM3_IRQHandler               ; TIM3
+                DCD     TIM4_IRQHandler               ; TIM4
+                DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+                DCD     SPI1_IRQHandler               ; SPI1
+                DCD     SPI2_IRQHandler               ; SPI2
+                DCD     USART1_IRQHandler             ; USART1
+                DCD     USART2_IRQHandler             ; USART2
+                DCD     USART3_IRQHandler             ; USART3
+                DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler           ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler          ; USB Wakeup from suspend
+                DCD     TIM8_BRK_TIM12_IRQHandler     ; TIM8 Break and TIM12
+                DCD     TIM8_UP_TIM13_IRQHandler      ; TIM8 Update and TIM13
+                DCD     TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+                DCD     TIM8_CC_IRQHandler            ; TIM8 Capture Compare
+                DCD     ADC3_IRQHandler               ; ADC3
+                DCD     FSMC_IRQHandler               ; FSMC
+                DCD     SDIO_IRQHandler               ; SDIO
+                DCD     TIM5_IRQHandler               ; TIM5
+                DCD     SPI3_IRQHandler               ; SPI3
+                DCD     UART4_IRQHandler              ; UART4
+                DCD     UART5_IRQHandler              ; UART5
+                DCD     TIM6_IRQHandler               ; TIM6
+                DCD     TIM7_IRQHandler               ; TIM7
+                DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler               [WEAK]
+                EXPORT  PVD_IRQHandler                [WEAK]
+                EXPORT  TAMPER_IRQHandler             [WEAK]
+                EXPORT  RTC_IRQHandler                [WEAK]
+                EXPORT  FLASH_IRQHandler              [WEAK]
+                EXPORT  RCC_IRQHandler                [WEAK]
+                EXPORT  EXTI0_IRQHandler              [WEAK]
+                EXPORT  EXTI1_IRQHandler              [WEAK]
+                EXPORT  EXTI2_IRQHandler              [WEAK]
+                EXPORT  EXTI3_IRQHandler              [WEAK]
+                EXPORT  EXTI4_IRQHandler              [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler      [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler      [WEAK]
+                EXPORT  ADC1_2_IRQHandler             [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler     [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler    [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler           [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler           [WEAK]
+                EXPORT  EXTI9_5_IRQHandler            [WEAK]
+                EXPORT  TIM1_BRK_TIM9_IRQHandler      [WEAK]
+                EXPORT  TIM1_UP_TIM10_IRQHandler      [WEAK]
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+                EXPORT  TIM1_CC_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler               [WEAK]
+                EXPORT  TIM3_IRQHandler               [WEAK]
+                EXPORT  TIM4_IRQHandler               [WEAK]
+                EXPORT  I2C1_EV_IRQHandler            [WEAK]
+                EXPORT  I2C1_ER_IRQHandler            [WEAK]
+                EXPORT  I2C2_EV_IRQHandler            [WEAK]
+                EXPORT  I2C2_ER_IRQHandler            [WEAK]
+                EXPORT  SPI1_IRQHandler               [WEAK]
+                EXPORT  SPI2_IRQHandler               [WEAK]
+                EXPORT  USART1_IRQHandler             [WEAK]
+                EXPORT  USART2_IRQHandler             [WEAK]
+                EXPORT  USART3_IRQHandler             [WEAK]
+                EXPORT  EXTI15_10_IRQHandler          [WEAK]
+                EXPORT  RTCAlarm_IRQHandler           [WEAK]
+                EXPORT  USBWakeUp_IRQHandler          [WEAK]
+                EXPORT  TIM8_BRK_TIM12_IRQHandler     [WEAK]
+                EXPORT  TIM8_UP_TIM13_IRQHandler      [WEAK]
+                EXPORT  TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+                EXPORT  TIM8_CC_IRQHandler            [WEAK]
+                EXPORT  ADC3_IRQHandler               [WEAK]
+                EXPORT  FSMC_IRQHandler               [WEAK]
+                EXPORT  SDIO_IRQHandler               [WEAK]
+                EXPORT  TIM5_IRQHandler               [WEAK]
+                EXPORT  SPI3_IRQHandler               [WEAK]
+                EXPORT  UART4_IRQHandler              [WEAK]
+                EXPORT  UART5_IRQHandler              [WEAK]
+                EXPORT  TIM6_IRQHandler               [WEAK]
+                EXPORT  TIM7_IRQHandler               [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler      [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler    [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s

@@ -0,0 +1,468 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_cl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR 
+  *                  address.
+  *                - Configure the clock system    
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+.equ  BootRAM, 0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs  r1, #0
+  b     LoopCopyDataInit
+
+CopyDataInit:
+  ldr   r3, =_sidata
+  ldr   r3, [r3, r1]
+  str   r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr   r0, =_sdata
+  ldr   r3, =_edata
+  adds  r2, r0, r1
+  cmp   r2, r3
+  bcc   CopyDataInit
+  ldr   r2, =_sbss
+  b     LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs  r3, #0
+  str   r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr   r3, = _ebss
+  cmp   r2, r3
+  bcc   FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit  
+/* Call the application's entry point.*/
+  bl    main
+  bx    lr
+.size   Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt. This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+  .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  CAN1_TX_IRQHandler
+  .word  CAN1_RX0_IRQHandler
+  .word  CAN1_RX1_IRQHandler
+  .word  CAN1_SCE_IRQHandler
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_IRQHandler
+  .word  TIM1_UP_IRQHandler
+  .word  TIM1_TRG_COM_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  OTG_FS_WKUP_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_IRQHandler
+  .word  DMA2_Channel5_IRQHandler
+  .word  ETH_IRQHandler
+  .word  ETH_WKUP_IRQHandler
+  .word  CAN2_TX_IRQHandler
+  .word  CAN2_RX0_IRQHandler
+  .word  CAN2_RX1_IRQHandler
+  .word  CAN2_SCE_IRQHandler
+  .word  OTG_FS_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM     /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+*
+*******************************************************************************/
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  CAN1_TX_IRQHandler
+  .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX0_IRQHandler
+  .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  OTG_FS_WKUP_IRQHandler
+  .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler  
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler  
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler  
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler  
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler  
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler  
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler  
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler  
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_IRQHandler  
+  .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel5_IRQHandler  
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+  .weak  ETH_IRQHandler  
+  .thumb_set ETH_IRQHandler,Default_Handler
+
+  .weak  ETH_WKUP_IRQHandler  
+  .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+  .weak  CAN2_TX_IRQHandler  
+  .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+  .weak  CAN2_RX0_IRQHandler  
+  .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN2_RX1_IRQHandler  
+  .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN2_SCE_IRQHandler  
+  .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+  .weak  OTG_FS_IRQHandler  
+  .thumb_set OTG_FS_IRQHandler ,Default_Handler
+ 
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s

@@ -0,0 +1,465 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_hd.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x High Density Devices vector table for RIDE7 toolchain. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system and the external SRAM mounted on 
+  *                  STM3210E-EVAL board to be used as data memory (optional, 
+  *                  to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit   
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  USB_HP_CAN1_TX_IRQHandler
+  .word  USB_LP_CAN1_RX0_IRQHandler
+  .word  CAN1_RX1_IRQHandler
+  .word  CAN1_SCE_IRQHandler
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_IRQHandler
+  .word  TIM1_UP_IRQHandler
+  .word  TIM1_TRG_COM_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  USBWakeUp_IRQHandler
+  .word  TIM8_BRK_IRQHandler
+  .word  TIM8_UP_IRQHandler
+  .word  TIM8_TRG_COM_IRQHandler
+  .word  TIM8_CC_IRQHandler
+  .word  ADC3_IRQHandler
+  .word  FSMC_IRQHandler
+  .word  SDIO_IRQHandler
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x High Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_IRQHandler
+  .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_IRQHandler
+  .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_IRQHandler
+  .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak  TIM8_BRK_IRQHandler
+  .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+  .weak  TIM8_UP_IRQHandler
+  .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+  .weak  TIM8_TRG_COM_IRQHandler
+  .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+  .weak  TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak  ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s

@@ -0,0 +1,442 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_hd_vl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x High Density Value Line Devices vector table for RIDE7
+  *            toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system and the external SRAM mounted on 
+  *                  STM32100E-EVAL board to be used as data memory (optional, 
+  *                  to be enabled by user)               
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval None
+*/
+
+  .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b     LoopCopyDataInit
+
+CopyDataInit:
+  ldr   r3, =_sidata
+  ldr   r3, [r3, r1]
+  str   r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr   r0, =_sdata
+  ldr   r3, =_edata
+  adds  r2, r0, r1
+  cmp   r2, r3
+  bcc   CopyDataInit
+  ldr   r2, =_sbss
+  b     LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str   r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr   r3, = _ebss
+  cmp   r2, r3
+  bcc   FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit   
+/* Call the application's entry point.*/
+  bl    main
+  bx    lr    
+.size   Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt. This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+  .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+******************************************************************************/    
+  .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM15_IRQHandler
+  .word  TIM1_UP_TIM16_IRQHandler
+  .word  TIM1_TRG_COM_TIM17_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  CEC_IRQHandler  
+  .word  TIM12_IRQHandler
+  .word  TIM13_IRQHandler
+  .word  TIM14_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_DAC_IRQHandler
+  .word  TIM7_IRQHandler  
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  DMA2_Channel5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x High Density Value line devices. */
+   
+/*******************************************************************************
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM12_IRQHandler
+  .thumb_set TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM13_IRQHandler
+  .thumb_set TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM14_IRQHandler
+  .thumb_set TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+  
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler 
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel5_IRQHandler
+  .thumb_set DMA2_Channel5_IRQHandler,Default_Handler      
+  
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s

@@ -0,0 +1,343 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_ld.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Low Density Devices vector table for RIDE7 toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */	
+    
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */  
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:	
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+    
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+    
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit  
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/    
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN1_TX_IRQHandler
+	.word	USB_LP_CAN1_RX0_IRQHandler
+	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+	.word	TIM1_TRG_COM_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI1_IRQHandler
+	.word	0
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	0
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	USBWakeUp_IRQHandler	
+  .word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	BootRAM        /* @0x108. This is for boot in RAM mode for 
+                          STM32F10x Low Density devices.*/
+   
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+*
+*******************************************************************************/
+    
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+	
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+	
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+	
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN1_TX_IRQHandler
+	.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN1_RX0_IRQHandler
+	.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler  
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s

@@ -0,0 +1,383 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_ld_vl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Low Density Value Line Devices vector table for RIDE7
+  *            toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system 
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval None
+*/
+
+  .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b     LoopCopyDataInit
+
+CopyDataInit:
+  ldr   r3, =_sidata
+  ldr   r3, [r3, r1]
+  str   r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr   r0, =_sdata
+  ldr   r3, =_edata
+  adds  r2, r0, r1
+  cmp   r2, r3
+  bcc   CopyDataInit
+  ldr   r2, =_sbss
+  b     LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str   r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr   r3, = _ebss
+  cmp   r2, r3
+  bcc   FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit   
+/* Call the application's entry point.*/
+  bl    main
+  bx    lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt. This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+  .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+******************************************************************************/    
+  .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM15_IRQHandler
+  .word  TIM1_UP_TIM16_IRQHandler
+  .word  TIM1_TRG_COM_TIM17_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  0
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  0
+  .word  0
+  .word  SPI1_IRQHandler
+  .word  0
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  0
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  CEC_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  TIM6_DAC_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM          /* @0x01CC. This is for boot in RAM mode for 
+                            STM32F10x Low Density Value Line devices. */
+   
+/*******************************************************************************
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler  
+  
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s

@@ -0,0 +1,358 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_md.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system 
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */  
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:	
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+    
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+    
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit 	
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt. This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/    
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN1_TX_IRQHandler
+	.word	USB_LP_CAN1_RX0_IRQHandler
+	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+	.word	TIM1_TRG_COM_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	USBWakeUp_IRQHandler	
+  .word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	BootRAM          /* @0x108. This is for boot in RAM mode for 
+                            STM32F10x Medium Density devices. */
+   
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+*
+*******************************************************************************/
+    
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+	
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+	
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+	
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN1_TX_IRQHandler
+	.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN1_RX0_IRQHandler
+	.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s

@@ -0,0 +1,399 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_md_vl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Medium Density Value Line Devices vector table for RIDE7
+  *            toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system                 
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval None
+*/
+
+  .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b     LoopCopyDataInit
+
+CopyDataInit:
+  ldr   r3, =_sidata
+  ldr   r3, [r3, r1]
+  str   r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr   r0, =_sdata
+  ldr   r3, =_edata
+  adds  r2, r0, r1
+  cmp   r2, r3
+  bcc   CopyDataInit
+  ldr   r2, =_sbss
+  b     LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str   r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr   r3, = _ebss
+  cmp   r2, r3
+  bcc   FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit   
+/* Call the application's entry point.*/
+  bl    main
+  bx    lr    
+.size   Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt. This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+  .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+******************************************************************************/    
+  .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM15_IRQHandler
+  .word  TIM1_UP_TIM16_IRQHandler
+  .word  TIM1_TRG_COM_TIM17_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  CEC_IRQHandler  
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0  
+  .word  0
+  .word  0
+  .word  0
+  .word  TIM6_DAC_IRQHandler
+  .word  TIM7_IRQHandler  
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM          /* @0x01CC. This is for boot in RAM mode for 
+                            STM32F10x Medium Value Line Density devices. */
+   
+/*******************************************************************************
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_IRQHandler
+  .thumb_set ADC1_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM15_IRQHandler
+  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM16_IRQHandler
+  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM17_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  CEC_IRQHandler
+  .thumb_set CEC_IRQHandler,Default_Handler
+
+  .weak  TIM6_DAC_IRQHandler
+  .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler  
+  
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s

@@ -0,0 +1,465 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_xl.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x XL-Density Devices vector table for RIDE7 toolchain. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system and the external SRAM mounted on 
+  *                  STM3210E-EVAL board to be used as data memory (optional, 
+  *                  to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+/* Call the clock system intitialization function.*/
+  bl  SystemInit   
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word  WWDG_IRQHandler
+  .word  PVD_IRQHandler
+  .word  TAMPER_IRQHandler
+  .word  RTC_IRQHandler
+  .word  FLASH_IRQHandler
+  .word  RCC_IRQHandler
+  .word  EXTI0_IRQHandler
+  .word  EXTI1_IRQHandler
+  .word  EXTI2_IRQHandler
+  .word  EXTI3_IRQHandler
+  .word  EXTI4_IRQHandler
+  .word  DMA1_Channel1_IRQHandler
+  .word  DMA1_Channel2_IRQHandler
+  .word  DMA1_Channel3_IRQHandler
+  .word  DMA1_Channel4_IRQHandler
+  .word  DMA1_Channel5_IRQHandler
+  .word  DMA1_Channel6_IRQHandler
+  .word  DMA1_Channel7_IRQHandler
+  .word  ADC1_2_IRQHandler
+  .word  USB_HP_CAN1_TX_IRQHandler
+  .word  USB_LP_CAN1_RX0_IRQHandler
+  .word  CAN1_RX1_IRQHandler
+  .word  CAN1_SCE_IRQHandler
+  .word  EXTI9_5_IRQHandler
+  .word  TIM1_BRK_TIM9_IRQHandler
+  .word  TIM1_UP_TIM10_IRQHandler
+  .word  TIM1_TRG_COM_TIM11_IRQHandler
+  .word  TIM1_CC_IRQHandler
+  .word  TIM2_IRQHandler
+  .word  TIM3_IRQHandler
+  .word  TIM4_IRQHandler
+  .word  I2C1_EV_IRQHandler
+  .word  I2C1_ER_IRQHandler
+  .word  I2C2_EV_IRQHandler
+  .word  I2C2_ER_IRQHandler
+  .word  SPI1_IRQHandler
+  .word  SPI2_IRQHandler
+  .word  USART1_IRQHandler
+  .word  USART2_IRQHandler
+  .word  USART3_IRQHandler
+  .word  EXTI15_10_IRQHandler
+  .word  RTCAlarm_IRQHandler
+  .word  USBWakeUp_IRQHandler
+  .word  TIM8_BRK_TIM12_IRQHandler
+  .word  TIM8_UP_TIM13_IRQHandler
+  .word  TIM8_TRG_COM_TIM14_IRQHandler
+  .word  TIM8_CC_IRQHandler
+  .word  ADC3_IRQHandler
+  .word  FSMC_IRQHandler
+  .word  SDIO_IRQHandler
+  .word  TIM5_IRQHandler
+  .word  SPI3_IRQHandler
+  .word  UART4_IRQHandler
+  .word  UART5_IRQHandler
+  .word  TIM6_IRQHandler
+  .word  TIM7_IRQHandler
+  .word  DMA2_Channel1_IRQHandler
+  .word  DMA2_Channel2_IRQHandler
+  .word  DMA2_Channel3_IRQHandler
+  .word  DMA2_Channel4_5_IRQHandler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for 
+                         STM32F10x XL Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+    
+  .weak  NMI_Handler
+  .thumb_set NMI_Handler,Default_Handler
+  
+  .weak  HardFault_Handler
+  .thumb_set HardFault_Handler,Default_Handler
+  
+  .weak  MemManage_Handler
+  .thumb_set MemManage_Handler,Default_Handler
+  
+  .weak  BusFault_Handler
+  .thumb_set BusFault_Handler,Default_Handler
+
+  .weak  UsageFault_Handler
+  .thumb_set UsageFault_Handler,Default_Handler
+
+  .weak  SVC_Handler
+  .thumb_set SVC_Handler,Default_Handler
+
+  .weak  DebugMon_Handler
+  .thumb_set DebugMon_Handler,Default_Handler
+
+  .weak  PendSV_Handler
+  .thumb_set PendSV_Handler,Default_Handler
+
+  .weak  SysTick_Handler
+  .thumb_set SysTick_Handler,Default_Handler
+
+  .weak  WWDG_IRQHandler
+  .thumb_set WWDG_IRQHandler,Default_Handler
+
+  .weak  PVD_IRQHandler
+  .thumb_set PVD_IRQHandler,Default_Handler
+
+  .weak  TAMPER_IRQHandler
+  .thumb_set TAMPER_IRQHandler,Default_Handler
+
+  .weak  RTC_IRQHandler
+  .thumb_set RTC_IRQHandler,Default_Handler
+
+  .weak  FLASH_IRQHandler
+  .thumb_set FLASH_IRQHandler,Default_Handler
+
+  .weak  RCC_IRQHandler
+  .thumb_set RCC_IRQHandler,Default_Handler
+
+  .weak  EXTI0_IRQHandler
+  .thumb_set EXTI0_IRQHandler,Default_Handler
+
+  .weak  EXTI1_IRQHandler
+  .thumb_set EXTI1_IRQHandler,Default_Handler
+
+  .weak  EXTI2_IRQHandler
+  .thumb_set EXTI2_IRQHandler,Default_Handler
+
+  .weak  EXTI3_IRQHandler
+  .thumb_set EXTI3_IRQHandler,Default_Handler
+
+  .weak  EXTI4_IRQHandler
+  .thumb_set EXTI4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel1_IRQHandler
+  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel2_IRQHandler
+  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel3_IRQHandler
+  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel4_IRQHandler
+  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel5_IRQHandler
+  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel6_IRQHandler
+  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+  .weak  DMA1_Channel7_IRQHandler
+  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+  .weak  ADC1_2_IRQHandler
+  .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+  .weak  USB_HP_CAN1_TX_IRQHandler
+  .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+  .weak  USB_LP_CAN1_RX0_IRQHandler
+  .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+  .weak  CAN1_RX1_IRQHandler
+  .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+  .weak  CAN1_SCE_IRQHandler
+  .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+  .weak  EXTI9_5_IRQHandler
+  .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+  .weak  TIM1_BRK_TIM9_IRQHandler
+  .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+  .weak  TIM1_UP_TIM10_IRQHandler
+  .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+  .weak  TIM1_TRG_COM_TIM11_IRQHandler
+  .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+  .weak  TIM1_CC_IRQHandler
+  .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+  .weak  TIM2_IRQHandler
+  .thumb_set TIM2_IRQHandler,Default_Handler
+
+  .weak  TIM3_IRQHandler
+  .thumb_set TIM3_IRQHandler,Default_Handler
+
+  .weak  TIM4_IRQHandler
+  .thumb_set TIM4_IRQHandler,Default_Handler
+
+  .weak  I2C1_EV_IRQHandler
+  .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+  .weak  I2C1_ER_IRQHandler
+  .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+  .weak  I2C2_EV_IRQHandler
+  .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+  .weak  I2C2_ER_IRQHandler
+  .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+  .weak  SPI1_IRQHandler
+  .thumb_set SPI1_IRQHandler,Default_Handler
+
+  .weak  SPI2_IRQHandler
+  .thumb_set SPI2_IRQHandler,Default_Handler
+
+  .weak  USART1_IRQHandler
+  .thumb_set USART1_IRQHandler,Default_Handler
+
+  .weak  USART2_IRQHandler
+  .thumb_set USART2_IRQHandler,Default_Handler
+
+  .weak  USART3_IRQHandler
+  .thumb_set USART3_IRQHandler,Default_Handler
+
+  .weak  EXTI15_10_IRQHandler
+  .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+  .weak  RTCAlarm_IRQHandler
+  .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+  .weak  USBWakeUp_IRQHandler
+  .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+  .weak  TIM8_BRK_TIM12_IRQHandler
+  .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+  .weak  TIM8_UP_TIM13_IRQHandler
+  .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+  .weak  TIM8_TRG_COM_TIM14_IRQHandler
+  .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+  .weak  TIM8_CC_IRQHandler
+  .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+  .weak  ADC3_IRQHandler
+  .thumb_set ADC3_IRQHandler,Default_Handler
+
+  .weak  FSMC_IRQHandler
+  .thumb_set FSMC_IRQHandler,Default_Handler
+
+  .weak  SDIO_IRQHandler
+  .thumb_set SDIO_IRQHandler,Default_Handler
+
+  .weak  TIM5_IRQHandler
+  .thumb_set TIM5_IRQHandler,Default_Handler
+
+  .weak  SPI3_IRQHandler
+  .thumb_set SPI3_IRQHandler,Default_Handler
+
+  .weak  UART4_IRQHandler
+  .thumb_set UART4_IRQHandler,Default_Handler
+
+  .weak  UART5_IRQHandler
+  .thumb_set UART5_IRQHandler,Default_Handler
+
+  .weak  TIM6_IRQHandler
+  .thumb_set TIM6_IRQHandler,Default_Handler
+
+  .weak  TIM7_IRQHandler
+  .thumb_set TIM7_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel1_IRQHandler
+  .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel2_IRQHandler
+  .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel3_IRQHandler
+  .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+  .weak  DMA2_Channel4_5_IRQHandler
+  .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s

@@ -0,0 +1,507 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+;* File Name          : startup_stm32f10x_cl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Connectivity line devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler            ; Window Watchdog
+        DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler          ; Tamper
+        DCD     RTC_IRQHandler             ; RTC
+        DCD     FLASH_IRQHandler           ; Flash
+        DCD     RCC_IRQHandler             ; RCC
+        DCD     EXTI0_IRQHandler           ; EXTI Line 0
+        DCD     EXTI1_IRQHandler           ; EXTI Line 1
+        DCD     EXTI2_IRQHandler           ; EXTI Line 2
+        DCD     EXTI3_IRQHandler           ; EXTI Line 3
+        DCD     EXTI4_IRQHandler           ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler          ; ADC1 and ADC2
+        DCD     CAN1_TX_IRQHandler         ; CAN1 TX
+        DCD     CAN1_RX0_IRQHandler        ; CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler            ; TIM2
+        DCD     TIM3_IRQHandler            ; TIM3
+        DCD     TIM4_IRQHandler            ; TIM4
+        DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler         ; I2C1 Error
+        DCD     SPI1_IRQHandler            ; SPI1
+        DCD     SPI2_IRQHandler            ; SPI2
+        DCD     USART1_IRQHandler          ; USART1
+        DCD     USART2_IRQHandler          ; USART2
+        DCD     USART3_IRQHandler          ; USART3
+        DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler        ; RTC alarm through EXTI line
+        DCD     OTG_FS_WKUP_IRQHandler     ; USB OTG FS Wakeup through EXTI line
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     0                          ; Reserved
+        DCD     TIM5_IRQHandler            ; TIM5
+        DCD     SPI3_IRQHandler            ; SPI3
+        DCD     UART4_IRQHandler           ; UART4
+        DCD     UART5_IRQHandler           ; UART5
+        DCD     TIM6_IRQHandler            ; TIM6
+        DCD     TIM7_IRQHandler            ; TIM7
+        DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+        DCD     DMA2_Channel4_IRQHandler   ; DMA2 Channel4
+        DCD     DMA2_Channel5_IRQHandler   ; DMA2 Channel5
+        DCD     ETH_IRQHandler             ; Ethernet
+        DCD     ETH_WKUP_IRQHandler        ; Ethernet Wakeup through EXTI line
+        DCD     CAN2_TX_IRQHandler         ; CAN2 TX
+        DCD     CAN2_RX0_IRQHandler        ; CAN2 RX0
+        DCD     CAN2_RX1_IRQHandler        ; CAN2 RX1
+        DCD     CAN2_SCE_IRQHandler        ; CAN2 SCE
+        DCD     OTG_FS_IRQHandler          ; USB OTG FS
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_TX_IRQHandler
+        B CAN1_TX_IRQHandler
+
+        PUBWEAK CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_RX0_IRQHandler
+        B CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler    
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK OTG_FS_WKUP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+OTG_FS_WKUP_IRQHandler
+        B OTG_FS_WKUP_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_IRQHandler
+        B DMA2_Channel4_IRQHandler
+
+        PUBWEAK DMA2_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel5_IRQHandler
+        B DMA2_Channel5_IRQHandler
+
+        PUBWEAK ETH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ETH_IRQHandler
+        B ETH_IRQHandler
+
+        PUBWEAK ETH_WKUP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ETH_WKUP_IRQHandler
+        B ETH_WKUP_IRQHandler
+
+        PUBWEAK CAN2_TX_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN2_TX_IRQHandler
+        B CAN2_TX_IRQHandler
+
+        PUBWEAK CAN2_RX0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN2_RX0_IRQHandler
+        B CAN2_RX0_IRQHandler
+
+        PUBWEAK CAN2_RX1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN2_RX1_IRQHandler
+        B CAN2_RX1_IRQHandler
+
+        PUBWEAK CAN2_SCE_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN2_SCE_IRQHandler
+        B CAN2_SCE_IRQHandler
+
+        PUBWEAK OTG_FS_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+OTG_FS_IRQHandler
+        B OTG_FS_IRQHandler
+
+        END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s

@@ -0,0 +1,496 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_hd.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x High Density Devices vector table for EWARM 
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system and the external SRAM 
+;*                        mounted on STM3210E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR address,
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;     
+  
+    MODULE  ?cstartup
+        
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+       
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler        ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+        DCD     TIM8_BRK_IRQHandler       ; TIM8 Break
+        DCD     TIM8_UP_IRQHandler        ; TIM8 Update
+        DCD     TIM8_TRG_COM_IRQHandler   ; TIM8 Trigger and Commutation
+        DCD     TIM8_CC_IRQHandler        ; TIM8 Capture Compare
+        DCD     ADC3_IRQHandler           ; ADC3
+        DCD     FSMC_IRQHandler           ; FSMC
+        DCD     SDIO_IRQHandler           ; SDIO
+        DCD     TIM5_IRQHandler           ; TIM5
+        DCD     SPI3_IRQHandler           ; SPI3
+        DCD     UART4_IRQHandler          ; UART4
+        DCD     UART5_IRQHandler          ; UART5
+        DCD     TIM6_IRQHandler           ; TIM6
+        DCD     TIM7_IRQHandler           ; TIM7
+        DCD     DMA2_Channel1_IRQHandler  ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler  ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler  ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+               
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        PUBWEAK TIM8_BRK_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_BRK_IRQHandler
+        B TIM8_BRK_IRQHandler
+
+        PUBWEAK TIM8_UP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_UP_IRQHandler
+        B TIM8_UP_IRQHandler
+
+        PUBWEAK TIM8_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_TRG_COM_IRQHandler
+        B TIM8_TRG_COM_IRQHandler
+
+        PUBWEAK TIM8_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_CC_IRQHandler
+        B TIM8_CC_IRQHandler
+
+        PUBWEAK ADC3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC3_IRQHandler
+        B ADC3_IRQHandler
+
+        PUBWEAK FSMC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FSMC_IRQHandler
+        B FSMC_IRQHandler
+
+        PUBWEAK SDIO_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SDIO_IRQHandler
+        B SDIO_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+        
+        
+        END
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s

@@ -0,0 +1,461 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_hd_vl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x High Density Value Line Devices vector table 
+;*                      for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system and the external SRAM 
+;*                        mounted on STM32100E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler               ; ADC1
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM15_IRQHandler     ; TIM1 Break and TIM15
+        DCD     TIM1_UP_TIM16_IRQHandler      ; TIM1 Update and TIM16
+        DCD     TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     CEC_IRQHandler                ; HDMI-CEC
+        DCD     TIM12_IRQHandler              ; TIM12
+        DCD     TIM13_IRQHandler              ; TIM13
+        DCD     TIM14_IRQHandler              ; TIM14
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     TIM5_IRQHandler               ; TIM5
+        DCD     SPI3_IRQHandler               ; SPI3
+        DCD     UART4_IRQHandler              ; UART4
+        DCD     UART5_IRQHandler              ; UART5                       
+        DCD     TIM6_DAC_IRQHandler           ; TIM6 and DAC underrun
+        DCD     TIM7_IRQHandler               ; TIM7     
+        DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5                   
+        DCD     DMA2_Channel5_IRQHandler      ; DMA2 Channel5
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM15_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+        B TIM1_BRK_TIM15_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM16_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+        B TIM1_UP_TIM16_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+        B TIM1_TRG_COM_TIM17_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CEC_IRQHandler
+        B CEC_IRQHandler
+
+        PUBWEAK TIM12_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM12_IRQHandler
+        B TIM12_IRQHandler
+
+        PUBWEAK TIM13_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM13_IRQHandler
+        B TIM13_IRQHandler
+
+        PUBWEAK TIM14_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM14_IRQHandler
+        B TIM14_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+        
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM6_DAC_IRQHandler
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler                
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+
+        PUBWEAK DMA2_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel5_IRQHandler
+        B DMA2_Channel5_IRQHandler
+                
+        END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s

@@ -0,0 +1,366 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_ld.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Low Density Devices vector table for EWARM
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler        ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     0                         ; Reserved
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     0                         ; Reserved
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     0                         ; Reserved
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+        
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+        
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+        
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+        
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+        
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+        
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+        
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+        
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+        
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+        
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+        
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+        
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+        
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+        
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+        
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+        
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+        
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+        
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+        
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+        
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+        
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+        
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+        
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+        
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+        
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+        
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+        
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+        
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+        
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+        
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+        
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+        
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+        
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+        
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+        
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+        
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+        
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+        
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+        
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+        
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+        
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+                      
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s

@@ -0,0 +1,369 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_ld_vl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Low Density Value Line Devices vector table 
+;*                      for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler               ; ADC1
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM15_IRQHandler     ; TIM1 Break and TIM15
+        DCD     TIM1_UP_TIM16_IRQHandler      ; TIM1 Update and TIM16
+        DCD     TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     0                             ; Reserved
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     0                             ; Reserved
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     0                             ; Reserved
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     CEC_IRQHandler                ; HDMI-CEC
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     TIM6_DAC_IRQHandler           ; TIM6 and DAC underrun
+        DCD     TIM7_IRQHandler               ; TIM7
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM15_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+        B TIM1_BRK_TIM15_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM16_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+        B TIM1_UP_TIM16_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+        B TIM1_TRG_COM_TIM17_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CEC_IRQHandler
+        B CEC_IRQHandler
+
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM6_DAC_IRQHandler
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler                
+
+        END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s

@@ -0,0 +1,391 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_md.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Medium Density Devices vector table for 
+;*                      EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler           ; Window Watchdog
+        DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler         ; Tamper
+        DCD     RTC_IRQHandler            ; RTC
+        DCD     FLASH_IRQHandler          ; Flash
+        DCD     RCC_IRQHandler            ; RCC
+        DCD     EXTI0_IRQHandler          ; EXTI Line 0
+        DCD     EXTI1_IRQHandler          ; EXTI Line 1
+        DCD     EXTI2_IRQHandler          ; EXTI Line 2
+        DCD     EXTI3_IRQHandler          ; EXTI Line 3
+        DCD     EXTI4_IRQHandler          ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler  ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler  ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler  ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler  ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler  ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler  ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler  ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler         ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler       ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler       ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler        ; EXTI Line 9..5
+        DCD     TIM1_BRK_IRQHandler       ; TIM1 Break
+        DCD     TIM1_UP_IRQHandler        ; TIM1 Update
+        DCD     TIM1_TRG_COM_IRQHandler   ; TIM1 Trigger and Commutation
+        DCD     TIM1_CC_IRQHandler        ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler           ; TIM2
+        DCD     TIM3_IRQHandler           ; TIM3
+        DCD     TIM4_IRQHandler           ; TIM4
+        DCD     I2C1_EV_IRQHandler        ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler        ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler        ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler        ; I2C2 Error
+        DCD     SPI1_IRQHandler           ; SPI1
+        DCD     SPI2_IRQHandler           ; SPI2
+        DCD     USART1_IRQHandler         ; USART1
+        DCD     USART2_IRQHandler         ; USART2
+        DCD     USART3_IRQHandler         ; USART3
+        DCD     EXTI15_10_IRQHandler      ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler       ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler      ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+        B TIM1_BRK_IRQHandler
+
+        PUBWEAK TIM1_UP_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+        B TIM1_UP_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+        B TIM1_TRG_COM_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s

@@ -0,0 +1,394 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_md_vl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x Medium Density Value Line Devices vector table 
+;*                      for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_IRQHandler               ; ADC1
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM15_IRQHandler     ; TIM1 Break and TIM15
+        DCD     TIM1_UP_TIM16_IRQHandler      ; TIM1 Update and TIM16
+        DCD     TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     CEC_IRQHandler                ; HDMI-CEC
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved
+        DCD     0                             ; Reserved                        
+        DCD     TIM6_DAC_IRQHandler           ; TIM6 and DAC underrun
+        DCD     TIM7_IRQHandler               ; TIM7                
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+        
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+        B ADC1_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM15_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+        B TIM1_BRK_TIM15_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM16_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+        B TIM1_UP_TIM16_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+        B TIM1_TRG_COM_TIM17_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CEC_IRQHandler
+        B CEC_IRQHandler
+
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM6_DAC_IRQHandler
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler                
+
+        END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s

@@ -0,0 +1,496 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_xl.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.0
+;* Date               : 11-March-2011
+;* Description        : STM32F10x XL-Density Devices vector table for EWARM 
+;*                      toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Configure the clock system and the external SRAM 
+;*                        mounted on STM3210E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Set the initial PC == __iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR address,
+;*                      After Reset the Cortex-M3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;     
+  
+    MODULE  ?cstartup
+        
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit        
+        PUBLIC  __vector_table
+
+        DATA
+       
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler               ; Window Watchdog
+        DCD     PVD_IRQHandler                ; PVD through EXTI Line detect
+        DCD     TAMPER_IRQHandler             ; Tamper
+        DCD     RTC_IRQHandler                ; RTC
+        DCD     FLASH_IRQHandler              ; Flash
+        DCD     RCC_IRQHandler                ; RCC
+        DCD     EXTI0_IRQHandler              ; EXTI Line 0
+        DCD     EXTI1_IRQHandler              ; EXTI Line 1
+        DCD     EXTI2_IRQHandler              ; EXTI Line 2
+        DCD     EXTI3_IRQHandler              ; EXTI Line 3
+        DCD     EXTI4_IRQHandler              ; EXTI Line 4
+        DCD     DMA1_Channel1_IRQHandler      ; DMA1 Channel 1
+        DCD     DMA1_Channel2_IRQHandler      ; DMA1 Channel 2
+        DCD     DMA1_Channel3_IRQHandler      ; DMA1 Channel 3
+        DCD     DMA1_Channel4_IRQHandler      ; DMA1 Channel 4
+        DCD     DMA1_Channel5_IRQHandler      ; DMA1 Channel 5
+        DCD     DMA1_Channel6_IRQHandler      ; DMA1 Channel 6
+        DCD     DMA1_Channel7_IRQHandler      ; DMA1 Channel 7
+        DCD     ADC1_2_IRQHandler             ; ADC1 & ADC2
+        DCD     USB_HP_CAN1_TX_IRQHandler     ; USB High Priority or CAN1 TX
+        DCD     USB_LP_CAN1_RX0_IRQHandler    ; USB Low  Priority or CAN1 RX0
+        DCD     CAN1_RX1_IRQHandler           ; CAN1 RX1
+        DCD     CAN1_SCE_IRQHandler           ; CAN1 SCE
+        DCD     EXTI9_5_IRQHandler            ; EXTI Line 9..5
+        DCD     TIM1_BRK_TIM9_IRQHandler      ; TIM1 Break and TIM9
+        DCD     TIM1_UP_TIM10_IRQHandler      ; TIM1 Update and TIM10
+        DCD     TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+        DCD     TIM1_CC_IRQHandler            ; TIM1 Capture Compare
+        DCD     TIM2_IRQHandler               ; TIM2
+        DCD     TIM3_IRQHandler               ; TIM3
+        DCD     TIM4_IRQHandler               ; TIM4
+        DCD     I2C1_EV_IRQHandler            ; I2C1 Event
+        DCD     I2C1_ER_IRQHandler            ; I2C1 Error
+        DCD     I2C2_EV_IRQHandler            ; I2C2 Event
+        DCD     I2C2_ER_IRQHandler            ; I2C2 Error
+        DCD     SPI1_IRQHandler               ; SPI1
+        DCD     SPI2_IRQHandler               ; SPI2
+        DCD     USART1_IRQHandler             ; USART1
+        DCD     USART2_IRQHandler             ; USART2
+        DCD     USART3_IRQHandler             ; USART3
+        DCD     EXTI15_10_IRQHandler          ; EXTI Line 15..10
+        DCD     RTCAlarm_IRQHandler           ; RTC Alarm through EXTI Line
+        DCD     USBWakeUp_IRQHandler          ; USB Wakeup from suspend
+        DCD     TIM8_BRK_TIM12_IRQHandler     ; TIM8 Break and TIM12
+        DCD     TIM8_UP_TIM13_IRQHandler      ; TIM8 Update and TIM13
+        DCD     TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+        DCD     TIM8_CC_IRQHandler            ; TIM8 Capture Compare
+        DCD     ADC3_IRQHandler               ; ADC3
+        DCD     FSMC_IRQHandler               ; FSMC
+        DCD     SDIO_IRQHandler               ; SDIO
+        DCD     TIM5_IRQHandler               ; TIM5
+        DCD     SPI3_IRQHandler               ; SPI3
+        DCD     UART4_IRQHandler              ; UART4
+        DCD     UART5_IRQHandler              ; UART5
+        DCD     TIM6_IRQHandler               ; TIM6
+        DCD     TIM7_IRQHandler               ; TIM7
+        DCD     DMA2_Channel1_IRQHandler      ; DMA2 Channel1
+        DCD     DMA2_Channel2_IRQHandler      ; DMA2 Channel2
+        DCD     DMA2_Channel3_IRQHandler      ; DMA2 Channel3
+        DCD     DMA2_Channel4_5_IRQHandler    ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+               
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+        PUBWEAK TAMPER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+        B TAMPER_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+        PUBWEAK DMA1_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+        B DMA1_Channel2_IRQHandler
+
+        PUBWEAK DMA1_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+        B DMA1_Channel3_IRQHandler
+
+        PUBWEAK DMA1_Channel4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+        B DMA1_Channel4_IRQHandler
+
+        PUBWEAK DMA1_Channel5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+        B DMA1_Channel5_IRQHandler
+
+        PUBWEAK DMA1_Channel6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+        B DMA1_Channel6_IRQHandler
+
+        PUBWEAK DMA1_Channel7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+        B DMA1_Channel7_IRQHandler
+
+        PUBWEAK ADC1_2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+        B ADC1_2_IRQHandler
+
+        PUBWEAK USB_HP_CAN1_TX_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+        B USB_HP_CAN1_TX_IRQHandler
+
+        PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+        B USB_LP_CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM9_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM9_IRQHandler
+        B TIM1_BRK_TIM9_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM10_IRQHandler
+        B TIM1_UP_TIM10_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM11_IRQHandler
+        B TIM1_TRG_COM_TIM11_IRQHandler
+
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTCAlarm_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+        B RTCAlarm_IRQHandler
+
+        PUBWEAK USBWakeUp_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+        B USBWakeUp_IRQHandler
+
+        PUBWEAK TIM8_BRK_TIM12_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_BRK_TIM12_IRQHandler
+        B TIM8_BRK_TIM12_IRQHandler
+
+        PUBWEAK TIM8_UP_TIM13_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_UP_TIM13_IRQHandler
+        B TIM8_UP_TIM13_IRQHandler
+
+        PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_TRG_COM_TIM14_IRQHandler
+        B TIM8_TRG_COM_TIM14_IRQHandler
+
+        PUBWEAK TIM8_CC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM8_CC_IRQHandler
+        B TIM8_CC_IRQHandler
+
+        PUBWEAK ADC3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC3_IRQHandler
+        B ADC3_IRQHandler
+
+        PUBWEAK FSMC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+FSMC_IRQHandler
+        B FSMC_IRQHandler
+
+        PUBWEAK SDIO_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SDIO_IRQHandler
+        B SDIO_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM6_IRQHandler
+        B TIM6_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Channel1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+        B DMA2_Channel1_IRQHandler
+
+        PUBWEAK DMA2_Channel2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+        B DMA2_Channel2_IRQHandler
+
+        PUBWEAK DMA2_Channel3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+        B DMA2_Channel3_IRQHandler
+
+        PUBWEAK DMA2_Channel4_5_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_5_IRQHandler
+        B DMA2_Channel4_5_IRQHandler
+        
+        
+        END
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h

@@ -0,0 +1,98 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

Libraries/CMSIS/CMSIS debug support.htm

@@ -0,0 +1,243 @@
+<html>
+
+<head>
+<title>CMSIS Debug Support</title>
+<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
+<meta name="GENERATOR" content="Microsoft FrontPage 6.0">
+<meta name="ProgId" content="FrontPage.Editor.Document">
+<style>
+<!--
+/*-----------------------------------------------------------
+Keil Software CHM Style Sheet
+-----------------------------------------------------------*/
+body         { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family: 
+               Verdana, Arial, 'Sans Serif' }
+a:link       { color: #0000FF; text-decoration: underline }
+a:visited    { color: #0000FF; text-decoration: underline }
+a:active     { color: #FF0000; text-decoration: underline }
+a:hover      { color: #FF0000; text-decoration: underline }
+h1           { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold; 
+               text-align: Center; margin-right: 3 }
+h2           { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold; 
+               background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; 
+               padding: 6 }
+h3           { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color: 
+               #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
+pre          { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC; 
+               margin-left: 24; margin-right: 24 }
+ul           { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
+ol           { margin-top: 6pt; margin-bottom: 0 }
+li           { clear: both; margin-bottom: 6pt }
+table        { font-size: 100%; border-width: 0; padding: 0 }
+th           { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align: 
+               bottom; padding-right: 6pt }
+tr           { text-align: left; vertical-align: top }
+td           { text-align: left; vertical-align: top; padding-right: 6pt }
+.ToolT       { font-size: 8pt; color: #808080 }
+.TinyT       { font-size: 8pt; text-align: Center }
+code         { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier; 
+               line-height: 120%; font-style: normal }
+/*-----------------------------------------------------------
+Notes
+-----------------------------------------------------------*/
+p.note       { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
+/*-----------------------------------------------------------
+Expanding/Contracting Divisions
+-----------------------------------------------------------*/
+#expand      { text-decoration: none; margin-bottom: 3pt }
+img.expand   { border-style: none; border-width: medium }
+div.expand   { display: none; margin-left: 9pt; margin-top: 0 }
+/*-----------------------------------------------------------
+Where List Tags
+-----------------------------------------------------------*/
+p.wh         { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
+table.wh     { width: 100% }
+td.whItem    { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom: 
+               6pt }
+td.whDesc    { padding-bottom: 6pt }
+/*-----------------------------------------------------------
+Keil Table Tags
+-----------------------------------------------------------*/
+table.kt     { border: 1pt solid #000000 }
+th.kt        { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt; 
+               padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
+tr.kt        {  }
+td.kt        { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0; 
+               padding-left: 6pt; padding-right: 6pt; padding-top: 2pt; 
+               padding-bottom: 2pt }
+/*-----------------------------------------------------------
+-----------------------------------------------------------*/
+-->
+
+</style>
+</head>
+
+<body>
+
+<h1>CMSIS Debug Support</h1>
+
+<hr>
+
+<h2>Cortex-M3 ITM Debug Access</h2>
+<p>
+  The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that provides together with 
+  the Serial Viewer Output trace capabilities for the microcontroller system. The ITM has 
+  32 communication channels which are able to transmit 32 / 16 / 8 bit values; two ITM 
+  communication channels are used by CMSIS to output the following information:
+</p>
+<ul>
+	<li>ITM Channel 0: used for printf-style output via the debug interface.</li>
+	<li>ITM Channel 31: is reserved for RTOS kernel awareness debugging.</li>
+</ul>
+
+<h2>Debug IN / OUT functions</h2>
+<p>CMSIS provides following debug functions:</p>
+<ul>
+	<li>ITM_SendChar (uses ITM channel 0)</li>
+	<li>ITM_ReceiveChar (uses global variable)</li>
+	<li>ITM_CheckChar (uses global variable)</li>
+</ul>
+
+<h3>ITM_SendChar</h3>
+<p>
+  <strong>ITM_SendChar</strong> is used to transmit a character over ITM channel 0 from 
+  the microcontroller system to the debug system. <br>
+  Only a 8 bit value is transmitted.
+</p>
+<pre>
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  /* check if debugger connected and ITM channel enabled for tracing */
+  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA)  &amp;&amp;
+      (ITM-&gt;TCR & ITM_TCR_ITMENA)                  &amp;&amp;
+      (ITM-&gt;TER & (1UL &lt;&lt; 0))  ) 
+  {
+    while (ITM-&gt;PORT[0].u32 == 0);
+    ITM-&gt;PORT[0].u8 = (uint8_t)ch;
+  }  
+  return (ch);
+}</pre>
+
+<h3>ITM_ReceiveChar</h3>
+<p>
+  ITM communication channel is only capable for OUT direction. For IN direction
+  a globel variable is used. A simple mechansim detects if a character is received.
+  The project to test need to be build with debug information.
+</p>
+
+<p>
+  The globale variable <strong>ITM_RxBuffer</strong> is used to transmit a 8 bit value from debug system
+  to microcontroller system. <strong>ITM_RxBuffer</strong> is 32 bit wide to enshure a proper handshake.
+</p>
+<pre>
+extern volatile int ITM_RxBuffer;                    /* variable to receive characters                             */
+</pre>
+<p>
+  A dedicated bit pattern is used to determin if <strong>ITM_RxBuffer</strong> is empty
+  or contains a valid value.
+</p>
+<pre>
+#define             ITM_RXBUFFER_EMPTY    0x5AA55AA5 /* value identifying ITM_RxBuffer is ready for next character */
+</pre>
+<p>
+  <strong>ITM_ReceiveChar</strong> is used to receive a 8 bit value from the debug system. The function is nonblocking.
+  It returns the received character or '-1' if no character was available.
+</p>
+<pre>
+static __INLINE int ITM_ReceiveChar (void) {
+  int ch = -1;                               /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+  
+  return (ch); 
+}
+</pre>
+
+<h3>ITM_CheckChar</h3>
+<p>
+  <strong>ITM_CheckChar</strong> is used to check if a character is received.
+</p>
+<pre>
+static __INLINE int ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}</pre>
+
+
+<h2>ITM Debug Support in uVision</h2>
+<p>
+  uVision uses in a debug session the <strong>Debug (printf) Viewer</strong> window to 
+  display the debug data.
+</p>
+<p>Direction microcontroller system -&gt; uVision:</p>
+<ul>
+  <li>
+    Characters received via ITM communication channel 0 are written in a printf style
+    to <strong>Debug (printf) Viewer</strong> window.
+  </li>
+</ul>
+
+<p>Direction uVision -&gt; microcontroller system:</p>
+<ul>
+  <li>Check if <strong>ITM_RxBuffer</strong> variable is available (only performed once).</li>
+  <li>Read character from <strong>Debug (printf) Viewer</strong> window.</li>
+  <li>If <strong>ITM_RxBuffer</strong> empty write character to <strong>ITM_RxBuffer</strong>.</li>
+</ul>
+
+<p class="Note">Note</p>
+<ul>
+  <li><p>Current solution does not use a buffer machanism for trasmitting the characters.</p>
+  </li>
+</ul>
+
+<h2>RTX Kernel awareness in uVision</h2>
+<p>
+  uVision / RTX are using a simple and efficient solution for RTX Kernel awareness.
+  No format overhead is necessary.<br>
+  uVsion debugger decodes the RTX events via the 32 / 16 / 8 bit ITM write access
+  to ITM communication channel 31.
+</p>
+
+<p>Following RTX events are traced:</p>
+<ul>
+  <li>Task Create / Delete event
+    <ol>
+      <li>32 bit access. Task start address is transmitted</li>
+      <li>16 bit access. Task ID and Create/Delete flag are transmitted<br>
+          High byte holds Create/Delete flag, Low byte holds TASK ID.
+      </li>
+    </ol>
+  </li>
+  <li>Task switch event
+    <ol>
+      <li>8 bit access. Task ID of current task is transmitted</li>
+    </ol>
+  </li>
+</ul>
+
+<p class="Note">Note</p>
+<ul>
+  <li><p>Other RTOS information could be retrieved via memory read access in a polling mode manner.</p>
+  </li>
+</ul>
+
+
+<p class="MsoNormal"><span lang="EN-GB">&nbsp;</span></p>
+
+<hr>
+
+<p class="TinyT">Copyright © KEIL - An ARM Company.<br>
+All rights reserved.<br>
+Visit our web site at <a href="http://www.keil.com">www.keil.com</a>.
+</p>
+
+</body>
+
+</html>

Libraries/CMSIS/CMSIS_changes.htm

@@ -0,0 +1,320 @@
+<html>
+
+<head>
+<title>CMSIS Changes</title>
+<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
+<meta name="GENERATOR" content="Microsoft FrontPage 6.0">
+<meta name="ProgId" content="FrontPage.Editor.Document">
+<style>
+<!--
+/*-----------------------------------------------------------
+Keil Software CHM Style Sheet
+-----------------------------------------------------------*/
+body         { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family: 
+               Verdana, Arial, 'Sans Serif' }
+a:link       { color: #0000FF; text-decoration: underline }
+a:visited    { color: #0000FF; text-decoration: underline }
+a:active     { color: #FF0000; text-decoration: underline }
+a:hover      { color: #FF0000; text-decoration: underline }
+h1           { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold; 
+               text-align: Center; margin-right: 3 }
+h2           { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold; 
+               background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; 
+               padding: 6 }
+h3           { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color: 
+               #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
+pre          { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC; 
+               margin-left: 24; margin-right: 24 }
+ul           { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
+ol           { margin-top: 6pt; margin-bottom: 0 }
+li           { clear: both; margin-bottom: 6pt }
+table        { font-size: 100%; border-width: 0; padding: 0 }
+th           { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align: 
+               bottom; padding-right: 6pt }
+tr           { text-align: left; vertical-align: top }
+td           { text-align: left; vertical-align: top; padding-right: 6pt }
+.ToolT       { font-size: 8pt; color: #808080 }
+.TinyT       { font-size: 8pt; text-align: Center }
+code         { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier; 
+               line-height: 120%; font-style: normal }
+/*-----------------------------------------------------------
+Notes
+-----------------------------------------------------------*/
+p.note       { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
+/*-----------------------------------------------------------
+Expanding/Contracting Divisions
+-----------------------------------------------------------*/
+#expand      { text-decoration: none; margin-bottom: 3pt }
+img.expand   { border-style: none; border-width: medium }
+div.expand   { display: none; margin-left: 9pt; margin-top: 0 }
+/*-----------------------------------------------------------
+Where List Tags
+-----------------------------------------------------------*/
+p.wh         { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
+table.wh     { width: 100% }
+td.whItem    { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom: 
+               6pt }
+td.whDesc    { padding-bottom: 6pt }
+/*-----------------------------------------------------------
+Keil Table Tags
+-----------------------------------------------------------*/
+table.kt     { border: 1pt solid #000000 }
+th.kt        { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt; 
+               padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
+tr.kt        {  }
+td.kt        { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0; 
+               padding-left: 6pt; padding-right: 6pt; padding-top: 2pt; 
+               padding-bottom: 2pt }
+/*-----------------------------------------------------------
+-----------------------------------------------------------*/
+-->
+
+</style>
+</head>
+
+<body>
+
+<h1>Changes to CMSIS version V1.20</h1>
+
+<hr>
+
+<h2>1. Removed CMSIS Middelware packages</h2>
+<p>
+  CMSIS Middleware is on hold from ARM side until a agreement between all CMSIS partners is found.
+</p>
+
+<h2>2. SystemFrequency renamed to SystemCoreClock</h2>
+<p>
+  The variable name <strong>SystemCoreClock</strong> is more precise than <strong>SystemFrequency</strong>
+  because the variable holds the clock value at which the core is running.
+</p>
+
+<h2>3. Changed startup concept</h2>
+<p>
+  The old startup concept (calling SystemInit_ExtMemCtl from startup file and calling SystemInit 
+  from main) has the weakness that it does not work for controllers which need a already 
+  configuerd clock system to configure the external memory controller.
+</p>
+
+<h3>Changed startup concept</h3>
+<ul>
+  <li>
+    SystemInit() is called from startup file before <strong>premain</strong>.
+  </li>
+  <li>
+    <strong>SystemInit()</strong> configures the clock system and also configures
+    an existing external memory controller.
+  </li>
+  <li>
+    <strong>SystemInit()</strong> must not use global variables.
+  </li>
+  <li>
+    <strong>SystemCoreClock</strong> is initialized with a correct predefined value.
+  </li>
+  <li>
+    Additional function <strong>void SystemCoreClockUpdate (void)</strong> is provided.<br>
+   <strong>SystemCoreClockUpdate()</strong> updates the variable <strong>SystemCoreClock</strong>
+   and must be called whenever the core clock is changed.<br>
+   <strong>SystemCoreClockUpdate()</strong> evaluates the clock register settings and calculates
+   the current core clock.
+  </li>
+</ul>
+      
+
+<h2>4. Advanced Debug Functions</h2>
+<p>
+  ITM communication channel is only capable for OUT direction. To allow also communication for
+  IN direction a simple concept is provided.
+</p>
+<ul>
+  <li>
+    Global variable <strong>volatile int ITM_RxBuffer</strong> used for IN data.
+  </li>
+  <li>
+    Function <strong>int ITM_CheckChar (void)</strong> checks if a new character is available.
+  </li>
+  <li>
+    Function <strong>int ITM_ReceiveChar (void)</strong> retrieves the new character.
+  </li>
+</ul>
+
+<p>
+  For detailed explanation see file <strong>CMSIS debug support.htm</strong>. 
+</p>
+
+
+<h2>5. Core Register Bit Definitions</h2>
+<p>
+  Files core_cm3.h and core_cm0.h contain now bit definitions for Core Registers. The name for the
+  defines correspond with the Cortex-M Technical Reference Manual.  
+</p>
+<p>
+  e.g. SysTick structure with bit definitions
+</p>
+<pre>
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+  memory mapped structure for SysTick
+  @{
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                         /*!< Offset: 0x00  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                         /*!< Offset: 0x04  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                          /*!< Offset: 0x08  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                        /*!< Offset: 0x0C  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1ul << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1ul << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1ul << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1ul << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1ul << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1ul << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */</pre>
+
+<h2>7. DoxyGen Tags</h2>
+<p>
+  DoxyGen tags in files core_cm3.[c,h] and core_cm0.[c,h] are reworked to create proper documentation
+  using DoxyGen.
+</p>
+
+<h2>8. Folder Structure</h2>
+<p>
+  The folder structure is changed to differentiate the single support packages.
+</p>
+
+  <ul>
+    <li>CM0</li>
+    <li>CM3
+       <ul>
+         <li>CoreSupport</li>
+         <li>DeviceSupport</li>
+           <ul>
+             <li>Vendor 
+               <ul>
+                 <li>Device
+                   <ul>
+                      <li>Startup
+                        <ul>
+                          <li>Toolchain</li>
+                          <li>Toolchain</li>
+                          <li>...</li>
+                        </ul>
+                      </li>
+                   </ul>
+                 </li>
+                 <li>Device</li>
+                 <li>...</li>
+               </ul>
+             </li>
+             <li>Vendor</li>
+             <li>...</li>
+           </ul>
+         </li>
+         <li>Example
+           <ul>
+             <li>Toolchain 
+               <ul>
+                 <li>Device</li>
+                 <li>Device</li>
+                 <li>...</li>
+               </ul>
+             </li>
+             <li>Toolchain</li>
+             <li>...</li>
+           </ul>
+         </li>
+       </ul>
+    </li>
+     
+    <li>Documentation</li>
+  </ul>
+
+<h2>9. Open Points</h2>
+<p>
+  Following points need to be clarified and solved:
+</p>
+<ul>
+  <li>
+    <p>
+      Equivalent C and Assembler startup files.
+    </p>
+    <p>
+      Is there a need for having C startup files although assembler startup files are
+      very efficient and do not need to be changed?
+    <p/>
+  </li>
+  <li>
+    <p>
+      Placing of HEAP in external RAM.
+    </p>
+    <p>
+      It must be possible to place HEAP in external RAM if the device supports an 
+      external memory controller.
+    </p>
+  </li>
+  <li>
+    <p>
+      Placing of STACK /HEAP.
+    </p>
+    <p>
+      STACK should always be placed at the end of internal RAM.
+    </p>
+    <p>
+      If HEAP is placed in internal RAM than it should be placed after RW ZI section.
+    </p>
+  </li>
+  <li>
+    <p>
+      Removing core_cm3.c and core_cm0.c.
+    </p>
+    <p>
+      On a long term the functions in core_cm3.c and core_cm0.c must be replaced with 
+      appropriate compiler intrinsics.
+    </p>
+  </li>
+</ul>
+
+
+<h2>10. Limitations</h2>
+<p>
+  The following limitations are not covered with the current CMSIS version:
+</p>
+<ul>
+ <li>
+  No <strong>C startup files</strong> for ARM toolchain are provided. 
+ </li>
+ <li>
+  No <strong>C startup files</strong> for GNU toolchain are provided. 
+ </li>
+ <li>
+  No <strong>C startup files</strong> for IAR toolchain are provided. 
+ </li>
+ <li>
+  No <strong>Tasking</strong> projects are provided yet. 
+ </li>
+</ul>