#include        "GPIO_SYS.h"
#include "app_def.h"

extern unsigned int LocalTime;

int GPIO_SYS_init(void)
{
    GPIO_InitTypeDef GPIO_InitStructure;

    //ANDROID_POWER_RccOpen();
//    ANDROID_RESET_RccOpen();
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC |RCC_APB2Periph_GPIOD,ENABLE);    	//时钟    
    //ANDROID_V0L_RccOpen();
    //================================================
//    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
//    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
//    GPIO_InitStructure.GPIO_Pin   = ANDROID_POWER_LINE;  
//    GPIO_Init(ANDROID_POWER_Port,&GPIO_InitStructure);
//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE);
    //================================================
     GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
     GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
     GPIO_InitStructure.GPIO_Pin   = ANDROID_RESET_LINE;  
     GPIO_Init(ANDROID_RESET_Port,&GPIO_InitStructure);
     GPIO_SetBits(ANDROID_RESET_Port,ANDROID_RESET_LINE);   
    SYS_Reset();
    //================================================
//    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
//    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
//    GPIO_InitStructure.GPIO_Pin   = ANDROID_V0L_LINE;  
//    GPIO_Init(ANDROID_V0L_Port,&GPIO_InitStructure);
//    GPIO_SetBits(ANDROID_V0L_Port,ANDROID_V0L_LINE);    
//    //================================================
    GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_Out_PP;  
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
    GPIO_InitStructure.GPIO_Pin   = GPIO_Pin_1;  
    GPIO_Init(GPIOC,&GPIO_InitStructure);

//	Mcu_Reset(RESET) ;
    return 1;
}

int SYS_Reset(void)     //复位高电平有效
{
    unsigned int i=0;
   
    GPIO_ResetBits(ANDROID_RESET_Port,ANDROID_RESET_LINE);
    for(i=0;i<500000;i++)
    {
        WDG_Feed();
    }
    GPIO_SetBits(ANDROID_RESET_Port,ANDROID_RESET_LINE);
    return 1;
}

void Mcu_Reset(U08 flag) 
{
	if (flag) {
		 GPIO_SetBits(GPIOC,GPIO_Pin_1);	
	} else {
		 GPIO_ResetBits(GPIOC,GPIO_Pin_1);
	}



}
//int SYS_SetUpdate(void)
//{
//    unsigned int i=0;
//    unsigned int TempTimes=0;
//    //===========================================
//    GPIO_ResetBits(ANDROID_V0L_Port,ANDROID_V0L_LINE);                  //按下“音量+”键
//    
//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE);              //长按“Power”键
//    TempTimes=LocalTime+12000;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }
//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE);                //松开“Power”键
//    //===========================================
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }  
//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    } 
//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }    
//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================    
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }    
//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================    
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }    
//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================    
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }    
//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================    
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    } 
//    GPIO_ResetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================    
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }  
//    GPIO_SetBits(ANDROID_POWER_Port,ANDROID_POWER_LINE); 
//    //=============================    
//    TempTimes=LocalTime+500;
//    while(TempTimes>LocalTime)
//    {
//         WDG_Feed();
//    }  
//    
//    GPIO_SetBits(ANDROID_V0L_Port,ANDROID_V0L_LINE);  

//    return 1;
//}